|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
The Pub For General Automotive Related Talk |
|
Thread Tools | Display Modes |
20-01-2022, 05:55 PM | #1081 | |||
Donating Member
Join Date: May 2008
Posts: 12,563
|
Quote:
If you are nervous, practice on a bonnet from the junk yard. Otherwise, start by working small areas, take your time and move with smooth and consistent speed. Remember to blow or brush out the pad between passes/sections. I would also recommend watching a few Youtube videos to see how it's done. This is what I used for 10 odd years as my first polisher. These were sold by Waxit as an entry into DA polishing. Mine was supplied with dusty Menzerna polishes.
__________________
PX MK II Ranger FG XR6 FG X XR8 Mustang GT T3 TS50 - gone but not forgotten |
|||
3 users like this post: |
20-01-2022, 06:02 PM | #1082 | ||
Regular Member
Join Date: Nov 2008
Location: Sydney
Posts: 908
|
I was thinking my mother has a mid-90’s holden commodore that desperately needs some attention. I’ll probably tackle that first before touching the Mustang. I’ve watched a couple of videos on the use of the DA polishers - Meguiars put out a pretty good one using their pads and polishers that looked straight forward to use. I also have a buffer/polisher as well (120w) - thinking I would use that to bring out the shine
Sent from my iPhone using Tapatalk
__________________
MY18 Mustang GT MY18 Everest Trend Harley Davidson FXBRS |
||
20-01-2022, 07:53 PM | #1083 | ||
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: In Front of a Monitor
Posts: 1,652
|
The DA Polisher is still my final frontier. I still have not purchased one yet.
My XR6T is sun trashed having spent most of its life outside, but is now kept under a car port. CarPro products have the paint on life support preserving what is left and stopping it getting worse. I am a little scared to attempt to do anything on it as to me, the clear coat is as close to failing and peeling as you can get. Bonnet & Roof are matt in finish and Boot not far behind. Tops of Doors are badly oxidised also. I am not sure of the consequences of attempting something like that or even if it can be saved without a respray.
__________________
2004 Mercury Silver Falcon XR6T - 5 Speed 2017 Platinum White Mustang GT - 6 Speed 2022 Blue Thai-Special for Daily Duties - Auto |
||
21-01-2022, 04:33 PM | #1084 | ||
FF.Com.Au Hardcore
Join Date: Jun 2010
Posts: 2,693
|
The first time I ever used a da polisher was on my 2 day old Mustang prior to ceramic coating it. I was pretty nervous about it(understatement) but they are actually quite forgiving.
I just started with a soft pad and finishing polish and quickly worked out I needed to go a bit heavier. I just watched a bunch of YouTube videos before hand and eased my way into it. It takes a while to work out it’s not a 5 minute job and it will take several passes to correct major defects, even on brand new cars. |
||
21-01-2022, 05:42 PM | #1085 | |||
Donating Member
Join Date: May 2008
Posts: 12,563
|
Quote:
On a forum elsewhere, I had to show some restraint when trying to explain, several times by me and many others, that his brand new Mustang would unlikely turn up from the factory perfect and scratch free. Even low volume manufacturers will struggle to achieve perfection. No car manufacturer, be it Ford, BMW, Porsche or even Bentley is going to spend 15, 20, 30 hours paint correcting every single car they make. I have seen many videos of Porsche's, Audi's, BMW's and Bentley's taken from brand new to a detailer and the defects when inspected are disappointing but reality. Now, I'm someone who will notice this sort of thing and have it bother me. Others wont notice and will be more than pleased with their new car.
__________________
PX MK II Ranger FG XR6 FG X XR8 Mustang GT T3 TS50 - gone but not forgotten |
|||
21-01-2022, 05:48 PM | #1086 | ||
Regular Member
Join Date: Nov 2008
Location: Sydney
Posts: 908
|
Well I’ve bit the bullet and a Shine Mate Ex15 kit is on its way. Been all over the Waxit Site and DBF FGXR6 I now understand.
First job is to tackle a 1996 VS Commodore then I will task my 2018 Mustang. I’ll keep the Repco DA for now - might be good to run some comparisons Sent from my iPhone using Tapatalk
__________________
MY18 Mustang GT MY18 Everest Trend Harley Davidson FXBRS |
||
This user likes this post: |
21-01-2022, 05:54 PM | #1087 | ||
Donating Member
Join Date: May 2008
Posts: 12,563
|
My Waxit order arrived today! Less than two day turn around is impressive.
A mixture of new and old. Reset and Bug Out are refills and the IronX a loyalty freebie. Descale, InnerQD and the Glass Mitt are new items. The Descale will be an interesting one, certainly not going to be used on my cars as it will strip waxes and sealants, but I do have a car on the docket soon that would be an ideal candidate for it. The Glass Mitt is a double sided item, one side is waffle weave and one is a denser microfiber. It could be a time saver not having to carry two separate towels at once.
