Genuine Ford Parts - Page 39

bazzaa · 25-12-2022, 12:35 PM

G'day,
Is it at all possible to get the overhead clocks that were fitted to BF GTs with dual zone ICCs? I've hunted high and low.

If not, is there at least a part number for them floating around?
(I understand some Territorys had them as well?)

KRISL · 25-12-2022, 01:04 PM

Merry Christ-mas GT legend, and all the thread starters, posters, and responders to help solve our ford life issues, no matter what day of the year it it �� ❤️

GTLEGEND · 25-12-2022, 06:59 PM

Quote:

Originally Posted by bazzaa

G'day,
Is it at all possible to get the overhead clocks that were fitted to BF GTs with dual zone ICCs? I've hunted high and low.

If not, is there at least a part number for them floating around?
(I understand some Territorys had them as well?)

Part number for the clock assembly was BA2T15000A, good luck finding one! You could also buy some of the components of the assembly as well (clock, housing, rear cover , mounting screws etc) all no longer available.

The assembly is different to the Territory.

GTLEGEND · 25-12-2022, 07:00 PM

Quote:

Originally Posted by KRISL

Merry Christ-mas GT legend, and all the thread starters, posters, and responders to help solve our ford life issues, no matter what day of the year it it �� ❤️

Merry Christmas to everyone, hope Santa was great to you all!!

pinzvidz · 26-12-2022, 02:35 AM

Quote:

Originally Posted by bazzaa

G'day,
Is it at all possible to get the overhead clocks that were fitted to BF GTs with dual zone ICCs? I've hunted high and low.

I'm in the same boat. I have a busted clock housing in my GT thanks to a rough roof lining fitter (previous owner arranged).

As mentioned by @GTLEGEND they're no longer available. However, Tom at GTP Reproductions on FB has mentioned that he might be looking to reproduce them one day, no ETA though at this stage.

bazzaa · 26-12-2022, 08:58 AM

Quote:

Originally Posted by pinzvidz

Tom at GTP Reproductions on FB has mentioned that he might be looking to reproduce them one day, no ETA though at this stage.

Thanks. I actually tripped over their FB page not long after coming here. Hopefully they go ahead with it, it's a frustrating quest. The original owner of mine had a new windscreen put in and they broke the clock.

Is there a guide for pulling one off the roof and pulling it apart anywhere you know of?

bazzaa · 26-12-2022, 09:00 AM

Quote:

Originally Posted by GTLEGEND

Part number for the clock assembly was BA2T15000A, good luck finding one! You could also buy some of the components of the assembly as well (clock, housing, rear cover , mounting screws etc) all no longer available.

The assembly is different to the Territory.

Cheers for that. A part number may at least help in the search.

So the housing of a Territory one is different? Or the internals are? Or the whole thing?

I was kind of hoping I could get hold of one and make something good out of it and my broken one.

**FairmontGS** · 26-12-2022, 09:59 AM

I’ve never seen the roof mounted clock, so don’t know what it looks like, but is this what you’re looking for?

https://www.ebay.com.au/itm/16508261...mis&media=COPY

GTLEGEND · 26-12-2022, 10:21 AM

Quote:

Originally Posted by bazzaa

Cheers for that. A part number may at least help in the search.

So the housing of a Territory one is different? Or the internals are? Or the whole thing?

I was kind of hoping I could get hold of one and make something good out of it and my broken one.

So if its any further help here are the part number breakdowns for both Falcon and Territory:

Falcon:

Clock assembly: BA2T15000A
Clock wiring: BA2T15026A
Rear Cover: BA2T15C000A
Digital Clock itself: BA2T15D000A
Main Clock Housing: BA2T15H000A
Retaining Screws: BA2T15S000A
Adhesive Pad Tape: BA2T15T000B

Territory:

Light Eucalyptus Colour

Clock Assembly: SX15000A7L
Bezel: SX15B000A
Retaining Screw: V800426S437

No other components listed for Territory.

bazzaa · 26-12-2022, 11:05 AM

Quote:

Originally Posted by GTLEGEND

So if its any further help here are the part number breakdowns for both Falcon and Territory:

Danke.
So a different coloured housing by the sound of it? I've not actually seen a Terry one.

bazzaa · 26-12-2022, 11:13 AM

Quote:

Originally Posted by FairmontGS

https://www.ebay.com.au/itm/165082617558

Yep, thanks, have seen those. Mine is more a matter of busted housing.
Did you notice there's also a guy selling those mechs with a blue backlit LED?

