|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
The Pub For General Automotive Related Talk |
|
Thread Tools | Display Modes |
30-12-2008, 10:29 PM | #31 | ||
FF.Com.Au Hardcore
Join Date: Apr 2008
Posts: 514
|
The clevo (4v) was good in the xw, xy and first xa's. They didn't have the low down torque of the same sized windsors(ports so big), but they revved harder (advantage of big ports). They were a lot heavier than the windsor. The HO engines rate pretty well but most aussie cast 351's were a bit weak as they were strangled by ADR's and emmissions.
Barring the HO engines, I would rate the windsor as the better street engine. Torquier down low, more economical. As a race engine - the clevo breathed better and revved harder. As such, I think for the clevo to rate as a top engine we must specify which variation. 1). The phase 3 - torquier than a phase two, more reliable 2). Phase 2 - awesome rush as that cam came on song - needed a rev limiter! 3). xw/xy gt - 300hp, 520nm (gross figures) - low fifteens all day on crap tyres with two passengers on board. Interesting to note that holden never produced a 350 powered car that matched a stock xw/xy gt (let alone a HO variant) in a straight line. How good was the phase 4? I've never driven one. May have been the best clevo of them all. I think the stock 340 v8 fitted to some valiants was a better engine than a non-HO stock 351 clevo. a bit controversial perhaps, but we often think of moff's xc or dick's tru blue xd when we think of clevo's but if you have ever owned a standard xc or xd with a 351 you would be disappointed. If you have ever driven an xy phase 3, you would be surprised that FORD AUS could produce such a thinly veiled race car. AWESOME! Same applies to hemi, e38, 49, FG F6 |
||
30-12-2008, 11:22 PM | #32 | ||
.
Join Date: Mar 2006
Location: Brisbane
Posts: 6,197
|
I6T - BFYB & 1/4 smasher by a mile..... followed by a healthy... no, angry 265.
Holden reds are noteworthy too, hearing one at 7000rpm screaming down the front straight at Oran Park is one of those little suprises I enjoyed. Driving it was another... |
||
30-12-2008, 11:35 PM | #33 | |||
Regular Member
Join Date: Nov 2008
Posts: 354
|
Quote:
In the end though, what motor keeps on coming back for more and is know a Major part in Aussie performance cars...The I6, i mean imagine a twin turboed version so you could have a small turbo spool for low end power and then a larger one once you get into the rev range, it would be a lethal combo! the V8's are great, but the I6 is really starting to stick it to em... |
|||
30-12-2008, 11:42 PM | #34 | ||
GT
Join Date: Apr 2005
Location: SYDNEY
Posts: 9,205
|
this one is easy .
IT'S THE NA I6 REFINED OVER 30 YEARS AND STILL IN VEHICLES TODAY . TODAYS VERSION HAS 195 KW'S NVH LEVELS EXTRTEMELY LOW . AND THE ECONOMY OF A 4CYL ENGINE . WITH 600 000KMS ACHEIVABLE WITH EASE . FARC THE REST I KNOW THE TRUTH ^^^^^^^^^^^^^^^^^^^^ |
||
31-12-2008, 12:00 AM | #35 | ||
FF.Com.Au Hardcore
Join Date: Apr 2007
Location: Miranda, NSW
Posts: 6,771
|
The Chrysler Hemi 265 in E37 config
__________________
2005 BA MK2 FPV GT - 6 SPEED MANUAL , SILHOUETTE, SWISSVAX, SUNROOF, BILSTEIN AND LOVELLS, FACTORY GENUINE 19'S, X-FORCE STAINLESS QUAD CATBACK, ADVANCE HEADERS, 200 CPSI CATS, BLUEPOWER CAI, HERROD BREATHER KIT, 4:11 DIFF RATIO, MAL WOOD OPT 3+ CLUTCH, BILLET SHIFTER, MELLINGS 10227, NOW WITH REVERSE CAMERA/SENSORS, ALPINE SPEAKERS & SUB - CUSTOM TUNED TO 275 RWKW NOW WITH A NEW ADDITION - 2017 MUSTANG V8 GT FASTBACK - , 6 SPEED AUTO IN PLATINUM WHITE, |
||
31-12-2008, 12:14 AM | #36 | ||
Force Fed Fords
Join Date: Nov 2005
Location: Victoria
Posts: 5,556
|
Hands down winner Turbo 4.0 L I6!
__________________
2021 Focus ST-3 Mountune Enhanced |
||
31-12-2008, 12:30 AM | #37 | |||
Professional Mouse Jockey
Join Date: Nov 2005
Location: SE Vic
Posts: 3,185
|
Quote:
I would also probably say the latest iteration of the turbo I6 is the best overall followed by the LS3 (thats the latest one isnt it?) and the best old school would probably be the Hemi 265.
