![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 | ||
Regular Member
Join Date: Oct 2009
Posts: 131
|
G'day everyone, I'm slowly replacing parts in my car that may improve my fuel economy in my 99 AU Lane... next is my fuel regulator.. I purchased one online but have no idea where to install it... I know that I have to de-pressurise the fuel system and I know that it must be located on/near the fuel rail but not sure where it is.. can someone please post some pics?
|
||
![]() |
![]() ![]() |
![]() |
#2 | ||
5.6L x 2 pilot
![]() ![]() Join Date: Dec 2009
Location: Canbra
Posts: 14,994
|
6 or 8?
__________________
2002 AU II LTD 5.6L 342ci T3 Short, AFR165 heads, Comp XE270HR-12 Cam, Brembo 4/4s(355/330), T3 5 spokes, LC-1 wideband, Whiteline HD swaybars, TCE 3K Hi Stall, PWR Auto Trans Cooler, Koni shocks, King Low Springs, Hurricane headers, 100 cpsi cats, Twin 2.5" exhaust. Quarter Mile: 13.73 @ 105.86mph Runner Up NA/DA to BF Fairlane/LTD Geelong AFD 2024 ![]() 2002 XR8 pursuit 250 Custom twin 2.5" exhaust w Herrod modifed extractors, Tuned with Moates QH
|
||
![]() |
![]() ![]() |
![]() |
#3 | ||
FF.Com.Au Hardcore
Join Date: Aug 2006
Location: Salamander Bay
Posts: 5,427
|
if it's a 6 it is at the back of the rail and has a vacuum hose on it
__________________
[SIGPIC][/SIGPIC]
Everyone starts off with a bag full of luck and an empty bag of experience. The trick is to fill the experience bag before the luck bag is empty. "It is better to remain silent and be thought a fool than to speak out and remove all doubt." Start a new career as a bus driver Rides: FG2 XR6 stock at this stage but a very nice ride xc 4 DOOR X CHASER 5.8 UNDER RESTO |
||
![]() |
![]() ![]() |
![]() |
#4 | ||
Regular Member
Join Date: Oct 2009
Posts: 131
|
yeah its a six
|
||
![]() |
![]() ![]() |
![]() |
#5 | ||
Regular Member
Join Date: Oct 2009
Posts: 131
|
yeah i had a little look today... what is holding it in place? couldn't spot any bolts?
|
||
![]() |
![]() ![]() |
![]() |
#6 | ||
Regular Member
Join Date: Jul 2012
Posts: 108
|
There's a circlip that holds it in the rail housing. You need to remove the circlip then wrestle it out, which is difficult to do because the o-rings are tight... my regulator has vicegrip marks in it from doing this. Easier to just remove the whole fuel rail, then swap the regulators over in comfort. 4 bolts, fuel lines unclip under the car, remove intake tubing, throttle body and cable, a couple of hoses then pull the rail out.
|
||
![]() |
![]() ![]() |
This user likes this post: |
![]() |
#7 | ||
Regular Member
Join Date: Oct 2009
Posts: 131
|
is it worth cleaning anything while I'm in there such as the fuel rail? if so how?
|
||
![]() |
![]() ![]() |