Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Fiesta, Festiva and Ka

Reply
 
Thread Tools Display Modes
Old 30-03-2014, 08:29 PM   #1
hawkeye66
Starter Motor
 
Join Date: Mar 2014
Posts: 7
Default WQ Fiesta timing belt

Can anyone tell me if dropping 2 teeth on the timing belt will damage the 1.6 duratec engine.

hawkeye66 is offline   Reply With Quote Multi-Quote with this Post
Old 31-03-2014, 10:17 AM   #2
russellw
Chairman & Administrator
Donating Member3
 
russellw's Avatar
 
Join Date: Dec 2004
Location: 1975
Posts: 107,331
Community Builder: In recognition of those who have helped build the AFF community. - Issue reason: Raptor: For Continued, and prolonged service to the wider Ford Community 
Default Re: WQ Fiesta timing belt

What do you mean by 'dropping' teeth?
__________________

__________________________________________________

Observatio Facta Rotae


russellw is offline   Reply With Quote Multi-Quote with this Post
Old 04-04-2014, 06:48 PM   #3
hawkeye66
Starter Motor
 
Join Date: Mar 2014
Posts: 7
Default Re: WQ Fiesta timing belt

By dropping teeth i mean the timing belt has gone slack and the belt has jumped two teeth out of time with the cam shaft.I have since found out that this has been terminal for the engine as it has been re timed and sounds like a diesel,many bent valves.Engine had only done 97000 kms.
hawkeye66 is offline   Reply With Quote Multi-Quote with this Post
Old 09-10-2014, 04:18 PM   #4
b weetman
Starter Motor
 
Join Date: Jul 2013
Location: Bondi
Posts: 3
Default Re: WQ Fiesta timing belt

Would have to. Maintenance schedule recommends timing belt and valves at 120000. Not looking forward to that, ours has done 90,000. How did the belt slip, were you revving it over 4?
b weetman is offline   Reply With Quote Multi-Quote with this Post
Old 09-10-2014, 10:26 PM   #5
Pursya
Regular Member
 
Join Date: Jul 2012
Posts: 497
Default Re: WQ Fiesta timing belt

As the maintanence schedule says 120k for belt replacement I would be having a chat to Ford about some contribution to the replacement engine.
I did a supercharger on a Eunos 800M when it was 8 years old and had done 100k.
Mazda paid for the new supercharger but still cost me 3k to fit it!
Pursya is offline   Reply With Quote Multi-Quote with this Post
Old 11-10-2014, 03:10 PM   #6
oemdenied
Regular Member
 
Join Date: Aug 2014
Posts: 54
Default Re: WQ Fiesta timing belt

Unless the car has been maintained by a Ford dealer and it is still in warranty, which is wont be. I highly doubt Ford will contribute to your engine.
Belt replacement time is dictated by km and time.
Reving the engine over 4k has nothing to do with the failure. The 1.6 duratec is a high reving engine that makes all of its power high up in the rev range. The 1.7 FRP variant makes peak power at 7000rpm with a rev limit of 7200rpm.
Lots of factors could have contributed to the failure such as oil leaking onto the belt, a foreign object fallen in past the cover etc.
Your cheapest option will probably be to source a 2nd hand engine and have it fitted - replace water pump and cambelt BEFORE install at the very least.
__________________
Advertising removed.
oemdenied is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 13-10-2014, 07:38 PM   #7
Pursya
Regular Member
 
Join Date: Jul 2012
Posts: 497
Default Re: WQ Fiesta timing belt

My Eunos was not maintained exclusively by Mazda.
And I was not the original owner.
And it was three years beyond warranty.
Belts should be dictated by kms and if it has failed before that time I think you have a valid claim.
Under Australian consumer laws the item must be fit for purpose. And if the belt has failed well ahead of the scheduled replacement you could argue that it was not fit for purpose.
Remember that the scheduled replacement that a car manufacturer would specify for this part would be much much earlier than their testing would indicate it would fail.
Pursya is offline   Reply With Quote Multi-Quote with this Post
Old 14-10-2014, 12:41 AM   #8
oemdenied
Regular Member
 
Join Date: Aug 2014
Posts: 54
Default Re: WQ Fiesta timing belt

Quote:
Originally Posted by Pursya View Post
My Eunos was not maintained exclusively by Mazda.
And I was not the original owner.
And it was three years beyond warranty.
Belts should be dictated by kms and if it has failed before that time I think you have a valid claim.
Under Australian consumer laws the item must be fit for purpose. And if the belt has failed well ahead of the scheduled replacement you could argue that it was not fit for purpose.
Remember that the scheduled replacement that a car manufacturer would specify for this part would be much much earlier than their testing would indicate it would fail.
You are very very lucky they contributed but I can see why they bought the part under goodwill and you paid for it. A supercharger is not a consumable part that is designed to be replaced so it would come under fair use guidelines. Please don't confuse goodwill and warranty as they are 2 very different things.

Service schedules in the owners manual quite clearly state KM or time which ever comes first for all services. To enable a warranty to be valid it must be followed. The 3 most important rules in a nutshell being: Services must be carried out by a qualified mechanic, at the appropriate intervals, using OEM parts or OEM equivalent quality items (such as Ryco for oil filters) If you fail to meet those 3 rules you should and more than likely would lose a court case if you tried to go down that route as if the conditions of warranty are not met; why should you get a repair carried out free of charge under warranty?

In the case of Timing belts, time IS an important factor that can not be ignored due to deterioration of the belt over time regardless of if the car travels distance or not.

By consumer law the car is fit for purpose and was right up until the timing belt was not replaced at the manufacturer's recommended replacement interval.
__________________
Advertising removed.
oemdenied is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 05:51 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL