|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
24-05-2015, 10:13 AM
|
#1 | ||
|
Starter Motor
Join Date: May 2015
Posts: 2
|
Hi all I need some help quick.
I have AU 1 / I Fairmont Ghia Tickford series. With this cluster / instrument Attachment 87809 https://lh6.googleusercontent.com/pr...g=w597-h246-nc And replacing with this one AU 2 / II Tickford dash from image.jpg My problems are this: My oil pressure dial not working My fuel and speed averages and dte don't work on the climate control My interior lights do not work when door is open but ajar symbol dose Everything els was a good swap fully functioning with drams I need help on these issues Last edited by Tickford08; 24-05-2015 at 10:15 AM. Reason: Image did not load |
||
|
|
|
24-05-2015, 10:21 AM
|
#2 | ||
|
Starter Motor
Join Date: May 2015
Posts: 2
|
And unsure if low Coolant has a function on the dash
|
||
|
|
|
|
24-05-2015, 02:37 PM
|
#3 | ||
|
Next upgraded Mk1 Leopard
 
Join Date: Jan 2005
Location: Sydney, in the burbs
Posts: 4,913
 
|
I did this
http://www.fordforums.com.au/showthr...1238536&page=5 but I had a series II standard cluster. The above is what I did to make it work for an AUII Forte. Look on page 2 of the tech guides as well UK
__________________
Plastic Surgery 1 AUII Monsoon Blue How 2's: Change rear view mirror, Install backfire valve, Change foam front seats, Install auto transmission cooler, Replace Trans Shift Globe, Remove front door Trim, Paint AU headlights, install door spears, Premium Rear Parcel Shelf, go here...
 |
||
|
|
|
|
24-05-2015, 03:11 PM
|
#4 | |||
|
You can't stop the signal
Join Date: Nov 2005
Location: Behind a computer at work
Posts: 1,624
|
1: XR is a faux oil gauge. It works on a pressure switch same as low series dashes. You need to swap the sensor on the engine.
2: XR dash doesn't have the data output like the Fairmont. Don't believe there is a solution. If there is, it's something internal to the clusters. 3: Fairmont has input for each door, XR only has 1 input for all. You need to bridge all four door wires into 1 (driver's from memory)
__________________
Quote:
Last edited by superroo; 24-05-2015 at 03:18 PM. |
|||
|
|
|
Help au instrument cluster
Re: Help au instrument cluster
Re: Help au instrument cluster
Linear Mode
