|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
02-08-2013, 06:44 PM | #1 | ||
Starter Motor
Join Date: Jul 2013
Posts: 14
|
Hi all,
Does anyone know how to fix the seats in my 1977 mk2? For some reason both front seats twist when you lean back on them? Any advice on suppliers of body panels and interiors would also be appreciated. Escort 1977 mk2, 2.0 ltr GL, manual. I have only just got the old girl and don't know a lot about fixing her up. Thanks Byron |
||
02-08-2013, 07:19 PM | #2 | ||
FF.Com.Au Hardcore
Join Date: Mar 2006
Location: Mildura, Victoria
Posts: 2,425
|
Do the seats recline properly? Also, Is there alot of movement in the backrest of the seats? They usually have a small amount of backwards and forwards movement which is acceptable but if it's side to side movement then I'd be inclined to say your seats are buggered.
__________________
My Ride... 2005 BA2 XR6 Magnet Ute. |
||
02-08-2013, 08:48 PM | #3 | ||
Starter Motor
Join Date: Jul 2013
Posts: 14
|
The seats recline properly, they just twist in the backrest. I think I will just pull them apart and see what I find.
|
||
03-08-2013, 03:31 PM | #5 | ||
Regular Member
Join Date: Dec 2005
Posts: 142
|
The backrests are made from pressed metal. When they twist as described it means some of the spot welds have come adrift. The fix is to get the mig out and weld it up.
|
||
04-08-2013, 05:49 PM | #6 | ||
Tippy-tronic Free Zone
Join Date: Dec 2008
Posts: 897
|
Yup, sounds like a wedling job.
This happens due to simple metal fatigue of either the welds or the frames themselves. Escorts are very middle aged by now (40yrs +). |
||
04-08-2013, 06:41 PM | #7 | ||
Starter Motor
Join Date: Jul 2013
Posts: 14
|
Thanks for the replies guys,
I will have crack at the seats tomorrow. Still wondering if it is worth getting the old girl restored or not. Would the below costs be in the ballpark? Respray $5000 Suspension $500 Rust repairs $500 Interior $1500 Wheels tyres $1000 Byron |
||
04-08-2013, 07:51 PM | #8 | ||
Tippy-tronic Free Zone
Join Date: Dec 2008
Posts: 897
|
Hust remembered....
I had a 74 Falcon with similar symptoms (some slack, not drastic skew) where ythe backrest bolt had meerely come loose. But you find this out when you pull the side caps off the seat. |
||
04-08-2013, 11:05 PM | #9 | |||
FF.Com.Au Hardcore
Join Date: Dec 2012
Location: Adelaide
Posts: 2,252
|
Quote:
Yes a lot could be spent, Im well over 40K but mine has 450HP But only you can determine if it's worth it to you, very unlikely to get your money back, but if your passionate and keep the car your not really aiming to make money Cheers JP |
|||
12-08-2013, 12:31 PM | #10 | ||
Starter Motor
Join Date: Mar 2012
Location: Melbourne, VIC
Posts: 18
|
You can do a restoration on a budget, you just have to be prepared to sacrifice some things. Wheels and tyres are cheap. I bought my 15" superlites for under $1000, and 15's in tyres really do not cost much at all.
If you can do most of the stuff yourself (obviously with the exception of paint and such), theres no reason you couldn't stay within your budget. |
||
13-08-2013, 07:25 PM | #11 | ||
Tippy-tronic Free Zone
Join Date: Dec 2008
Posts: 897
|
I did my own restoration - panel, paint, mechanical, electrical, and the big one ...soft trimming. I spent numerous semesters at tech learning " How to..."
I'm not a mechanic/panel beater/spray painter by trade - I pound a keyboard all day. You can do it. It just takes time. It's not something you can/should rush. On a positive note, you do however learn a helluva lot along the way - dare I say 'intimate' knowledge of your car. And, overall you feel very satisfied ("I built that !!!" / "Built not bought") despite the occasional setback. And, you end up with a very well equipped workshop.... .........ready for that next 'quick restoration'. (number 5 currently underway....) Always maintain a proper perspective.....IT'S A HOBBY !!! DON"T STRESS !!! |
||