Genuine Ford Parts

[GTLEGEND]

Originally Posted by aussiblue

Hi GTLegend. Can you help us out on this thread https://fordforums.com.au/showthread.php?t=11497819and advise not only the price and availability of the spherical vacuum reservoir in tne FG, but also confirm it's actual purpose please?

Have replied..

[GTLEGEND]

Originally Posted by Vicusj

Hi GT, I tried to search online for these trim clips, but no luck yet.

These metal clips are for holding in place the piece of plastic strip in the Territory's rear tailgate upper sill, where the coiled power cable to the tailgate goes into the roof cavity.

I haven't been to SCA etc to look for alternatives, was just wondering what are these called, perhaps availability of originals?

Are you referring to the clips labelled HC1 in the image below:

SX SY Tailgate Inner Trim.jpg

[bondy99]

GT,
I managed to obtain a working electric car aerial for the AU2.

Problem is, the plug connector is missing.

Would those plug connectors still obtainable? If not, do you have a diagram / pic as to what they look like?

Thanks bondy.

[aussiblue]

Problem is, the plug connector is missing.

Would those plug connectors still obtainable? If not, do you have a diagram / pic as to what they look like?

If it's like this ebay one https://www.ebay.com.au/itm/23494409...Bk9SR_zms4H7YQ do you mean the pliug on the blacker aerial coax or the power cable red and green wires i.e. this bit hat's wrapped in foam?



If so, you should be able to crimp a two pin molex like this on https://www.altronics.com.au/p/h2309...ine-connector/ to the wire you have and on the aerial. RS Components likely will have the exact fitting part if that's your preference see https://au.rs-online.com/web/c/conne...rchTerm=molex. etc. Possibily this https://au.rs-online.com/web/p/wire-...-plugs/7976569 but if not, and you search with the string "Molex 2-way" on the RS Components site you'll find other options in the thousands they list..

If the aerial coax this: https://www.altronics.com.au/p/p0184...-antenna-plug/ or https://www.jaycar.com.au/solderless...0f94423916de00 will do it.

[bondy99]

aussieblue,
Yes, it's the power cable plug where the green and red wires go into.

Photo does help.
Cheers.

[Vicusj]

Originally Posted by GTLEGEND

Are you referring to the clips labelled HC1 in the image below:

Attachment 106410

Thanks for checking GT, I'm unsure if those are the same, but these are the clips I'm after in this trim. I lost 2 of them and the others are sooo rusted, it started to rust the lip they clip into as well.:

[GTLEGEND]

Originally Posted by Vicusj

Thanks for checking GT, I'm unsure if those are the same, but these are the clips I'm after in this trim. I lost 2 of them and the others are sooo rusted, it started to rust the lip they clip into as well.:

Let me see if I can confirm. Give me a couple of days to get my hands on them and get back to you.

GT

[GTLEGEND]

Originally Posted by Vicusj

Thanks for checking GT, I'm unsure if those are the same, but these are the clips I'm after in this trim. I lost 2 of them and the others are sooo rusted, it started to rust the lip they clip into as well.:

Are you able to take a closer picture or write down the part numbers that are on the back of the trim you are holding please.

[GTLEGEND]

Originally Posted by bondy99

GT,
I managed to obtain a working electric car aerial for the AU2.

Problem is, the plug connector is missing.

Would those plug connectors still obtainable? If not, do you have a diagram / pic as to what they look like?

Thanks bondy.

I would need to see the connector face to see if one is available, cant remember what one looks like and the image provided is not clear enough.

[BFIIGhiaZF6]

Hi GT, could you please try and source a tailgate pull down strap for me, 434A14, like the one in this pic,



I would like to fit one to my boot lid.

Thanks, George.

[bondy99]

Originally Posted by GTLEGEND

I would need to see the connector face to see if one is available, cant remember what one looks like and the image provided is not clear enough.

Hi GT,
I do understand. I too have not seen what it looks like, the image I seen earlier was wrapped around with some type of foam material.

