Welcome to New Members - Post here to say gday! - Page 201

Golde · 12-07-2020, 02:53 PM

Hi Guy's, first time user here,so just a quick hello to all, getting ZH Fairlane back on the road after a long time, so I'm sure to have some questions.
Regards

MadHatter87 · 13-07-2020, 10:27 PM

Hi to all,
New member/poster here saying hi and introducing myself. Would also like to apologise to the mods for posting in sales without reading first. Have joined for multiple reasons mainly because I've worked on cars from a young age and currently am in ownership of an EF and an EL. Current residing area is Melb. region so I try and keep an eye out for car shows and meets.
Happy to meet you all.

nedster · 14-07-2020, 12:51 AM

hi all.. ya got mick here.. new to the site and hopefully find some answers about my AU11 ute

Auburn460 · 14-07-2020, 08:33 AM

Thank you for adding me to this forum. I have a stock 1968, 460 big block working through a C6 transmission to a 9 inch 2.75 ratio diff in my Auburn Boat Tail Speedster. Looking forward to tips on maintenance and tuning.

xb74_black · 14-07-2020, 07:05 PM

Hello all, a former xfalcon forum member returning to forums from facebook. Now own a Territory AWD and still have the XF Van with a 351w, and a few other cars tucked away in the garage.

Raafie57 · 15-07-2020, 08:03 AM

Hi everybody. Nickname is Raafie. I own a 97 xh ex cop panelvan. Auto bucket seat lsd 6pot. Hoping to put a Barra in it if it will clear bonnet. Any help greatly recieved. Cheers. Perth WA.

Krgracing · 15-07-2020, 02:59 PM

Picked up a 1970 cortina mk2 L I’m trying to find out what the vin and engine numbers mean and chase up if it left the factory with these in it. It’s dressup up as a gt tribute car. Planning on a full Resto as a tribute car

Mummyang · 19-07-2020, 08:48 AM

Hi. I'm Angie and have a 2010 Ford Ranger.

DanTheMan9 · 23-07-2020, 08:10 AM

G'Day Guys,

Finally got my PC up and running again since joining back in march lol.

Daily drive is an FG MK2 NA-XR6 LE

Cheers for settin up a bloody good forum, looks like plenty of knowledge and experience on here.

paulharris · 23-07-2020, 10:18 AM

G'day everyone, I'm in Yallingup Western Australia and I drive a 2019 Ford Ranger Wildtrack Bi-Turbo Auto.

f.fed73 · 23-07-2020, 11:08 AM

Hello guys, been a member for years but haven't been active in quite a while. After a search spanning at least 15 years I finally found a white xf silver anniversary, and more importantly, was in a position to be able to buy it. I remember going to the ford dealership as a wide eyed 12 year old with my dad to pick the very same car up. With dad and his car both being long gone, it's been a dream of mine to own one. Anyway, it's in line for a full Resto which I will keep you posted on on the relevant section.

Cheers

Sent from my CPH1831 using Tapatalk

embro · 24-07-2020, 11:48 AM

Hi everyone mark here Helping out the young son with a BA can Comms fault with no much money goin around time for the old fox to get his hands dirty again looks like a great place to find answer amazing actually

JohnnyBoy53 · 24-07-2020, 11:55 AM

Hi, I'm John from Romsey VIC.

I worked for Ford UK for 30 years before taking an early retirement in 2004. Moved to Aus three years ago and bought a 2012 Territory SZ Titanium AWD Diesel, which is starting to be a pain - so hopefully this forum can help me out.

I was OK in the days when you only needed fuel and a spark and the car would run eventually!!!

San_Tehnik · 24-07-2020, 05:14 PM

Hi Guys,
I'm Alex& I'm from Ukraine but i live in THailand. I'm thinking to buy Ford Everest. That's why i come to this forum.
And yes... sorry for my English

tez57 · 25-07-2020, 10:44 PM

thanks for the intro name is Terry and have territory sz diesel first time on this forum am aiming to find a way of adapting recent model double din Kenwood stereo to my car but after research find that the screen and dvd are separate and attached to a circuit board not easily detached to allow for aftermarket audio.
if there is anyone out there that has successfully fitted after market audio to Territory 2011-2016 SZ model please would be most grateful for info
cheers
Terry

Pajorgo · 26-07-2020, 01:15 PM

Hi, my name is Robert I have a 2018 Ranger PX 11. I would like to replace the original headlight bulbs with LED ones. I have been told by my local Ford Dealer that I will eventuality have computer problems. I would then have to take it back to them to unlock the computer. I was wondering if any other Ranger owners have done this and did they have any problems. Or how did you improve the poor headlight problems.

