Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Focus
Reload this Page 2006 focus crank seal
Register FAQ Calendar

Reply
 
Thread Tools Display Modes
Old 29-10-2020, 07:07 PM   #1
creeture3
Regular Member
 
Join Date: Apr 2006
Posts: 74
Default 2006 focus crank seal
Hi out there. My grandson has a 2006 CL Focus with a harmonic balancer seal leak. From what I have gleaned on the interweb, the replacement needs spacialised tools.

Is this so? No just pull the balancer off, replace the seal, chuck the balancer back on ??

Cheers
creeture3 is offline   Reply With Quote Multi-Quote with this Post
Old 31-10-2020, 05:02 PM   #2
GTLEGEND
FF.Com.Au Hardcore
 
Join Date: Mar 2013
Posts: 7,707
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Every advice post I visit where OP are seeking advice for their new vehicle, he is there and adds valuable support and advice for rectifying the problem. Really is a Legend. Technical Contributor: For members who share their technical expertise. - Issue reason: The quality of information he provides is in depth and highly valued by those posting questions. 
Default Re: 2006 focus crank seal
You need a special tool to install the seal utilizing the bolt to press on the seal with the tool. It holds the out edge of the seal open outways if that makes sense.
GTLEGEND is offline   Reply With Quote Multi-Quote with this Post
Old 01-11-2020, 10:06 PM   #3
creeture3
Regular Member
 
Join Date: Apr 2006
Posts: 74
Default Re: 2006 focus crank seal
Yep, I follow. I also believe that the balancer is not keyed to the shaft, so special tools are needed to hold the crank still??
creeture3 is offline   Reply With Quote Multi-Quote with this Post
Old 01-11-2020, 10:24 PM   #4
GTLEGEND
FF.Com.Au Hardcore
 
Join Date: Mar 2013
Posts: 7,707
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Every advice post I visit where OP are seeking advice for their new vehicle, he is there and adds valuable support and advice for rectifying the problem. Really is a Legend. Technical Contributor: For members who share their technical expertise. - Issue reason: The quality of information he provides is in depth and highly valued by those posting questions. 
Default Re: 2006 focus crank seal
Quote:
Originally Posted by creeture3 View Post
Yep, I follow. I also believe that the balancer is not keyed to the shaft, so special tools are needed to hold the crank still??
Yes thats true too, how ever if your only changing a seal you may get away with it if you mark everything up and remove balancer in the TDC #1 position. That would be more necessary if you were replacing a belt/chain etc.
GTLEGEND is offline   Reply With Quote Multi-Quote with this Post
Reply

« Previous Thread | Next Thread »

Forum Jump


All times are GMT +11. The time now is 07:21 PM.

Australian Ford Forums - Privacy Statement - Terms of Service - Top

Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL