|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
06-09-2014, 05:19 PM
|
#1 | ||
|
Regular Member
Join Date: Jul 2012
Location: Sydney, Australia
Posts: 119
|
Hi guys, I picked up an AU auto with 146k on the clock and engine is pretty smooth, but sounds like it has a noise bearing in the water pump (common?)
Also, seems like the transmission is locked in 3rd? What's the remedy to fix this? Heard it's the ecu in limp mode? Other than that, the tranny is smooth Going to change oils and coolant when doing water pump Cheers |
||
|
|
|
06-09-2014, 08:32 PM
|
#2 | ||
|
Regular Member
Join Date: Jan 2011
Posts: 45
|
G'day Brad, my water pump lasted a bit over 400k and had to replace about 5 years ago, about $50 for pump off ebay & $8 gasket glue, easy to fix yourself. If you replace the oil & filter in the tranny, make sure you get a new rubber gasket for the sump & don't over torque the bolts or it will leak like a sieve. I think you can get a kit to do the transmission service. Hope it fixes the problem. Maybe someone else with a bit more knowledge of the transmission can shed some light on why it's not changing into fourth. Good luck with it mate.
Cheers. Mark. |
||
|
|
|
AU 6cyl auto
Linear Mode
