![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 | ||
Starter Motor
Join Date: Aug 2011
Posts: 14
|
Hi All
We've got an Econetic Fiesta and suffered our first flat a couple of months ago and realised that there was not a spare wheel but a can of 'Inflato-matic' crap that did not seem like a reasonable option. So I am looking for suitable rims/tyres. I know the stud pattern is a 4 x 108 and that the 14" standard rims and tyres will probably contribute something to the awesomely low fuel consumption that we enjoy. But, the likelihood of another flat and no options for changing a wheel annoys me. (lack of research when we bought it) I've chased a wreck for a spare for months with no success so I am now thinking to fit a set of mags and carry one of the standard wheels as a spare. Has anyone else got any experience or observations that might help? Is the fuel consumption likely to be dramatically affected ? Thanks
__________________
cheers Tony *************************** Our Ford Family: Ford Station Wagon June 2000 Ford Station Wagon June 2004 Ford Laser Hatch May 2000 Ford Laser Sedan May 2001 Ford Courier Tray Sep 2003 Ford Fiesta Econetic Jan 2010 - 2012 (rip) ....and a yellow Mini 1976 (Pick the odd one out!) *************************** |
||
![]() |
![]() ![]() |
![]() |
#2 | |||
Where to next??
Join Date: Oct 2006
Location: Sydney
Posts: 8,893
|
Quote:
If I read correctly, you want to buy a new set of wheels and keep an original as a spare, if this is the case it still won't match anyway unless you buy 5 new wheels. Consumption will hardly change if you change your wheels unless you go smaller with taller rubber. If you go larger diameter (but same width) with smaller sidewall you will prob maintain your consumption or even improve it slightly. |
|||
![]() |
![]() ![]() |
![]() |
#3 | ||
Peter Car
Join Date: Dec 2004
Location: geelong
Posts: 23,145
|
Go and buy one from a Ford dealer, why buy 4 new ones when you can just buy one standard wheel. Should be pretty cheap.
|
||
![]() |
![]() ![]() |
![]() |
#4 | ||
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Melb north
Posts: 12,025
|
i suspect the economy would`nt be hugely affected getting a spare and jack, but i`d be a bit dubious changing wheels and tyre brand , as the tyres where selected for low rolling resistance, after market alloys maybe heavier than factory.
|
||
![]() |
![]() ![]() |
![]() |
#5 | |||
FF.Com.Au Hardcore
Join Date: Jan 2010
Posts: 11,293
|
Quote:
|
|||
![]() |
![]() ![]() |
![]() |
#6 | |||
Flairs - Truckers Delight
Join Date: Aug 2006
Location: Brisbane Northside Likes: Opposite Lock
Posts: 5,731
|
Quote:
__________________
Current: Silhouette Black 2007 SY Ford Territory TX RWD 7-seater "Black Banger"
2006-2016: Regency Red 2000 AUII Ford Falcon Forte Automatic Sedan Tickford LPG "Millennium Falcon" |
|||
![]() |
![]() ![]() |
![]() |
#7 | ||
Regular Member
Join Date: Apr 2006
Location: Bayswater, Vic
Posts: 197
|
we recently bought a new Zetec Fiesta. Knowing they've now gotten rid of the spare on all Fiesta models we asked how much for a spare and were quoted $600, plus more for the jack, wheel brace, etc.
needless to say, we gave it a miss and are keeping a look out on ebay. |
||
![]() |
![]() ![]() |
![]() |
#8 | ||
FF.Com.Au Hardcore
Join Date: Jan 2005
Posts: 4,167
|
Post this in the Fiesta section as I think sme of the guys there will have had the same idea. By the way did you use the goo and what happened?
__________________
igodabigblackshinycar and I relented and allowed a BMW into the garage. ![]() |
||
![]() |
![]() ![]() |
![]() |
#9 | ||
not here much anymore
Join Date: Dec 2004
Location: Sthn NSW
Posts: 22,918
|
I wouldnt buy one from Ford, being an imported model they will charge you a heap. Ebay is the go.
