Genuine Ford Parts

[GTLEGEND]

Originally Posted by mchaggis

Thanks for the quick response, I've taken a pic of the single lug left in the drivers side. I've tried different eBay and Jefferson Ford listings, but they all are subtly different.

Cheers.

Leave it with me for a bit will see what I can find. What part numbers have you seen or tried so far?

[mchaggis]

Originally Posted by GTLEGEND

Leave it with me for a bit will see what I can find. What part numbers have you seen or tried so far?

Thanks again GT.

It was Bayford, and the ID was W715014SS3JA6. Although as I look at the listing it's FG, so was never going to work, but I hadn't seen anything so gave it a go. The others that I've tried are the lugs that fit the aftermarket 'Tickford' embroidered mats that you find around the place.

Cheers.

[GTLEGEND]

Originally Posted by mchaggis

Thanks again GT.

It was Bayford, and the ID was W715014SS3JA6. Although as I look at the listing it's FG, so was never going to work, but I hadn't seen anything so gave it a go. The others that I've tried are the lugs that fit the aftermarket 'Tickford' embroidered mats that you find around the place.

Cheers.

Definitely not that part, that a plastic clip made to secure mats on pretty much everything bar any Falcon including FG.

Give me a few days, I will see what I can dig up, they may be no longer available but hopefully we can at least dig up a part number. It may have also been part of the mat kit and not available separately. Be in touch..

[XR Martin]

It may have been mentioned prior, but can you obtain the security codes for EA - AU radios?

[GTLEGEND]

Originally Posted by XR Martin

It may have been mentioned prior, but can you obtain the security codes for EA - AU radios?

Possibly, as long as the radio is from the original VIN, in other words need to know the VIN the radio was originally from. If there has been a swap over the years, it may come back incorrect. Worth a shot though..

[Linz]

Hey GT, was there a revised bonnet cable and fuse box for B series cars to fix the common breakages a few years ago?
Thought I recalled a stronger fuse box mounting point where the bonnet cable attached?

[GTLEGEND]

Originally Posted by Linz

Hey GT, was there a revised bonnet cable and fuse box for B series cars to fix the common breakages a few years ago?
Thought I recalled a stronger fuse box mounting point where the bonnet cable attached?

Hi Linz,

I am pretty sure there was no updated cable, just the fuse box. It went from a BAF14A073A part number to a BA14A073A. If memory serves me right the change came about in 2010..

[FPV 460]

Originally Posted by GTLEGEND

So B is $124

C is $310

F is $24

G is $90

All still currently available, postage on top of course which pending on weight around $20.

Hi GT. after some research im wondering if its possible to get C pulley only without the tensioner arm?

cheers

[GTLEGEND]

Originally Posted by FPV 460

Hi GT. after some research im wondering if its possible to get C pulley only without the tensioner arm?

cheers

Hey mate,

Officially no. I am not sure if the pulley is bolted or pressed on to the tensioner, would need to see one in person. It may not easily be removed, but if it is, then we would need to see if it matches the other pulleys.

Guessing Ford made it non removable for a reason if so.

[FPV 460]

Originally Posted by GTLEGEND

Hey mate,

Officially no. I am not sure if the pulley is bolted or pressed on to the tensioner, would need to see one in person. It may not easily be removed, but if it is, then we would need to see if it matches the other pulleys.

Guessing Ford made it non removable for a reason if so.

Ok thanks for that.

Can i then please just order B, F and G ?

Cheers

[GTLEGEND]

Originally Posted by FPV 460

Ok thanks for that.

Can i then please just order B, F and G ?

Cheers

Sure just PM me and we can go from there unless you still have the details and do as per previous times.

[bondy99]

GTLEGEND

Would you know if this screw holder is still available?




I may require a new one down the track when I start working on the rusted panel.

Thanks

[GTLEGEND]

Originally Posted by bondy99

GTLEGEND

Would you know if this screw holder is still available?


image

I may require a new one down the track when I start working on the rusted panel.