Magna · 26-12-2022, 11:30 AM

Quote:

Originally Posted by bazzaa

G'day,
Is it at all possible to get the overhead clocks that were fitted to BF GTs with dual zone ICCs? I've hunted high and low.

If not, is there at least a part number for them floating around?
(I understand some Territorys had them as well?)

Territory clocks are mounted in the sunglass holder

https://www.ebay.com.au/itm/23479996...item36ab2b3188

Citroënbender · 26-12-2022, 11:36 AM

Quote:

Originally Posted by Magna

Territory clocks are mounted in the sunglass holder

https://www.ebay.com.au/itm/23479996...item36ab2b3188

Another seller who’s overlooked the essential bracket above the roof lining!

Ben · 26-12-2022, 07:46 PM

Is the OEM AU T5 shifter bushing still available from ford?

Another thing regarding AU falcons are all the engine lower splash trays the same or are if I need a XR one does it need to be off an XR.

GTLEGEND · 26-12-2022, 11:18 PM

Quote:

Originally Posted by Ben

Is the OEM AU T5 shifter bushing still available from ford?

Another thing regarding AU falcons are all the engine lower splash trays the same or are if I need a XR one does it need to be off an XR.

What bush are you referring to? Do you mean number 9 in the image below?

AU Manual Shifter.png

All the lower splash trays/deflectors are the same on AU's, part number ER8B384A.

GT

Cherrybombbb · 26-12-2022, 11:58 PM

Is it still possible to get steering wheels through Ford for the FG Falcon and the horn pad

I know the wheel part is BG3600D1

I’m going into Ford next week for a service so if I know it’s avalible I may ask them to order one seeing I have a few vouchers to use at the dealership

GTLEGEND · 27-12-2022, 12:15 AM

Quote:

Originally Posted by Cherrybombbb

Is it still possible to get steering wheels through Ford for the FG Falcon and the horn pad

I know the wheel part is BG3600D1

I’m going into Ford next week for a service so if I know it’s avalible I may ask them to order one seeing I have a few vouchers to use at the dealership

That steering wheel part number supersedes to 8R2Z3K664AA but both the numbers are now obsolete.

The horn pad is actually part of the air bag and depending on what model you have can either be around $800 or $500. Still available though..

Cherrybombbb · 27-12-2022, 03:18 AM

What about the steering wheel buttons in black BG9C888A

Ben · 27-12-2022, 08:49 AM

Quote:

Originally Posted by GTLEGEND

What bush are you referring to? Do you mean number 9 in the image below?

Attachment 106044

All the lower splash trays/deflectors are the same on AU's, part number ER8B384A.

GT

t5 bushing.png

23 in attached pic is the bushing.

Thanks m8

GTLEGEND · 27-12-2022, 09:00 AM

Quote:

Originally Posted by Cherrybombbb

What about the steering wheel buttons in black BG9C888A

Yes, they are available, can get you them for $120 plus postage which should be around $10. Let me know if you want me to get for you.

GTLEGEND · 27-12-2022, 09:12 AM

Quote:

Originally Posted by Ben

Attachment 106045

23 in attached pic is the bushing.

Thanks m8

That has part number XFP7277A, no longer available genuine, but maybe Rare Spares or the alike?

arm79 · 27-12-2022, 09:20 AM

Quote:

Originally Posted by Ben

Attachment 106045

23 in attached pic is the bushing.

Thanks m8

Quote:

Originally Posted by GTLEGEND

That has part number XFP7277A, no longer available genuine, but maybe Rare Spares or the alike?

