|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
10-11-2017, 08:50 PM
|
#1 | ||
|
Starter Motor
Join Date: May 2017
Posts: 16
|
Hello,
Having some issues fitting the front parcel shelf to my mk1 Capri. Any tips? Issues going deep enough due heater ducting and Loom wiring near drivers side. It’s one of the repro fibreglass Ones so I guess there’s a decent chance of construction error, as well as my car probably isn’t a straight As it was in 1970.. any tips appreciated thank u Sent from my iPhone using Tapatalk |
||
|
|
|
20-11-2017, 09:39 PM
|
#2 | ||
|
Starter Motor
Join Date: Aug 2012
Posts: 3
|
Chefo
I haven't had any experience with the fibreglass trays but they all need a bit of trimming to fit. It is not that difficult with the thick cardboard type material in the original ones as you can cut or file bits easily. Not sure how you will do that with the f/g. Sometimes there is also a screw or something that is preventing it from sliding all the way in. Have fun! Ian |
||
|
|
|
Front parcel shelf Capri fitting
Linear Mode
