Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 22-05-2014, 03:05 PM   #1
leonbray
Cougar Owner
 
leonbray's Avatar
 
Join Date: Feb 2005
Location: Brisbane
Posts: 178
Default Coolant moving around in expansion bottle

Just noticed that the coolant is bouncing about in the expansion bottle chamber above the main hose.

When the revs change as the a/c compressor cuts in and out it sends a spurt of coolant into the bottle.

It doesn't look like bubbles from a head gasket and the engine is running OK and not using any coolant

Is this normal or the signs of a head gasket problem

__________________
Leon


AUIII XLS with Tickford bits, 1968 XR7 (302W 4v roller cam), 1969 Convertible (302W),
leonbray is offline   Reply With Quote Multi-Quote with this Post
Old 22-05-2014, 03:36 PM   #2
aussiblue
FG XR6 Ute & Sedan
Donating Member3
 
Join Date: Oct 2006
Location: Bibra Lake WA
Posts: 23,521
Technical Contributor: For members who share their technical expertise. - Issue reason: Has been floating around the oze tech section for a long time and is always there to give advice when people have an issue. 
Default Re: Coolant moving around in expansion bottle

Not normal but check for soft/ collapsing radiator hoses and try a new pressure cap first.
__________________
regards Blue
aussiblue is offline   Reply With Quote Multi-Quote with this Post
Old 23-05-2014, 09:54 AM   #3
auIILTD
5.6L x 2 pilot
Donating Member2
 
auIILTD's Avatar
 
Join Date: Dec 2009
Location: Canbra
Posts: 15,055
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: For the effort put into the Australia day cruise to Albury Tech Writer: Recognition for the technical writers of AFF - Issue reason: AU Tech article. 
Default Re: Coolant moving around in expansion bottle

I have had the same problem. Change of radiator cap and thermostat corrected the issue.

Cheers
Stu
__________________
2002 AU II LTD

5.6L 342ci T3 Short, AFR165 heads, Comp XE270HR-12 Cam, Brembo 4/4s(355/330), T3 5 spokes, LC-1 wideband, Whiteline HD swaybars, TCE 3K Hi Stall, PWR Auto Trans Cooler, Koni shocks, King Low Springs, Hurricane headers, 100 cpsi cats, Twin 2.5" exhaust.

Quarter Mile: 13.73 @ 105.86mph


Runner Up NA/DA to BF Fairlane/LTD Geelong AFD 2024

2002 XR8 pursuit 250

Custom twin 2.5" exhaust w Herrod modifed extractors, Tuned with Moates QH
auIILTD is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 23-05-2014, 05:42 PM   #4
Davehoos
FF.Com.Au Hardcore
 
Join Date: Sep 2013
Location: Karuah Valley
Posts: 984
Default Re: Coolant moving around in expansion bottle

Quote:
Originally Posted by auIILTD View Post
I have had the same problem. Change of radiator cap and thermostat corrected the issue.

Cheers
Stu
coolant doesn't move until the thermostat opens-it its open when cold it needs to be replaced-it should not move too much when first started.

Then
clamp off the hose from the thermostat to the bottle-the radiator may need clogged.
__________________
BF11 XT EGas Wagon-SY TERRITORY AWD GHIA-
Land Rover 88
.MIDCOAST NSW.
Davehoos is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Reply


Forum Jump


All times are GMT +11. The time now is 04:52 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL