|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
16-07-2021, 11:25 AM
|
#1 | ||
|
Starter Motor
Join Date: Apr 2021
Posts: 2
|
My MB Mondeo TDCI was leaking diesel from the leakoff pipe at the base of number one injector. I contacted the local Ford dealer to buy a new O ring, but they will only sell a complete pipe set ($250). After some searching I managed to source some O rings, and five minutes work fixed the problem. I have more O rings on hand, so if anyone else has the same problem, message me and I’ll send you some.
|
||
|
|
| This user likes this post: |
|
16-07-2021, 01:33 PM
|
#3 | |||
|
Starter Motor
Join Date: Apr 2021
Posts: 2
|
Quote:
I used 4mm ID x 1.5mm viton O rings. It was a tight fit into the injector, and visually it looked like the originals might be 1.3mm, but it is hard to know as mine was leaking, so perhaps had shrunk over the years. |
|||
|
|
|
| This user likes this post: |
|
16-07-2021, 01:42 PM
|
#4 | ||
|
Starter Motor
Join Date: Sep 2018
Posts: 9
|
Legend
 Sent from my SM-J810Y using Tapatalk |
||
|
|
|
Leakoff pipe O rings
Linear Mode
