Genuine Ford Parts - Page 37

GTLEGEND · 17-11-2022, 10:53 PM

For Citroenbender:

6 Cylinder

BA Steering Cooler 6.PNG

V8

BA Steering Cooler V8.PNG

Citroënbender · 20-11-2022, 11:06 AM

Thanks - it’s confirmed the V8 coolers are totally not compatible with my scheming.

Another - unrelated - question.

Is there a part number or technical order description for a retail customer to request the key cutting code for a B-series Falcon? Assuming that Ford sell this information when the customer has rego papers and identification.

Bush Chook · 20-11-2022, 04:13 PM

For GTLegend
I am wondering if you know the part number of the plastic cover for the lock rod on a BA Falcon.
And are they still available?
Have attached a picture of the part.
Thanks in advance.

**GasoLane** · 20-11-2022, 05:43 PM

Quote:

Originally Posted by Bush Chook

For GTLegend
I am wondering if you know the part number of the plastic cover for the lock rod on a BA Falcon.
And are they still available?
Have attached a picture of the part.
Thanks in advance.

Try postimage for posting pics.

https://postimages.org

Bush Chook · 20-11-2022, 05:55 PM

Sorry guys.
Obviously did not work from my phone.

Bush Chook · 20-11-2022, 05:56 PM

Still a newby at this forum.
Have attached it on The Pub Chat.
Any help would be appreciated.

**GasoLane** · 20-11-2022, 06:35 PM

Quote:

Originally Posted by Bush Chook

Still a newby at this forum.
Have attached it on The Pub Chat.
Any help would be appreciated.

I've enlarged it a bit so it may help.

GTLEGEND · 20-11-2022, 11:14 PM

Quote:

Originally Posted by Citroënbender

Thanks - it’s confirmed the V8 coolers are totally not compatible with my scheming.

Another - unrelated - question.

Is there a part number or technical order description for a retail customer to request the key cutting code for a B-series Falcon? Assuming that Ford sell this information when the customer has rego papers and identification.

Customer can call 13FORD and seek the key code. if you PM me a VIN I will see if my contact can get (no promises).

Citroënbender · 20-11-2022, 11:20 PM

Thanks - it’s this guy here, who lost his last key: https://www.fordforums.com.au/showthread.php?t=11496178

I tell people to take a photo of the blade and email it to themselves, then it’s forever recorded.

GTLEGEND · 21-11-2022, 10:43 AM

Quote:

Originally Posted by Bush Chook

For GTLegend
I am wondering if you know the part number of the plastic cover for the lock rod on a BA Falcon.
And are they still available?
Have attached a picture of the part.
Thanks in advance.

Do you mean the snipper knob or the surround?

The knob itself has two different styles possible:

Aluminum Finish: BAF21830A1 Can source one if need be.
Chrome Finish: BF2F21830A Can also source if need be.

The surround is part of the door trim and was never sold separately from Ford.

Bush Chook · 21-11-2022, 11:23 AM

Thanks GT.
Was the surround I was chasing.
Maybe have to check a wreckers somewhere.
Thanks for your help.

TasRanger · 29-11-2022, 07:11 PM

Hi GTLEGEND

How much for a right hand lower control arm for a 2012 PX Ranger 4wd? The ball joint and bushes are shot.

Many thanks.

GTLEGEND · 29-11-2022, 09:02 PM

Quote:

Originally Posted by TasRanger

Hi GTLEGEND

How much for a right hand lower control arm for a 2012 PX Ranger 4wd? The ball joint and bushes are shot.

Many thanks.

Hi TasRanger,

$380 plus postage freight which I have no idea how much that would be at this point.

GT

TasRanger · 30-11-2022, 08:26 AM

Quote:

Originally Posted by GTLEGEND

Hi TasRanger,

$380 plus postage freight which I have no idea how much that would be at this point.

GT

Thank you! I'll send you a PM.

Rexbunta · 01-12-2022, 08:52 PM

Hi GT,

Price and availability on a FGX G6ET centre console trim ( gloss ) and also the chrome garnish on the rear boot external that sits between the rear lights.

Thanks heaps!

GTLEGEND · 01-12-2022, 10:39 PM

Quote:

Originally Posted by Rexbunta

Hi GT,

Price and availability on a FGX G6ET centre console trim ( gloss ) and also the chrome garnish on the rear boot external that sits between the rear lights.

Thanks heaps!

Hi Rexbunta,

You need to be a bit more specific on the console trim, see image below and let me know exactly which part you are after.

As for chrome garnish trim, they are $250 plus postage.

FGX Console.PNG

Hope that helps..

GT

Rexbunta · 02-12-2022, 06:18 AM

Quote:

Originally Posted by GTLEGEND

Hi Rexbunta,

You need to be a bit more specific on the console trim, see image below and let me know exactly which part you are after.