__________________
PX MK II Ranger FG XR6 FG X XR8 Mustang GT T3 TS50 - gone but not forgotten |
||
21-01-2022, 06:03 PM | #1088 | |||
Donating Member
Join Date: May 2008
Posts: 12,563
|
Quote:
I laughed out loud reading this!!! Thanks for letting me help you spend your money!! Well done by the way! Can you link me to the kit you ordered?
__________________
PX MK II Ranger FG XR6 FG X XR8 Mustang GT T3 TS50 - gone but not forgotten |
|||
This user likes this post: |
21-01-2022, 06:06 PM | #1089 | ||
Regular Member
Join Date: Nov 2008
Location: Sydney
Posts: 908
|
Haha - thought you might laugh and yes thanks for helping spend my money
This is what I bought https://www.waxit.com.au/products/sh...QaAk_sEALw_wcB Sent from my iPhone using Tapatalk
__________________
MY18 Mustang GT MY18 Everest Trend Harley Davidson FXBRS |
||
This user likes this post: |
21-01-2022, 06:24 PM | #1090 | |||
FF.Com.Au Hardcore
Join Date: Jun 2010
Posts: 2,693
|
Quote:
We are not most people. Most people wash their car twice a year with some dirty old sponge and air dry it. It hurts me deep inside seeing relatively new cars with heavy swirl marks. I just want to yell at them “what are you doing” but I just bite my tongue and tell them how great their car looks. With a new Mustang just days away I get to start the process all over again. |
|||
21-01-2022, 06:33 PM | #1091 | |||
Donating Member
Join Date: May 2008
Posts: 12,563
|
Quote:
The S20 Black is a great one to start with as it's considered a one-step product, as in it cuts and then finishes in one step rather than using a heavy compound followed by a finer compound to finish. If you have compressed air, get a bucket and mist the inside with water, blow the pad out into the bucket. The water will help trap the dust inside the bucket and limit spreading it around your garage. I do this at a decent distance to the car to limit showing the car in polish dust. You would ideally also have a pad brush to go over the pad as well. I like the Rupes one because it can also be used to prime or "butter" a pad. It can also be used to help remove pads from the backing plate. https://www.detailstore.com.au/colle...-claw-pad-tool https://detailingshed.com.au/collect...itioning-brush You would blow out the pad after each set of passes.
__________________
PX MK II Ranger FG XR6 FG X XR8 Mustang GT T3 TS50 - gone but not forgotten |
|||
This user likes this post: |
21-01-2022, 06:37 PM | #1092 | |||
Regular Member
Join Date: Nov 2008
Location: Sydney
Posts: 908
|
Quote:
Thanks for the tips. I’m sure working on 26 year old paint (without any previous care) will be a challenge in itself but looking forward to seeing how this device works and the end result ! Sent from my iPhone using Tapatalk
__________________
MY18 Mustang GT MY18 Everest Trend Harley Davidson FXBRS |
|||
This user likes this post: |
21-01-2022, 07:29 PM | #1093 | |||
Regular Member
Join Date: Dec 2010
Posts: 359
|
Quote:
|
|||
22-01-2022, 12:08 AM | #1094 | |||
Regular Member
Join Date: Nov 2012
Posts: 283
|
Quote:
|
|||
22-01-2022, 12:20 AM | #1095 | ||
FF.Com.Au Hardcore
Join Date: Oct 2010
Location: Mid North Coast
Posts: 6,443
|
Whatever is on special at Supercheap Auto.
__________________
The Daily Driver : '98 EL Falcon, 5 Speed , 3.45 lsd The Week End Bruiser : FPV BF GT 40th Anniversary, 6 Speed Manual, 6/4 Brembo and lots of Herrod goodies Project 1 : '75 XB GS 351 Ute, Toploader, 9" with 3.5's Project 2 : '74 XB GS Big Block Coupe, Toploader, 9" with 4.11's In Storage : '74 XB GS 351 Fairmont Sedan XB Falcon Owners Group Mike's Man Cave |
||
22-01-2022, 05:37 PM | #1096 | |||
Donating Member
Join Date: May 2008
Posts: 12,563
|
Quote:
The Menzerna polishes give great results, I just found them excessively dusty.
__________________
PX MK II Ranger FG XR6 FG X XR8 Mustang GT T3 TS50 - gone but not forgotten |
|||
22-01-2022, 06:28 PM | #1097 | ||
#neuteredlyfe
Join Date: Apr 2012
Posts: 10,625
|
I bought one of these about 12 months ago.
https://www.repco.com.au/en/car-care...-15/p/A5466200 I haven't used it on a whole car as yet but when I have used it, it has seemed OK, then again, I was comparing it to a rockwell. I need to get onto the waxit website and order some pads etc. |
||
22-01-2022, 06:39 PM | #1098 | |||
Donating Member
Join Date: May 2008
Posts: 12,563
|
Quote:
https://www.waxit.com.au/collections...ate-pad-refill
__________________
PX MK II Ranger FG XR6 FG X XR8 Mustang GT T3 TS50 - gone but not forgotten |
|||
This user likes this post: |
22-01-2022, 08:01 PM | #1099 | ||
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: In Front of a Monitor
Posts: 1,652
|
What is the best value pads for the money for a beginner / weekend warrior?