__________________
Isuzu MUX for towing horses - currently no Fords in the stable Time flies like an arrow; fruit flies like a banana. Groucho Marx
|
|||
31-12-2008, 12:34 AM | #38 | ||
BF XR6, oh yeah!!
Join Date: Sep 2007
Location: Melton, Vic
Posts: 1,015
|
Hang on this is a question that actually had to be asked?
Falcon I6 by a long shot, yeah sure a 351 clevo is a great engine, but how thirsty is it, yeah sure a Hemi 6 is a great engine too, but how often do you have to tune it to keep it that good? would any of the other engines be able to make as much power and torque as the I6 and average 10.1L per 100Km while lugging around over 1700kgs. Not to mention the fact that they can do this for nearly a million Kms without a rebuild and I could go on and on, but I don't need to, you all know this anyway.
__________________
Current ride: 2005 BF XR6 Sedan, Lightning Strike, ZF Auto Previous ride: 2001 AUII Futura Sedan, Narooma Blue |
||
31-12-2008, 12:35 AM | #39 | ||
Regular Member
Join Date: Sep 2007
Posts: 242
|
351 cleveland,turned the Australian car market on it's head, when it was released. And there's a bloke on the network 54 cleveland forum(winkmiester) who leaves the line at 8800 rpm and shifts gears at 9000 rpm, factory crank, rods,heads,manifold and autolite carby
|
||
31-12-2008, 12:52 AM | #40 | ||
Regular Member
Join Date: Sep 2007
Posts: 242
|
Hemi 6 is a good strong motor as long as you dont want to rev it over 5000-5500, then you will have oil pump dramas.As for the I6 doing a million kms without a rebuild, how many heads to do a million kms ?
And can someone tell me with the GM LS series of engines , if you do cook it, and it does blow a head gasket, will you possibly have a warped deck face as well as a warped head face, that will need skimming |
||
31-12-2008, 09:15 AM | #41 | ||
Trev
Join Date: Apr 2006
Location: Was Perth, now country Vic
Posts: 8,017
|
The E49 Charger engine was without doubt a mighty donk. I once covered 800 miles in a weekend in on one which included winding country roads with 'spirited' driving followed by drags at a country airstrip, a motorkhana competition, a navigational rally then the drive home again and over the whole duration, competition included, the car averaged 15.2mpg.
As for tuning. I never had to touch the Webers on my car. The fallacy about them all going out of tune all the time is just that. The people with those dramas did not have the original Weber set-up that was developed especially for the RT's after over 11,000 miles of testing around Italy. They have a mismash of stuff from other cars mocked up to look like the originals. The intake roar was huge, especially from the passenger side. As for revving them, this engine was all about big torque, it would pull top gear from 1000rpm without a grumble or snatch. I never even dreamed of owning a Hemi six, I was a V8 man through and through, then I drove one.... Next day I went down to the see the bank manager and bought one. I have had stroked V8s and still have one, many Mopar V8s, a couple of 351s, and still have an F6. And I can tell you hands down for an overall driving experience nothing comes close to the visceral pleasure of punting an E49 in anger. Funnily enough the original owner of my E49 Charger had traded a Phase Three HO in to buy it. A doctor from Kalgoorlie no less, I bet his house calls were the quickest in the land, lol. He also reflects on the E49 as the best drive.
__________________
Trev (FPV FG II GT-E thus the fully loaded burger with the lot as standard +Alpine/Dynamat fitout - 2 of only 4 ever made GT-E factory 9" rear rims - Michelin Pilot Supersports - Shockworks Suspension) |
||
31-12-2008, 09:33 AM | #42 | ||
Broken
Join Date: Dec 2005
Posts: 7,845
|
Long live the I6T, I believe they are a great engine.
If I had the $$$$$, I would have an FPV 6 as well as the GT, but because I could only afford one of them - it is the BOSS. Still makes me laugh that the yanks back in early 2000 said that those Aussies would not be able to get the truck block to work with the quad cam heads. Hahaha, we well and truely proved them wrong. Their arrogance still amases me often - they could learn so much from their 'poor' Southern cousins..... Here's a thought - now that the I6 is here beyond 2010 - stick the f6 engine in a 'povo' pac Mustang, instaed of that V6. The thing would be an instant performance bargain. They'd love it if you could get them to actually try it.
