Genuine Ford Parts

[Mechan1k]

G'day GTLEGEND

I picked up a FG XR6 centre interior light (twin light version).
Looking at replacing my FG XT standard small dome light.

Just wanted to know if there are any other brackets required for the larger unit .... of i just need my headlining trimmed (while I get the whole thing re-trimmed) and it just uses the rear pop-in mounts into the roof frame (and the front slide/plastic hooks?

Thought I'd ask before I embark on this small journey.

[FoxtrotGolfXray 5.0]

Hey GT, you might be able to resolve a discussion happening in the pub re genuine FG X XR8 floor mats. Someone has been advised they are obsolete and that there's no stock around, whereas someone says there is stock around.

Are you able to help at all?

[GTLEGEND]

Originally Posted by Mechan1k

G'day GTLEGEND

I picked up a FG XR6 centre interior light (twin light version).
Looking at replacing my FG XT standard small dome light.

Just wanted to know if there are any other brackets required for the larger unit .... of i just need my headlining trimmed (while I get the whole thing re-trimmed) and it just uses the rear pop-in mounts into the roof frame (and the front slide/plastic hooks?

Thought I'd ask before I embark on this small journey.

Here are the components of the front and rear lamps on an FG. There is also the front one with sunglass holder, but I assume that's not what your after. Let me know if that's not the case and I can add that in later.

Map light:

Attachment 105003

Here is the roof lining, see part 13879, thats the bracket the map light screws into.

FG Roof Lining.PNG

[Mechan1k]

Originally Posted by GTLEGEND

Here are the components of the front and rear lamps on an FG. There is also the front one with sunglass holder, but I assume that's not what your after. Let me know if that's not the case and I can add that in later.

Map light:

Attachment 105003

Here is the roof lining, see part 13879, thats the bracket the map light screws into.

Attachment 105004

Unfortunately that first attachment link wont open.

I recently bought the middle light
similar to this link

https://www.ebay.com.au/itm/25511022...QAAOSwghVhKDES

Already have the base FG front map lights without sunglasses holder in place.

[GTLEGEND]

Originally Posted by FoxtrotGolfXray 5.0

Hey GT, you might be able to resolve a discussion happening in the pub re genuine FG X XR8 floor mats. Someone has been advised they are obsolete and that there's no stock around, whereas someone says there is stock around.

Are you able to help at all?

So there is some differences out there.

First are we referring to just the one drivers side that comes standard, the pack of remaining 3 or a set of 4?

Secondly the drivers one alone changed on 13/4/2015, so FGX XR8 before or after this date, they are different?

[GTLEGEND]

Originally Posted by Mechan1k

Unfortunately that first attachment link wont open.

I recently bought the middle light
similar to this link

https://www.ebay.com.au/itm/25511022...QAAOSwghVhKDES

Already have the base FG front map lights without sunglasses holder in place.

Does the link work now?

FG Map Light.PNG

[FoxtrotGolfXray 5.0]

Originally Posted by GTLEGEND

So there is some differences out there.

First are we referring to just the one drivers side that comes standard, the pack of remaining 3 or a set of 4?

Secondly the drivers one alone changed on 13/4/2015, so FGX XR8 before or after this date, they are different?

Hmm, good points you've raised there, GT. And TBH, I'm not really sure as none of that detail was discussed.

Is it much hassle to find out the availability of all the permutations you've listed? I don't want to create work for you, but just thought an answer from someone reliable like yourself may have helped them out.

[Mechan1k]

Originally Posted by GTLEGEND

Does the link work now?

Attachment 105005

Yes it does ... thank you.

[coo]

Hi GT Legend.
Question please.

I'm after:

1.the volume control regulator for a Territory 2.7L Diesel (mounts onto the side of the HP fuel pump) sometimes known as the pressure control valve.

2. the fuel HP fuel pressure sensor.


Thanks Coo

the

[GTLEGEND]

Originally Posted by FoxtrotGolfXray 5.0

Hmm, good points you've raised there, GT. And TBH, I'm not really sure as none of that detail was discussed.

Is it much hassle to find out the availability of all the permutations you've listed? I don't want to create work for you, but just thought an answer from someone reliable like yourself may have helped them out.

There are no single drivers FGX mats left at all, pre or post the date given.

There are a handful left of the set of three, passenger front and two rears in dealer stock, but obsolete from Ford as such.

Set of four is totally obsolete from Ford and the dealers.

Hope this settles rather than create more dramas, lol.

GT

[GTLEGEND]

Originally Posted by coo

Hi GT Legend.
Question please.

I'm after:

1.the volume control regulator for a Territory 2.7L Diesel (mounts onto the side of the HP fuel pump) sometimes known as the pressure control valve.

2. the fuel HP fuel pressure sensor.


Thanks Coo

the

Hi Coo,

From what I can see the volume control reg/pressure control valve is not sold separate from Ford, you have to buy the whole pump. Whole pump is $2300 plus freight, see image below.

SZ HP Pump.PNG

Are you referring to the pressure sensor that sits on the end of the LH fuel rail tube? If so you can only buy that as part of the rail. $1600 plus freight. See image below:

SZ Fuel Injectors Rails.PNG

There may be aftermarket alternatives, but those are the genuine options.

GT

[coo]

Thanks. There are aftermarket options available. I'll go down that path.

[FoxtrotGolfXray 5.0]

Originally Posted by GTLEGEND

There are no single drivers FGX mats left at all, pre or post the date given.

There are a handful left of the set of three, passenger front and two rears in dealer stock, but obsolete from Ford as such.

