![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 | ||
Regular Member
Join Date: Apr 2006
Posts: 74
|
Hi out there. My grandson has a 2006 CL Focus with a harmonic balancer seal leak. From what I have gleaned on the interweb, the replacement needs spacialised tools.
Is this so? No just pull the balancer off, replace the seal, chuck the balancer back on ?? Cheers |
||
![]() |
![]() ![]() |
![]() |
#2 | ||
FF.Com.Au Hardcore
Join Date: Mar 2013
Posts: 7,645
|
You need a special tool to install the seal utilizing the bolt to press on the seal with the tool. It holds the out edge of the seal open outways if that makes sense.
|
||
![]() |
![]() ![]() |
![]() |
#3 | ||
Regular Member
Join Date: Apr 2006
Posts: 74
|
Yep, I follow. I also believe that the balancer is not keyed to the shaft, so special tools are needed to hold the crank still??
|
||
![]() |
![]() ![]() |
![]() |
#4 | ||
FF.Com.Au Hardcore
Join Date: Mar 2013
Posts: 7,645
|
Yes thats true too, how ever if your only changing a seal you may get away with it if you mark everything up and remove balancer in the TDC #1 position. That would be more necessary if you were replacing a belt/chain etc.
|
||
![]() |
![]() ![]() |