hitone57 · 27-07-2020, 02:59 PM

Hi everyone..My name is Tony. Have owned a few Fords over the years. ZB fairlane,1999 Ghia, 2001 Ford Au2 SR for 10 years and have now decided on Ford Territory Ghia SY MK2 2010 model..bought at reasonable price with Roady ( Bushes etc all done) but need some cosmetic things done to it..I will be chasing ideas to fix hinge on the top dash lid, rear console bin lid hinge, Is it normal for the catalytic converter to leak water occasionally and as well the upgrading of the ICC unit for an after market unit...
Cheers Tony

David R Goard · 27-07-2020, 03:03 PM

Hi . I have a Ford Territory sz rear wd. Getting alot of noise from the rear end a slit thumbing at low speeds & louder wine at higher speeds like on the left side & when towing heavy loads a real bad vibration on acceleration. Trying to work out whether it is the wheel bearing, cv or the diff.

Dyna FXD · 27-07-2020, 03:57 PM

Welcome and you will find the people here have a ton of info.
Enjoy

Philld83 · 27-07-2020, 08:28 PM

Hey guys I’m new to the ford seen I have just brought my son his first car it’s a 1998 Ford Festiva 3 I’m looking if someone has a workshop manual for this car and could you please tell me if the rear wheel bearings needs to pressed in ? Any help would be good I have searched everywhere for the info and workshop manual and can’t find anything anywhere

**GasoLane** · 27-07-2020, 08:47 PM

Quote:

Originally Posted by Philld83

Hey guys I’m new to the ford seen I have just brought my son his first car it’s a 1998 Ford Festiva 3 I’m looking if someone has a workshop manual for this car and could you please tell me if the rear wheel bearings needs to pressed in ? Any help would be good I have searched everywhere for the info and workshop manual and can’t find anything anywhere

Welcome to AFF Phil, try asking in the Festiva area..........

https://www.fordforums.com.au/forumdisplay.php?f=78

Philld83 · 27-07-2020, 09:00 PM

Quote:

Originally Posted by GasoLane

Welcome to AFF Phil, try asking in the Festiva area..........

https://www.fordforums.com.au/forumdisplay.php?f=78

Thanks for that advice

Frazz · 28-07-2020, 11:24 AM

Hi Guy's im new to the forum, i thought its about time i pulled my finger out and make a start on the old Falcon XP. I did have a windsor 289 that i pulled out of it for a rebuild, but it was pinched from storage many years ago and now im on the hunt for a replacement with box. Im not much of a tech head so im hoping this forum will help me on this journey to the dream of a Cherry Black with updated mods Falcon XP

Eddie · 28-07-2020, 12:52 PM

Hi i`m eddie i got an old ford f100 and im doing it up to its original glory i am not building a performance car just a farm ute on a tight budget Do ford tractors count as well?

Igoe · 28-07-2020, 01:53 PM

G'day, I'm Ian.

Been a Ford fan and owned several over the years. Funny, I grew up a Holden man, but since I bought my first Ford (XF), I've been converted.

Decided it's time to join up here.

Currently got a 2012 Territory, one of the best cars we've ever owned.
Picking up a 2015 Ranger this week.

Mick Riddett · 29-07-2020, 04:22 PM

Gidday,just joined up.
Love my Fords and always have. My current driver is a BA XR8 ex police car. Just got my build sheet from Ford and would like any info you guys can help me with.
Thanks

FGXXR6TUTE · 30-07-2020, 10:13 PM

Hi All,

Joined recently, as heaps of my Google searches would link to posts by users of this forum.

Last 2 cars have been BF MKII XR6 Sedan, FG MK1 XR6 Turbo ute and current ride is an FGX XR6 Turbo ute.

Starting to do some performance mods to my XR6, as I will be holding onto it for some time now.

Dyna FXD · 31-07-2020, 02:02 AM

Welcome 🙏

scroter · 31-07-2020, 07:32 AM

Hi all.
Joined to get access to technical docs, proved useful already.

Getting the old XY Fairmont going again, poor old girl was parked up while university, marriage, kids happened.

It's teal glow with saddle interior, factory 302w C4, and was running original block with alloy top end around 3 yrs ago. Bit oily, so just had block bored and replacing suspension bushes, springs etc now before putting it back together.

Look fwd to summer cruising and car shows with family.
Also have had XA sedan, HQ ute and XF mont, plus a few old bikes still in the shed..

Located in Southern NZ so should be some good photo opportunities when all going.

Doc05 · 05-08-2020, 07:38 PM

G,day everyone, thankyou for welcoming me to your community!