Set of four is totally obsolete from Ford and the dealers.

Hope this settles rather than create more dramas, lol.

GT

Thanks GT. I see you've now responded in the thread too. I think I need to apologise for getting you involved!

[Mechan1k]

I know you were talking about the FGX mats.

But I am after just a base Falcon FG driver's mat. Pretty sure it has a Ford logo on it as well
I have worn a heal hole through mine.

My other 3 mats are like new though.

I know with my SZII Territory it looks like driver's mats changes to a slightly lighter colour now .... and accomodate the newer round pop-in retainer.

I'm more after the older style that take the plastic hook/lug ... and is "black"

Only if you can find one .... pretty please

[GTLEGEND]

Originally Posted by moey747

Thanks, are there any BA BF BOSS engine mounts around? not 100% on this p/n, but I dug up BAT6C060A and BAT6C010A?

Can get LH & RH mounts for BA/F Boss for $275 each side plus postage if required...

Let me know if you want them.

[prydey]

Hey GTLEGEND,

I'm after genuine fuel, oil and air filters for a SZ Territory diesel.



Cheers
Rob

[GTLEGEND]

Originally Posted by prydey

Hey GTLEGEND,

I'm after genuine fuel, oil and air filters for a SZ Territory diesel.



Cheers
Rob

Hi Rob,

Oil Filter: $30
Air Filter: $35
Fuel Filter: $120

Postage on top at a guess of $15-$20.

Happy to get for you of need be, all items are genuine Ford.

GT

[prydey]

Originally Posted by GTLEGEND

Hi Rob,

Oil Filter: $30
Air Filter: $35
Fuel Filter: $120

Postage on top at a guess of $15-$20.

Happy to get for you of need be, all items are genuine Ford.

GT

Thanks for the quote.

I found this kit on ebay from Bayford Ford
https://www.ebay.com.au/itm/SERVICE-...154756-20017-0

Seems good value based on your prices so I'll get that instead. Thanks.

[GTLEGEND]

Originally Posted by prydey

Thanks for the quote.

I found this kit on ebay from Bayford Ford
https://www.ebay.com.au/itm/SERVICE-...154756-20017-0

Seems good value based on your prices so I'll get that instead. Thanks.

Go for it, that is a good deal. Like I said in post 1, always check because some of the bigger dealers sell parts below cost in some cases.

[mad2]

Hi GTLEGEND.

just wondering if you could tell me what the part numbers apply to & yes i know they are no longer available.










two are door looms but i'm not sure which is left/right & not sure on the other.


Thanks

[GTLEGEND]

Originally Posted by mad2

Hi GTLEGEND.

just wondering if you could tell me what the part numbers apply to & yes i know they are no longer available.


image

image


image


two are door looms but i'm not sure which is left/right & not sure on the other.


Thanks

Hey mate,

The 3R23 14632 AD is the RHR door loom.

The 3R23 14633 AB is the LHR door loom.

The 3R73 13B711 BE is interior roof lamp wiring.

Hope that helps..

[mad2]

Originally Posted by GTLEGEND

Hey mate,

The 3R23 14632 AD is the RHR door loom.

The 3R23 14633 AB is the LHR door loom.

The 3R73 13B711 BE is interior roof lamp wiring.

Hope that helps..

yes that does a lot. Thank You very muchly

[290GTP]

Hey mate, just after a price for a BA Boss 290 overflow tank.

Cheers

[GTLEGEND]

Originally Posted by 290GTP

Hey mate, just after a price for a BA Boss 290 overflow tank.

Cheers

Coolant recovery tank for 32V V8 is $75 plus postage if required.

[290GTP]

Thanks for that. Does that include that cap or is that extra?

[PRO-GT]

Hi GT,

After a bf zf auto shifter pad replacement?

The part in the shift that says P R N D is worn on mine and was wondering if its a replacement part or a whole new shifter is needed?

Thanks!


Sent from my iPhone using Tapatalk

[GTLEGEND]

Originally Posted by 290GTP

Thanks for that. Does that include that cap or is that extra?

Not sure will have to confirm on Monday and get back to you. If it does not the cap is an additional $35.

[GTLEGEND]

Originally Posted by PRO-GT

Hi GT,

After a bf zf auto shifter pad replacement?

The part in the shift that says P R N D is worn on mine and was wondering if its a replacement part or a whole new shifter is needed?

Thanks!


Sent from my iPhone using Tapatalk

Hi mate, below are the shift components. As you can see the gear housing with PRND was available but is now obsolete.

As with the whole shift assembly, you would need to be more specific as there are around 20 different combinations/trim colours etc, most are obsolete.

BF 6 Speed Shifter.PNG

[aussiblue]

So the screen in my November 2013 FG MK II XR6 is dying at only 70,000 km (see https://fordforums.com.au/showthread.php?t=11491816 for more) I doubt if I can expect any support from Ford 8 years on, so what's the price and availability of a new one (I will sit down in expectation of price sticker shock).

[GTLEGEND]

Originally Posted by aussiblue

So the screen in my November 2013 FG MK II XR6 is dying at only 70,000 km (see https://fordforums.com.au/showthread.php?t=11491816 for more) I doubt if I can expect any support from Ford 8 years on, so what's the price and availability of a new one (I will sit down in expectation of price sticker shock).

I very much doubt there would be any Ford assistance at that age. The screens were around $1100 but I think they are obsolete now. It would also depend if you have or do not have factory Nav.

Speak to Fadi from ASL Automedia on here, they may be able to repair it for you?