__________________
2024 F150 XLT
|
||
![]() |
![]() ![]() |
![]() |
#10 | ||
Banned
Join Date: Feb 2008
Posts: 301
|
Fiesta wheels are junk and buckle at the slightest hint of a pothole. I'd go aftermarket.
Hopefully none of the mods like fiesta wheels or this thread will be closed and penalties will be applied. |
||
![]() |
![]() ![]() |
![]() |
#11 | |||
FF.Com.Au Hardcore
Join Date: Mar 2005
Location: Newcastle
Posts: 3,246
|
Quote:
PS Did you, really need to add the bolded part? Along with your signature... ie calling the Mods 'tossers'. You make it hard for yourself. No wonder you have trouble.
__________________
BA2 XR8 Rapid M6 Ute - Lid - Tint -18s 226.8rwkW@178kmh/537Nm@140kmh 1/9/2013 14.2@163kmh 23/10/2013 Boss349 built. Not yet run. Waiting on a shell. Retrotech thread http://www.fordforums.com.au/showthr...1363569&page=6 |
|||
![]() |
![]() ![]() |
![]() |
#12 | ||
[YEEAAH]
Join Date: Sep 2007
Posts: 120
|
There is a Ford Feista being wrecked at Deer Park Wreckers off Ballarat Rd/Western Highway in Victoria around there>
Not sure if its econetic model though
__________________
PUNKXR6 AtlantaFalcons |
||
![]() |
![]() ![]() |
![]() |
#13 | ||
Starter Motor
Join Date: Aug 2011
Posts: 8
|
Temporary Mobility Kits suck, worst idea ever.
|
||
![]() |
![]() ![]() |
![]() |
#14 | |||
FF.Com.Au Hardcore
Join Date: Feb 2008
Posts: 2,312
|
Quote:
__________________
My ride: 2007 Falcon Ute BF XR8 Orange, MTO. |
|||
![]() |
![]() ![]() |
![]() |
#15 | ||
Noobie
Join Date: Jan 2007
Location: Brisbane
Posts: 525
|
Keep an eye on ebay for a Fiesta alloy wheel. I bought one for my Zetec when my wife buckled a rim on a pothole. It came with a near new tyre for for $250. It was about $50 to courier it from Melbourne to Brisbane with Greyhound bus freight. Ford wanted $1k for a new Zetec alloy.
Alternatively, check the wreckers for any WS Fiestas. They should all have the 80km/h space saver spare.
__________________
BrisVegas WS Fiesta Zetec 3dr NM Pajero TD LWB LS Focus Zetec 5dr - gone WS Fiesta Zetec 5dr - gone |
||
![]() |
![]() ![]() |
![]() |
#16 | ||
Starter Motor
Join Date: Aug 2011
Posts: 14
|
Thanks for all the feedback.
The Fiesta Econetic is using 14" steels with low resistance tyres. Given that we are currently getting over 750k per tank of diesel even if I drop 50k per tank it is not going to worry me too much. I chased eBay, wreckers, and Ford for an exact match spare over the past 4 months or so without success. Ford new was way too expensive. The earlier model Fiesta's were apparently 15" not 14" but whatever they were no-one seems to have just one. There was a wrecker but he wanted to sell me 3 not just one. So this week I have bought a used set of 15" Focus alloys and tyres that I'll fit up on Saturday and see how that works. With the tyres this will be a higher profile so I'll need to check if there is any issue with the centre offset or potential rubbing. If thats all ok then I'll need to check if the speedo needs to be changed to clock correctly. Will probably sell the 14" rims with the tyres (17,000k of light traffic wear) as spares for other Fiesta Econetic drivers. Offers?