__________________
2004 Mercury Silver Falcon XR6T - 5 Speed 2017 Platinum White Mustang GT - 6 Speed 2022 Blue Thai-Special for Daily Duties - Auto |
||
22-01-2022, 08:15 PM | #1100 | |||
Donating Member
Join Date: May 2008
Posts: 12,563
|
Quote:
Buying them in a kit or stack is a good way to buy them as they contain 3 different pad types so you can learn and experiment with what you like. They can then be bought individually. https://www.waxit.com.au/collections/kits-pad-stacks I like the Flat or Diamond Shine Mate pads as they are not as thick as say the Lake Country CCS, allowing for easier control over the machine while you learn. https://www.waxit.com.au/collections...ate-pad-refill https://www.waxit.com.au/collections...ate-pad-stacks You could also look at Apex Customs version - https://www.detailstore.com.au/colle...am-pads-6-or-7 Other detailing supply companies tend to not have pads in kit form so you will be otherwise buying pads individually. That's fine if you know what you like or need, the kit just makes it easier for a beginner.
__________________
PX MK II Ranger FG XR6 FG X XR8 Mustang GT T3 TS50 - gone but not forgotten |
|||
2 users like this post: |
23-01-2022, 07:54 PM | #1101 | ||
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: In Front of a Monitor
Posts: 1,652
|
One other question please.
Is the paint on the BA+ Series Falcon Considered Soft or Hard by the pad rating systems? Same question for the Mustangs paint. I am just trying to gain an understanding before I buy anything.
__________________
2004 Mercury Silver Falcon XR6T - 5 Speed 2017 Platinum White Mustang GT - 6 Speed 2022 Blue Thai-Special for Daily Duties - Auto |
||
23-01-2022, 08:04 PM | #1102 | ||
FF.Com.Au Hardcore
Join Date: Jun 2010
Posts: 2,693
|
Australian and American cars are considered medium to hard paint.
I certainly didn’t find my Mustang to have soft paint and needed pretty aggressive pads and polishing compounds to remove defects. Using soft pads and finishing compounds had little effect. |
||
23-01-2022, 08:14 PM | #1103 | ||||
Donating Member
Join Date: May 2008
Posts: 12,563
|
Quote:
Quote:
__________________
PX MK II Ranger FG XR6 FG X XR8 Mustang GT T3 TS50 - gone but not forgotten |
||||
This user likes this post: |
24-01-2022, 04:19 PM | #1104 | ||
Donating Member
Join Date: May 2008
Posts: 12,563
|
My Detailing Shed ordered arrived today!
The main reason for the order was for the foam cannon holder, but as usual I went nuts in the effort to get free shipping.
__________________
PX MK II Ranger FG XR6 FG X XR8 Mustang GT T3 TS50 - gone but not forgotten |
||
This user likes this post: |
24-01-2022, 06:14 PM | #1105 | ||
*barks incessantly
Join Date: Jun 2016
Location: SA
Posts: 1,563
|
This thread is an absolute gold mine! I'm considering starting up a mobile car detailing service and thanks to you guys I know what to put on my shopping list.
|
||
24-01-2022, 08:00 PM | #1106 | ||
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: In Front of a Monitor
Posts: 1,652
|
If you can organise it, it would be good to see a photo of what the inspection light can pick up.
__________________
2004 Mercury Silver Falcon XR6T - 5 Speed 2017 Platinum White Mustang GT - 6 Speed 2022 Blue Thai-Special for Daily Duties - Auto |
||
2 users like this post: |
24-01-2022, 08:05 PM | #1107 | ||
Regular Member
Join Date: Nov 2008
Location: Sydney
Posts: 908
|
My Shine Mate DA polisher arrived today with pads and polisher - nice bit of kit !!
Ordered some paint from dr color chip to fix a few stone chips in the paint of my project car. When that all arrives I’ll use this polisher on 26 years of paint that’s never seen anything but the occasional wash Sent from my iPhone using Tapatalk
__________________
MY18 Mustang GT MY18 Everest Trend Harley Davidson FXBRS |
||
26-01-2022, 07:19 PM | #1108 | ||
Oppressive patriarch
Join Date: Aug 2016
Location: Brisbane
Posts: 757
|
An attempt at bead porn of the roof of our 17-year-old daily....
With thanks to everyone here for their tips and hints. This is what happens when the wife was out shopping and it rained ...!!!
__________________
. Lamenting lost Australian manufacturing. |
||
30-01-2022, 09:52 AM | #1109 | ||
Oppressive patriarch
Join Date: Aug 2016
Location: Brisbane
Posts: 757
|
Bought a six pack from supercheap....
Soft, absorbent and better than expected!
__________________
. Lamenting lost Australian manufacturing. |
||
This user likes this post: |
30-01-2022, 04:13 PM | #1110 | |||
Donating Member
Join Date: May 2008
Posts: 12,563
|
Quote:
__________________
PX MK II Ranger FG XR6 FG X XR8 Mustang GT T3 TS50 - gone but not forgotten |
|||
2 users like this post: |