AU Turbo - Page 4

b2tf · 26-02-2008, 09:54 PM

You will defnitely notice a difference of 40kw, but moreso the torque increase. If it were me I would put the rebuild kit in your current engine though, saves having to do a swap further down the track.

AU2PWR · 26-02-2008, 09:55 PM

Its more for Peace of mind ..

Nah , Get home today ,, 3 Boxes at my Doorstep ...

1. Newer Intercooler .
2. Rising Rate Fuel Reg
3. Air Fuel Gauge ..

Ahh , I Love eBay ..

Let the Boosting begin !

AU2PWR · 26-02-2008, 09:57 PM

Quote:

Originally Posted by b2tf

You will defnitely notice a difference of 40kw, but moreso the torque increase. If it were me I would put the rebuild kit in your current engine though, saves having to do a swap further down the track.

Yeah , thats also a very good Idea , Like i said , its more for peace of mind , knowing that there is something Stronger there than there was before.

40kWs and ill be Over the Moon .. Phsssst !

fordman_01 · 27-02-2008, 08:37 PM

wish i could turbo my falcon, f!#king P laws

FGII-XR6 · 27-02-2008, 09:59 PM

Quote:

Originally Posted by fordman_01

wish i could turbo my falcon, f!#king P laws

they are there to help you stay alive you'll have plenty of time for a turbo when you graduate

private9 · 27-02-2008, 09:59 PM

Quote:

Originally Posted by AU2PWR

Yeah , thats also a very good Idea , Like i said , its more for peace of mind , knowing that there is something Stronger there than there was before.

40kWs and ill be Over the Moon .. Phsssst !

I personally would take it as a challenge to see what my 190k old bottom end could put up with!

40kws and you'll be over the moon - until you get bored after week, then you'll NEED more :Up_to_som :

ten[A]cio[U]s · 15-04-2009, 12:36 PM

Its been a looooong time mate. Any news on the car? Still got it? Hows it going? Etc?

Duffman · 02-07-2009, 07:32 PM

Hey Crazy-au, its all going well I haven't had a chance to get on the forum much lately. The car is finished it however this week is getting a new battery and a service then its in for a re-tune but all the work is done! I haven't taken any pics in ages this is the newest pic I have and its a few years old http://i3.photobucket.com/albums/y67/au2/P1010410.jpg

The turbo has definatly been worthwhile and was worth it all in the end. I had to get a screamer pipe put on however which has made it very loud under boost it sounds a bit like a tractor. The car runs well still and has no problems at all so I can't really bring myself to get another car when it works perfectly. Ill post up a few pics/info over the next few days

GeoNazi · 02-07-2009, 07:38 PM

I just read this thread and didn't see anything about rods and pistons (if it was there i am sorry someone quote it), it is a known fact the AU rods are pretty dodgey when under pressure from boosts. how did you over come this?

tjb45 · 02-07-2009, 08:40 PM

Quote:

Originally Posted by GeoNazi

I just read this thread and didn't see anything about rods and pistons (if it was there i am sorry someone quote it), it is a known fact the AU rods are pretty dodgey when under pressure from boosts. how did you over come this?

Is it really a known fact that the rods are dodgy? I know of two au engines, one with 250rwkw the other 270rwkw both completely standard with no rod issues..

blackers10 · 02-07-2009, 08:43 PM

nothing wrong with AU pistons and rods

if you want stronger pistons and rods goto atomic performance.. they do the 660kw bottom ends for BA turbos and can also get AU ones

The Monty · 03-07-2009, 01:52 AM

Never knew AU rods were weak. Ive always known the bottom ends to be good for around 450hp.