|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
07-10-2014, 07:43 AM | #1 | ||
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
Is this a common problem
are there any adjustments possible to remedy this will check the engine mounts symptom as soon as it is put in fifth it gets stuck fast and hard every other gears selection and changing is fine while driving clutch is fine - slave no leaks or problems no crunching or other noises in the box oil level ok
__________________
My car goes Brumm Brumm |
||
07-10-2014, 08:00 AM | #2 | ||
Brad
Join Date: Jul 2010
Location: New Zealand
Posts: 5,827
|
Pretty sure these use two cables too shift the gearbox, I also think that there is a little it of play where they connect that could cause an issue like this.
__________________
Silhouette BF MKII F6 Plazmaman Intercooler Kit, ID1000, 34mm Internal Wastegate and Turbosmart Actuator, Tein Coilovers, Focal Audio, XXR 521 18x8.5 18x10 |
||
07-10-2014, 09:51 AM | #3 | ||
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
I wish it was cables
I wish it was just the bush to replace ..car drives so well gear stick isnt sloppy the other gears and reverse pops in and out easy as this 1.5 manual box wants to be to be a pain has a single shift rod into the box and a stay bar thanks to Big Damo post 12 second picture scan 41-B10 this link http://www.fordforums.com.au/showthread.php?t=11425382
__________________
My car goes Brumm Brumm Last edited by dirty hands; 07-10-2014 at 10:04 AM. |
||
13-10-2014, 06:28 PM | #4 | ||
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Melb north
Posts: 12,025
|
where is the clutch cutting in? if its very close to the floor and the clutch is adjustable,
i would try adjusting it up just a tad and see if it makes a difference. |
||
13-10-2014, 07:42 PM | #5 | ||
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
. cant get into it
.hope the owner finds his keys . .clutch pedal length and adjustments will check
__________________
My car goes Brumm Brumm |
||
29-10-2014, 12:26 AM | #6 | ||
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
owner found the keys today
and will have the cash soon to take out and refit another gearbox not helping 35 degree heat plus days . in the open on sloping pavers no power points
__________________
My car goes Brumm Brumm |
||
17-11-2014, 10:53 PM | #7 | ||
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
got a text from the owner --two days ago
he is going to sell the fiestiva as is i should be greatful and not ****ed off
__________________
My car goes Brumm Brumm |
||
2 users like this post: |