|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
11-04-2016, 09:14 PM
|
#1 | ||
|
Starter Motor
Join Date: Apr 2016
Posts: 3
|
Hi guys and gals, I have a 2007 focus in my possession courtesy of my mum who destroyed the clutch out front of my house, literally no clutch plate left. I'm trying to get it back on the road for her.
It seems that replacing clutches got extremely expensive in the last few years as I'm being quoted $3k from 2 different mechanics to do this. I realize there is the added cost of the dual mass flywheel but $3k seems insane. I'm being told the clutch kit and DMF cost $2300 !!! Is this the going rate for these cars ? Or am I better off getting the kit from the usa, which seems possible for $700 landed for an exedy clutch+DMF. Sorry for the first post begging but I'm getting desperate. |
||
|
|
|
12-04-2016, 09:43 AM
|
#2 | ||
|
Marko
Join Date: Jul 2011
Location: Rotorua, NZ
Posts: 76
|
No that's about right. Be careful getting from the States as their models did differ in various ways from the Euro built models elsewhere.
Sent from my SM-G900I using Tapatalk
__________________
May the FORD be with you! |
||
|
|
|
| This user likes this post: |
|
13-04-2016, 07:49 PM
|
#4 | ||
|
Regular Member
Join Date: Oct 2009
Posts: 101
|
You can buy the clutch kit and dmf off ebay for $1000 and its not that hard to fit yourself if your half handy on the tools
|
||
|
|
|
|
13-04-2016, 08:08 PM
|
#5 | ||
|
Starter Motor
Join Date: Apr 2016
Posts: 3
|
Yeah I would have a crack myself but getting it uo my steep driveway was going to be a challenge in itself. I really wanted to do it. Ended up finding a mech to do it for 2300 so I decided to just get it done.
|
||
|
|
|
2007 focus clutch help
Linear Mode