This might be of interest and to keep in the memory banks...

https://srpauto.com.au/ford-parts/tr...h-ea-bf-xg-xh/

https://srpauto.com.au/t5-gear-lever...d-ea-bf-xg-xh/

On the pricey side, but might outlive car.

EDIT - Just saw other brass options for the $25 to $35 mark. Google "T5 Gear Lever Bush for Ford EA-BF XG-XH".

**mad2** · 29-12-2022, 08:56 AM

Quote:

Originally Posted by bazzaa

Thanks. I actually tripped over their FB page not long after coming here. Hopefully they go ahead with it, it's a frustrating quest. The original owner of mine had a new windscreen put in and they broke the clock.

Is there a guide for pulling one off the roof and pulling it apart anywhere you know of?

the clock housing has a very good double sided tape on the base so it sticks solidly to the windscreen, so that is why they end up busted. possibly need a thin serated blade to cut the tape?. and the clock part from it is actually the mighty AU clock. it is also the same clock part fitted to the Terri console/roof clock/sunglass holder.

i found a cheap complete clock/housing & wiring loom ages ago, however the housing has a coupla broken bits [that i can hopefully repair or replace?]. weird looking when mounted behind the rear view mirror. and as i found when looking at it ...... the clock housing MUST be removed first from the windscreen before you can think about undoing the housing screws.

Quote:

Originally Posted by arm79

This might be of interest and to keep in the memory banks...

https://srpauto.com.au/ford-parts/tr...h-ea-bf-xg-xh/

https://srpauto.com.au/t5-gear-lever...d-ea-bf-xg-xh/

On the pricey side, but might outlive car.

EDIT - Just saw other brass options for the $25 to $35 mark. Google "T5 Gear Lever Bush for Ford EA-BF XG-XH".

there's also

T5

T5

altho they both only say "XF XG EA EB ED EF EL" but a slightly cheaper price.

cheers

KRISL · 29-12-2022, 09:35 AM

Thin wire like fishing tracer is good for getting behind things to cut two sided tape or glue

GTLEGEND · 29-12-2022, 04:35 PM

For silverBA:

SX SY Rear Suspension.png

silverBA · 30-12-2022, 11:22 AM

GT you are a LEGEND.
Thanks so much again.
The arm that has many different names on Ebay is in the center of 5A649B. These in pictures look the same for the Ba Falcon and the SX 2005 Ford Territory. Could you kindly check if they are the same please. Thanks Gazza.

GTLEGEND · 30-12-2022, 11:53 AM

Quote:

Originally Posted by silverBA

GT you are a LEGEND.
Thanks so much again.
The arm that has many different names on Ebay is in the center of 5A649B. These in pictures look the same for the Ba Falcon and the SX 2005 Ford Territory. Could you kindly check if they are the same please. Thanks Gazza.

Hi Gazza,

No problem, happy to assist.

So the arm is same LH/RH and has a description of: ARM ASSY - REAR SUSPENSION, LOWER ARM - REAR, RH/LH

For BA/BF the part number is BA5A649B.

For SX Territory, the part number is SX5A649B.

So based on catalogue data, they are different. Not that I have seen them side by side to compare, but there must be some sort of difference be it minor or major and they may in fact be interchangeable, but by part number they are different.

Let me know if you need any help sourcing any of the parts.

GT

Ben · 31-12-2022, 08:27 AM

Hi would you know the motorcraft part number for the AU2 XR8 Cam Angle Sensor + Synchronizer?

GTLEGEND · 01-01-2023, 11:41 AM

Quote:

Originally Posted by Ben

Hi would you know the motorcraft part number for the AU2 XR8 Cam Angle Sensor + Synchronizer?

Hi Ben,

Synchronizer has part number XL2Z12A362AA, the stator on top is 1F1Z6B288BA.

Is that what you were after?

GT

Ben · 02-01-2023, 12:38 AM

Quote:

Originally Posted by GTLEGEND

Hi Ben,

Synchronizer has part number XL2Z12A362AA, the stator on top is 1F1Z6B288BA.

Is that what you were after?

GT

yes thanks mate