__________________
The Scud GT 11.4 @ 128, 1.88 60ft. |
||
31-12-2008, 10:37 AM | #43 | |||
re
Join Date: Oct 2005
Location: Victoria - where being slow & incompetent is considered being "safe"
Posts: 1,323
|
Quote:
It's always hard to evaluate old engines when placed in a modern context but all of the usual suspects have already been covered. Hemis, Windsors, Clevos, 202's, etc. I'd like the modern I6T better if it was happier at high revs and was more linear with it's throttle response.
__________________
Scuderia Rev: Otto the tow pig - 2007 3.0 litre Coupé, vernünftig schnelle aber kein peilstab, Bathurst 2007 und 2010 zwölf Stunde Gewinner Jaffa the angry ant - mid 70's Honda 市民の, 73 と立方インチ LSD Elle "the body" shell - early 70's Datsun フェアレディ coupe. いい体は彼女の内側、内側と土台を待つ Last edited by Rev28K; 31-12-2008 at 10:50 AM. |
|||
31-12-2008, 11:25 AM | #44 | ||
Hoon On The Rise
Join Date: Mar 2005
Location: Open Roads with Boost!
Posts: 9,924
|
There is one interesting reflection in this thread. The level of acceptance and praise for the I6T.
4 years ago everyone bagged it and the Turbo vs V8 thing was rife but looking through here and seeing some of the players that were around in those days, it's in interesting reflection on the comments now placed here. I for one am with Tex, that motor in a Muzzy would be a weapon, let FPV have the Muzzy and Falcon variants with the F6 motor and watch it fly. With confidence Nice thought and arguably crystal ball stuff but a sweet thought none the less. Long live the I6/T and may it's boosted bliss path it's way to U.S. mainstream. I believe the engine can easily surpass M3 / E63 levels of performance. Recent motor comments indicate it has the driveline, just not the chassis. To compare a 65k F6 with 150k prize Euros is legendary in itself. Best engine in Aus would have to be I6/T, no other motor will do 1 million kms effortlessly without having the rocker cover off. No other motor unopned with bolt ons will crack 10s and no other motor would ever push such envelopes and boundaries when pegged against conventional performance. I fail to see any other engine that would reduce grown men to tears of joy.
__________________
Stomp 'n' Steer FGX-XR8 Manual, BFII E-Gas, '11 GSXR 1000 - Love 'em!
FPV Tickford Club of NSW - www.fpvclub.com |
||
31-12-2008, 11:38 AM | #45 | |||
Banned
Join Date: Dec 2007
Location: Karratha,W.A
Posts: 337
|
Quote:
|
|||
31-12-2008, 12:48 PM | #46 | |||
IWCMOGTVM Club Supporter
Join Date: Sep 2005
Location: Northern Suburbs Melbourne
Posts: 17,799
|
Quote:
I thought this thread was about modern motors. So for old school the Hemi 265 is also on my list.
__________________
Daniel |
|||
31-12-2008, 12:49 PM | #47 | ||
Render unto Caesar
Join Date: Feb 2008
Location: ::1
Posts: 4,228
|
The Hemi 6, the Falcon I6T (in FG form) and the RB30 engine offered in the VL.
|
||
31-12-2008, 12:50 PM | #48 | ||
Peter Car
Join Date: Dec 2004
Location: geelong
Posts: 23,145
|
I6 Turbo hands down, without a doubt. No other engine can match its economy, which can get well down into single figures during a cruise, its cheap power upgrade potential, its smoothness, bang for your buck, and the fact that in FG F6 form its the quickest Australian car you can buy, I still don't think any W427 has run faster than a 12.6 stock.
They are tough as nails too, how many engines can run 10's with standard internals, including valve springs. LS engines can't. |
||
31-12-2008, 12:55 PM | #49 | ||
FF.Com.Au Hardcore
Join Date: Apr 2007
Location: Kerang VIC
Posts: 1,212
|
Easy choice, Starfire 4cyl esp when fitted to a VB Commodore.
|
||
31-12-2008, 01:01 PM | #50 | |||
FF.Com.Au Hardcore
Join Date: Feb 2007
Posts: 584
|
Quote:
on topic. for a 6, the I6T is king, V8 it has to be the LS1,2,3 and L98 family |
|||
31-12-2008, 01:02 PM | #51 | |||
Donating Member
Join Date: Jan 2005
Location: Morayfield
Posts: 28,146
|
Quote:
I think the point that was being made was that the Hemi 6 doesn't really have "proper" hemispherical chambers. |
|||
31-12-2008, 01:11 PM | #52 | ||
Performance moderator
Join Date: Feb 2005
Location: St Clair..N.S.W
Posts: 14,875
|
The SS is all lag !!!
