|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
19-09-2021, 10:51 PM
|
#1 | ||
|
Starter Motor
Join Date: Aug 2021
Location: mt mitchell nsw
Posts: 7
|
hi i have a ls xr5 turbo witch has been crunching 1 and 2 gear if i hold the clutch in and wait 20 30 seconds it smooth just looking for cheapest fix if one thanks
|
||
|
|
|
20-09-2021, 09:38 AM
|
#2 | ||
|
Chairman & Administrator
  
Join Date: Dec 2004
Location: 1975
Posts: 107,288
|
There are known issues with the 1-2 synchros on the M66W boxes and Ford did replace a few under warranty. As far as I know they are not serviceable at all unlike the MMT6 fitted to other 6-speed models.
There's actually an M66W with a cracked rear housing on E-bay at the moment cheap and if you were comfortable changing over the housing it might be a better option. You could also try changing the oil - Ford recommend Trans Fluid BO-VC specification WSS-M2C200-C3 but some of the Euro guys have used a full synth equivalent with success.
__________________
 Observatio Facta Rotae
|
||
|
|
|
|
20-09-2021, 10:11 AM
|
#3 | ||
|
Starter Motor
Join Date: Aug 2021
Location: mt mitchell nsw
Posts: 7
|
ok thanks for that info i have just changed oil and a little better was thinking of using some additive to see wot happens and just wondering if any one knows how to fix the odometer it reads 999999 thanks
|
||
|
|
|
|
20-09-2021, 10:54 AM
|
#4 | ||
|
Chairman & Administrator
Join Date: Dec 2004
Location: 1975
Posts: 107,288
|
You'd need access to IDS or another scanner that can program the cluster. Any scan tool will be able to read the correct mileage as it's stored but very few can change it.
You can try disconnecting the battery for awhile and see if the cluster reads back the correct value.
__________________
Observatio Facta Rotae
|
||
|
|
|
|
20-09-2021, 09:20 PM
|
#5 | ||
|
Starter Motor
Join Date: Aug 2021
Location: mt mitchell nsw
Posts: 7
|
ok thanks alot i will try that thanks for the help
|
||
|
|
|
ls xr5 focus gearbox problems
Linear Mode