Thanks

For which vehicle?

[XR Martin]

Originally Posted by GTLEGEND

For which vehicle?

Looks like AU-Bf, under the scuff panel.

[GTLEGEND]

Originally Posted by XR Martin

Looks like AU-Bf, under the scuff panel.

If its AU-BF, then yes can still get but only a handful left.

[bondy99]

[QUOTE=GTLEGEND;6788501]For which vehicle?[/QUOTE

The vehicle is an AU2

[bondy99]

Originally Posted by GTLEGEND

If its AU-BF, then yes can still get but only a handful left.

What would be the cost for those?
Thanks

[GTLEGEND]

Originally Posted by bondy99

What would be the cost for those?
Thanks

$2 each plus postage..

[bondy99]

Originally Posted by GTLEGEND

$2 each plus postage..

I'll need 3, send me a pm with details.
Thanks

[GTLEGEND]

Originally Posted by mchaggis

Thanks again GT.

It was Bayford, and the ID was W715014SS3JA6. Although as I look at the listing it's FG, so was never going to work, but I hadn't seen anything so gave it a go. The others that I've tried are the lugs that fit the aftermarket 'Tickford' embroidered mats that you find around the place.

Cheers.

Is this the clip(s) you are looking for?

Floor Mat Fastener.jpg

Floor Mat Fastener 2.jpg

[mchaggis]

Originally Posted by GTLEGEND

Is this the clip(s) you are looking for?

Attachment 106248

Attachment 106249

I'll give it a go. Thanks so much for following up. Will you PM bank details? How many are available? I may as well take 4 if I can.

Cheers.

[KRISL]

Do these screw into somthing under the carpet or is that thread going to grip into the carpet?
Are these the fg1 model?
Cheers

Originally Posted by GTLEGEND

Is this the clip(s) you are looking for?

Attachment 106248

Attachment 106249

[George V]

Hi GT,
Rocker shims for AU 6 Cyl - are they available?

Regards,
George

[GTLEGEND]

Originally Posted by George V

Hi GT,
Rocker shims for AU 6 Cyl - are they available?

Regards,
George

Hi George,

1.9mm Rocker shims that between the lash adjuster and the arm of the rocker had part number ED6K514A, obsolete and no longer available.

They were also part of the whole rocker arm assembly, part number EL6564B but they are also long gone.

GT

[GTLEGEND]

Originally Posted by mchaggis

I'll give it a go. Thanks so much for following up. Will you PM bank details? How many are available? I may as well take 4 if I can.

Cheers.

I believe there are about a dozen left, will PM you with details.

[GTLEGEND]

Originally Posted by KRISL

Do these screw into somthing under the carpet or is that thread going to grip into the carpet?
Are these the fg1 model?
Cheers

Look at image in post 1228, it screws into speed nut HC5. Suits BA BF FG FG2..

[KRISL]

Thanks, any idea what the speed nut clip clips to? To sop it spinning

Originally Posted by GTLEGEND

Look at image in post 1228, it screws into speed nut HC5. Suits BA BF FG FG2..

[George V]

Originally Posted by GTLEGEND

Hi George,

1.9mm Rocker shims that between the lash adjuster and the arm of the rocker had part number ED6K514A, obsolete and no longer available.

They were also part of the whole rocker arm assembly, part number EL6564B but they are also long gone.

GT

Thanks GT.

Regards, George

[GTLEGEND]

Originally Posted by KRISL

Thanks, any idea what the speed nut clip clips to? To sop it spinning

There is also a plate strip that runs along the floor across the front of the seat.

[KRISL]

Hi GT.
I'm after the plastic guard for behind the left rear wheel
on a fg gt
Local Ford say there is no option,
it is trimmed differently where it meets the bumper,
And holes are in the wrong place to trim a standard xr g6 one

Cheers