__________________
Real cars are not driven by front wheels,real cars lift them!!... BABYS ARE BOTTLE FED, REAL MEN GET BLOWN. Don't be afraid to try something new. Remember, amateurs built the Ark...Professionals built the Titanic! Dart 330ci block turbo black pearl EBXR8 482 rwkw.. Daily driver GTE FG.. Projects http://www.fordforums.com.au/showthread.php?t=107711 http://www.fordforums.com.au/showthr...8+turbo&page=4 |
||
31-12-2008, 01:13 PM | #53 | ||
FF.Com.Au Hardcore
Join Date: Sep 2005
Posts: 1,848
|
The 265 if we weight the results by year - it was sooo far ahead of the game.
But by the same token would we need to include the P76 alloy 4.4 v8 ? |
||
31-12-2008, 01:16 PM | #54 | ||
Regular Member
Join Date: Oct 2006
Posts: 258
|
Im going to say the 202 or the xu1 vertion to be exact that thing would pull my vb from 4th gear like it was a feather and sounded like a monster doing it.
but then there the hemi six it was great in stock form but there wasn't much power left to get out of it mabey 350hp max the old mans EH was quicker he know this becouse he was working a HM at the time of the HO's XU-1 and RT charger. |
||
31-12-2008, 01:22 PM | #55 | |||
FF.Com.Au Hardcore
Join Date: Jan 2005
Posts: 14,654
|
Quote:
Yeah.. miles ahead of the 351C or 308... : Hell, even the 202 was a more successful engine....
__________________
335 S/C GT: The new KING of Australian made performance cars.. |
|||
31-12-2008, 01:22 PM | #56 | ||
Trev
Join Date: Apr 2006
Location: Was Perth, now country Vic
Posts: 8,017
|
Oh my god, I have never read such crap mr Escort Driver. XU1s struggled to high 15s and in most tests could only manage 16s. Holden never made anything in the 60s or 70s that managed a 14 second quarter and all the models that Holden lovers crap on about struggled to mid 15s at best, even A9Xs couldn't crack a 14 downhill with a tailwind.
Not much left to get out of a hemi eh... There was one in Perth for years that ran low 11s.
__________________
Trev (FPV FG II GT-E thus the fully loaded burger with the lot as standard +Alpine/Dynamat fitout - 2 of only 4 ever made GT-E factory 9" rear rims - Michelin Pilot Supersports - Shockworks Suspension) |
||
31-12-2008, 01:24 PM | #57 | |||
Trev
Join Date: Apr 2006
Location: Was Perth, now country Vic
Posts: 8,017
|
Quote:
__________________
Trev (FPV FG II GT-E thus the fully loaded burger with the lot as standard +Alpine/Dynamat fitout - 2 of only 4 ever made GT-E factory 9" rear rims - Michelin Pilot Supersports - Shockworks Suspension) |
|||
31-12-2008, 01:24 PM | #58 | |||
Performance moderator
Join Date: Feb 2005
Location: St Clair..N.S.W
Posts: 14,875
|
Quote:
Was so tall thay laid it over to fit .. The little boxer flat four EJ20 / 25 from Subaru, The SR20 from Nissan and lets not forget the Evo engines from Mitsi..Then the 2JGTET from Toyota, 1UZ from Lexus [Toyota].. The 2J is the engine doing quick times at present and in std form go o/k in Supra's... yea I must say the Starfire takes some beating!! To think Toyota fitted these into their cars.. So they MUST be good!! hahaha About as good as the P76 6 cylinder.."Lucky" we didn't get the Tasman and Kimberly here...
__________________
Real cars are not driven by front wheels,real cars lift them!!... BABYS ARE BOTTLE FED, REAL MEN GET BLOWN. Don't be afraid to try something new. Remember, amateurs built the Ark...Professionals built the Titanic! Dart 330ci block turbo black pearl EBXR8 482 rwkw.. Daily driver GTE FG.. Projects http://www.fordforums.com.au/showthread.php?t=107711 http://www.fordforums.com.au/showthr...8+turbo&page=4 |
|||
31-12-2008, 01:28 PM | #59 | |||
FF.Com.Au Hardcore
Join Date: Jan 2005
Posts: 14,654
|
Quote:
What about the 3 years prior in Australia on all our own bigger tracks? Dozens of races over many years.. nada, zilch... Face it, the thing never won any title here,where car manufacturers cared, WHERE IT COUNTS, it was only around a few years so in my mind its just another "could have would have NEVER DID"...........
__________________
335 S/C GT: The new KING of Australian made performance cars.. |
|||
31-12-2008, 01:29 PM | #60 | ||
Regular Member
Join Date: Oct 2006
Posts: 258
|
the xu-1 may have never ran quick time but it it won bathurst the hemi six never did
as for this 11 second hemi what was done to it to get it to run 11s |
||