As for chrome garnish trim, they are $250 plus postage.

Attachment 105988

Hope that helps..

GT

Thanks for the reply according to the diagram i can’t see a part number directly but it holds the cigarette lighter and goes around the gear selector and uses the HC1 clips, believe it comes Matt grey in the xr6t and in the g6et gloss grey which is what I’m after.

Thanks.

GTLEGEND · 02-12-2022, 06:43 AM

Quote:

Originally Posted by Rexbunta

Thanks for the reply according to the diagram i can’t see a part number directly but it holds the cigarette lighter and goes around the gear selector and uses the HC1 clips, believe it comes Matt grey in the xr6t and in the g6et gloss grey which is what I’m after.

Thanks.

So that would be the one with the red dots meaning all those parts with dots come together. Unfortunately, that part is obsolete, there may be one or two laying around that I would need to chase and get back to you on.

Leave it with me and I will see what I can find out.

GT

GTLEGEND · 03-12-2022, 09:45 PM

For Crypto:

FG Ute Door Top Moulds.PNG

GreenGully · 08-12-2022, 11:57 AM

Hi, Probably asking the impossible, but, I'm looking for a Tub liner for XH falcon Ute that's in good condition

GTLEGEND · 08-12-2022, 01:42 PM

Quote:

Originally Posted by GreenGully

Hi, Probably asking the impossible, but, I'm looking for a Tub liner for XH falcon Ute that's in good condition

Good luck, they were never standard fitment on XH as it was not until AU that they had a plastic bed liner in lieu of a normal floor. They were an accessory fit and had a part number of XGP00037A and so harder to find.

Try the below:

Ford Pro Spares in Smithfield NSW

Mr Ford in Greenacre NSW

Fairford Spares in Padstow NSW.

Happy hunting.

GreenGully · 08-12-2022, 01:51 PM

Quote:

Originally Posted by GTLEGEND

Good luck, they were never standard fitment on XH as it was not until AU that they had a plastic bed liner in lieu of a normal floor. They were an accessory fit and had a part number of XGP00037A and so harder to find.

Thanks yeah that's what I was fearing, the one I have in it now looks like it was retrofitted, but it's condition is terrible so I was hoping to find something in better nick, thanks anyway.

GTLEGEND · 08-12-2022, 02:15 PM

Quote:

Originally Posted by GreenGully

Thanks yeah that's what I was fearing, the one I have in it now looks like it was retrofitted, but it's condition is terrible so I was hoping to find something in better nick, thanks anyway.

https://www.ebay.com.au/itm/281640654177

gassa · 08-12-2022, 07:26 PM

Quote:

Originally Posted by GreenGully

Thanks yeah that's what I was fearing, the one I have in it now looks like it was retrofitted, but it's condition is terrible so I was hoping to find something in better nick, thanks anyway.

Correct you there, XH2 had bedliner standard. it was a cost saving, we didnt fit side plates and floor area was undercoat only. bedliners were made by a plastic company in Campbellfield

Gassa

**mad2** · 10-12-2022, 08:04 PM

Evening Legend .....

just wondering if you could give me a 'clue' regarding 17A413 on a SX or SY as i'm kinda lost figuring out what that C-75 plug is for.

Many Thanks

T3rminator · 10-12-2022, 09:05 PM

Hey GT Legend,

Can you please advise if Ford still sell these COP pig tails or adaptors? These are from a 2004 Ford Falcon 5.4L 3v (Barra 220). If so, whats the part number and price? Thanks.

bondy99 · 10-12-2022, 10:06 PM

GTLEGEND,

I have a year 2000 AU2 6cyl.

The material thats affixed under the bonnet is now deteriorating.

Does Ford still have that pre-shaped material and the large clips, I think there are 12 clips from memory

GTLEGEND · 10-12-2022, 10:33 PM

Quote:

Originally Posted by mad2

Evening Legend .....

just wondering if you could give me a 'clue' regarding 17A413 on a SX or SY as i'm kinda lost figuring out what that C-75 plug is for.

Many Thanks

17A413 is wiring for the tailgate wiper motor..

GTLEGEND · 10-12-2022, 10:33 PM

Quote:

Originally Posted by bondy99

GTLEGEND,

I have a year 2000 AU2 6cyl.

The material thats affixed under the bonnet is now deteriorating.

Does Ford still have that pre-shaped material and the large clips, I think there are 12 clips from memory

image

image

image

image

I have replied to your thread in the AU-BF section..

GTLEGEND · 10-12-2022, 10:48 PM

Quote:

Originally Posted by T3rminator

Hey GT Legend,

Can you please advise if Ford still sell these COP pig tails or adaptors? These are from a 2004 Ford Falcon 5.4L 3v (Barra 220). If so, whats the part number and price? Thanks.

image

Can you confirm this is the same?

Coil Pig Tail.PNG