__________________
cheers Tony *************************** Our Ford Family: Ford Station Wagon June 2000 Ford Station Wagon June 2004 Ford Laser Hatch May 2000 Ford Laser Sedan May 2001 Ford Courier Tray Sep 2003 Ford Fiesta Econetic Jan 2010 - 2012 (rip) ....and a yellow Mini 1976 (Pick the odd one out!) *************************** |
||
![]() |
![]() ![]() |
![]() |
#17 | |||
Starter Motor
Join Date: Aug 2011
Posts: 14
|
Quote:
In the past (a very long time ago) when the canned goo was first around I recall that it had a detrimental effect on the tyre life. Cannot recall what it did but it was something like damaging the internal structure of the tyres resulting in a much shorter life and once done could not be used again on the same tyre.
__________________
cheers Tony *************************** Our Ford Family: Ford Station Wagon June 2000 Ford Station Wagon June 2004 Ford Laser Hatch May 2000 Ford Laser Sedan May 2001 Ford Courier Tray Sep 2003 Ford Fiesta Econetic Jan 2010 - 2012 (rip) ....and a yellow Mini 1976 (Pick the odd one out!) *************************** |
|||
![]() |
![]() ![]() |
![]() |
#18 | ||
Regular Member
Join Date: May 2009
Posts: 50
|
Try an old Cortina rim, they are 4 x 108. They are 13's but you should be able to find one cheap anywhere. If you are in Sydney I have one if you want to see if it fits. ALternatively the space saver spare fron a Saab 900 is 4 x 108 also, I think they are 15's. They are about $50 from a wreckers.
Peter |
||
![]() |
![]() ![]() |
![]() |
#19 | ||
Join Date: Dec 2004
Location: Sidonee
Posts: 1,062
|
It is only the rolling diameter that matters, not the size of the rim. This is what you need to check. Tell us the tyre size of both wheels and we can tell you if you need to worry about the speedo being out.
__________________
Fordless..... ![]() |
||
![]() |
![]() ![]() |
![]() |
#20 | ||
Regular Member
Join Date: May 2009
Posts: 50
|
True, but the wheel needs to clear brakes and suspension parts. So a 13 inch wheel may not clear, also a 15 inch wheel may not fit depending on the design. Unless its a Fiesta wheel, its trial and error. Being a spare, rolling diameter shouldn't be that much of an issue, they are only meant to be on for a short amount of time.
|
||
![]() |
![]() ![]() |
![]() |
#21 | ||
Ford Fiesta
Join Date: Sep 2009
Location: Melbourne
Posts: 235
|
You'll definitely see an increase in the fuel economy ...
The Econetic tyres are special "low rolling resistance" ones and the hubcaps are also designed to maximise aerodynamics. In addition, the undercarriage of the Econetic has some different coverings and fittings (I believe) so you want to be careful re: any interference. I am not sure whether your Focus wheels will fit. The Fiesta wheels are 4x108 (although the Thai-built Fiesta's have slightly diff measurements, but there's a whole thread on that in the Fiesta section). However you'll have to check the offset and they may have to be re-drilled. I would also check with Ford re: warranty. Fitting non-standard wheels of a different size/spec to the Fiesta rims shouldn't void your warranty, but may cause trouble with the Ford people ... Basically IMO you would be better looking at finding a space-saver spare from a WS series Fiesta (they all have them in the boot, find a wreck) and using that ... Or trying a 13" Cortina wheel also ... |
||
![]() |
![]() ![]() |
![]() |
#22 | ||
LZ Titanium Focus
Join Date: Aug 2011
Posts: 24
|
I got a 2nd hand set of WS fiesta steel rims and tyres (new) when I first brought my econetic as I didn't want to drive around with only a puncture kit. I asked the dealer originally how much and yes they quoted high hundreds by the time I get the jack,wheel brace,wheel,tyre,foam moulding etc.
