|
|
|
|
|
|||||||
| OzECruisers General Discussions E/N/D vehicles General Discussion ONLY. NO TECH THREADS |
 |
|
|
Thread Tools | Display Modes |
30-07-2006, 12:22 PM
|
#1 | ||
|
Apprentice Fridgey
Join Date: Aug 2005
Location: In a lil place called Gladstone aka. Glad2bstoned
Posts: 114
|
I've almost got all my parts for my head rebuild, i've got the Crow XR6 valve springs, forged stainless valves, mabye a new set of lifters, almost got the money for the new cam, looking at getting the Wade 1636. Then might get a little bit of head work done. I'm hoping to crack the 14's as i got a 15.6 at my last run just by dropping my exhaust off at the extractors (still had air filter and spare tyre in) should hopefully all be done within the next 2 months. :evil_laug
__________________
96 EF Falcon Futura, Powered by Microtech, 2222549 Crow Cam, Metal Gasket, Port and Polish, Oversized Forged Valves, EF Fairmont Dash, K&N Highflow Filter, Pacemaker Competition Extractors, 2 1/2 Mandrel Bent Exhaust, High Flow Cat, Converter Shop 3500 stall, Shift Kit, 4.11 Diff Ratio, Mini Spool Best ET 14.654 @ 88.270Mph at Benaraby Raceway, Gladstone Queensland |
||
|
|
|
30-07-2006, 12:28 PM
|
#2 | ||
|
What Wheelspin?
Join Date: May 2005
Location: Victoria
Posts: 2,378
|
did u buy the valves from crow as well? how much were they? and were they bigger than standard?
__________________
2016 FGX XR8 (KPM StreetFighter Kit 455rwkw) 2003 BA Xr6 Turbo (Atomic Long, DTM auto, Nizpro stage2 kit, eaton truetrac, E85, HeadsexTuned) |
||
|
|
|
|
30-07-2006, 12:36 PM
|
#3 | ||
|
Apprentice Fridgey
Join Date: Aug 2005
Location: In a lil place called Gladstone aka. Glad2bstoned
Posts: 114
|
i ordered them from autobarn, when i pick them up ill ask where they ordered them from, they were only standard size, the guy that is machining the head said it's to risky going any bigger so i just got heavier ones, the were $17 for inlet and $15 for exhaust, all up i think was about $195
__________________
96 EF Falcon Futura, Powered by Microtech, 2222549 Crow Cam, Metal Gasket, Port and Polish, Oversized Forged Valves, EF Fairmont Dash, K&N Highflow Filter, Pacemaker Competition Extractors, 2 1/2 Mandrel Bent Exhaust, High Flow Cat, Converter Shop 3500 stall, Shift Kit, 4.11 Diff Ratio, Mini Spool Best ET 14.654 @ 88.270Mph at Benaraby Raceway, Gladstone Queensland |
||
|
|
|
New head almost ready
Linear Mode