So I just brought a set cheap(no one was just selling one) and removed the puncture kit foam moulding which reveals a spare wheel sized hole in which I replaced one of the 15" wheels, jack, and tyre iron I picked at at a garage sale. I dont care that it is 15" as it will only be on the car for minimum km's if required. Little rag to stop any rattles and have never hear a thing, but can now drive with confidence that I can fix a flat the old fashioned way. I have always had it in the car so I cannot compare my fuel economy but I get over 850km to a tank. Average of 4.55 litres/100km for the 15000km. I have never taken it on a long trip so that is all city/suburban driving(I do use cruise control all the time). Not a great fan of the low rolling resistance tyres as they skid even with ABS working. I had to change a tail light the other day and it was a different experience, never had to pull out whole assembly before just to change a bulb. The plastic holding the globe assembly is pretty dodgey and seemingly fragile. I do keep rubbing the front spoiler on things as the car is lower than other fiesta's and they wouldn't have allowed for that when parking against standard curbs. Overall happy with the car, as it was brought as a single person run about 90% of the time and did want to spend heaps on fuel. I fill it up once a month and the 40 ltr tank cannot cost that much even at diesel prices. The fiesta geometry and balance is well setup so it is a plesure to drive and you can throw it around without feeling it is going to let go. |
||
![]() |
![]() ![]() |
![]() |
#23 | ||
Starter Motor
Join Date: Aug 2011
Posts: 14
|
Hi All
Thanks for all the feedback. I ended up buying a reasonably priced set of four Fiesta 15" mags with unused tyres (still had the moulding nipples in the rubber) complete with nuts. I am now hunting another to make a set. I did a lot of measuring during the fitting to ensure that they would not foul on anything like the struts or guards etc. The stud pattern is correct as 4 x 108. Once fitted the clearance of the inside tyre surface to the strut on the front is reduced from 45mm to 25mm which does not appear to affect it either on or off the jack. The rear clearance was basically the same but the rear had a bigger clearance to start at 65mm between the shocker and the tyre. I've had it out doing some relatively hard cornering with no scrapes or rubbing that I can detect. I can imagine that on a hard-lock turn at speed with a bump it will do some damage but then that is probably true of any vehicle. For the economy concious the extra weight per corner is 4kg. 12.3kg for the 14" steel vs 16.3kg for the mag wheel & tyre. So overall the weight increase would be 16kg's on the road plus the spare and a few more for the jack etc. Probably an extra 40kg in total. They have been fitted for about 3 or 4 weeks and the local running that the car is used for has not changed, i.e. the same usage pattern has given us no change in consumption. I have one of the originals as the spare at the moment but will swap that out when I get mag #5. I'll wait another couple of weeks to verify consumption etc and will probably be selling the Econetic originals if anyone wants a spare!
__________________
cheers Tony *************************** Our Ford Family: Ford Station Wagon June 2000 Ford Station Wagon June 2004 Ford Laser Hatch May 2000 Ford Laser Sedan May 2001 Ford Courier Tray Sep 2003 Ford Fiesta Econetic Jan 2010 - 2012 (rip) ....and a yellow Mini 1976 (Pick the odd one out!) *************************** |
||
![]() |
![]() ![]() |
![]() |
#24 | ||
2008 BF Futura
Join Date: Sep 2005
Location: Adelaide, S.A.
Posts: 595
|
My wife has 16" Ford Focus Rims (4 stud) on her Fiesta.
![]()
__________________
2008 BF Falcon Futura 2009 BF Falcon Wagon Dedicated LPG Previous Cars: 2003 BA Falcon Wagon Dedicated LPG 1999 Ford Fairlane Ghia XF Fairmont Ghia Escort MK2 RS2000 Replica |
||
![]() |
![]() ![]() |
![]() |
#25 | ||
Regular Member
Join Date: Oct 2009
Posts: 101
|
I have 3 econetic wheels with the original michelin tyres sitting in the garage if anyone is interested in buying one r 3 for spares. They have covered about 8000kms
|
||
![]() |
![]() ![]() |
![]() |
#26 | |||
Starter Motor
Join Date: Dec 2011
Posts: 1
|
Quote:
|
|||
![]() |
![]() ![]() |
![]() |
#27 | ||
Starter Motor
Join Date: May 2014
Posts: 1
|
Will the alloys off a 2011 zetec (16") fit a 2010 Econetic ?
just want to know if stud pattern and offset are OK. |
||
![]() |
![]() ![]() |