[Vicusj]

Originally Posted by GTLEGEND

Are you able to take a closer picture or write down the part numbers that are on the back of the trim you are holding please.

The only number on it is VT3273. And the matrix thingy denoting the manufacturing year and month.

Don’t spend much of your time on this one GT, if this number doesn’t lead to anything, i can just stick the trim back with some good quality double sided tape 👍

[aussiblue]

I too have not seen what it looks like, the image I seen earlier was wrapped around with some type of foam material.

They are wrapped in foam to prevent them rattling behind the dash. I think the EL used the same power antenna if that's any help. My parts microfiche for the EF /ELdoes not list the connector as a separate part though.

[GTLEGEND]

Originally Posted by BFIIGhiaZF6

Hi GT, could you please try and source a tailgate pull down strap for me, 434A14, like the one in this pic,

image

I would like to fit one to my boot lid.

Thanks, George.

Hi George,

Not a problem, $25 plus postage, choice of Warm Charcoal or Medium Eucalyptus colours.

Let me know which one you want.

PM if you want to get.

GT

[Vicusj]

Originally Posted by GTLEGEND

Are you able to take a closer picture or write down the part numbers that are on the back of the trim you are holding please.

Thanks GT, here couple of closer piccies:

[FPV 460]

Hi GTL. any chance of NOS FG FALCON RADIATOR HEADER TANK OVER FLOW BOTTLE availability and price for 2011 boss335?

cheers

[GTLEGEND]

Originally Posted by Vicusj

Thanks GT, here couple of closer piccies:

I need a close up of those numbers to the far right where the Ford symbol is..

[GTLEGEND]

Originally Posted by FPV 460

Hi GTL. any chance of NOS FG FALCON RADIATOR HEADER TANK OVER FLOW BOTTLE availability and price for 2011 boss335?

cheers

Yeh should not be an issue, $80 plus postage (radiator cap not included).

If you need the cap as well they are obsolete so would need to go searching.

[Vicusj]

Originally Posted by GTLEGEND

I need a close up of those numbers to the far right where the Ford symbol is..

Ah ok, that's just the matrix showing the DOM i think :

[GTLEGEND]

Originally Posted by Vicusj

Ah ok, that's just the matrix showing the DOM i think :

I was trying to see where that part sits because it soes not look like it is in that picture I added earler?

Anyhow I have some of the clips I mentioned coming, see what they look like.

[Ozboi]

Hi GT

I am after part number, price, and availability for the front hub/bearing unit mounting bolts for a FG Falcon i6 4L 2008, VIN: 6FPAAAJGCM8C75922, Rego OZB01 please.

Thanks
Jason

[GTLEGEND]

Originally Posted by Ozboi

Hi GT

I am after part number, price, and availability for the front hub/bearing unit mounting bolts for a FG Falcon i6 4L 2008, VIN: 6FPAAAJGCM8C75922, Rego OZB01 please.

Thanks
Jason

Hi Jason,

Part number of the hub to knuckle bolts is W705821S439, $19.50 each and still available. I am sure there are 3 per side required. $10 for tracked postage if need be.

GT

[Vicusj]

Originally Posted by GTLEGEND

I was trying to see where that part sits because it soes not look like it is in that picture I added earler?

Anyhow I have some of the clips I mentioned coming, see what they look like.

Hi GT,

Correct, this trim is not on the tailgate itself, but on the vehicle body where Ive circled in red in this piccie.
Thanks again ;)

[GTLEGEND]

Originally Posted by Vicusj

Hi GT,

Correct, this trim is not on the tailgate itself, but on the vehicle body where Ive circled in red in this piccie.
Thanks again ;)

Ok so I have found that trim and seems the clips were never sold separate, I have others coming to see if they are the same. Wait and see..

SX Territory Roof Trims.jpg

[FPV 460]

Originally Posted by GTLEGEND

Yeh should not be an issue, $80 plus postage (radiator cap not included).

If you need the cap as well they are obsolete so would need to go searching.

thanks GTL. can i get the part number so i can be sure its the one im after? i want a smooth finish on the plastic as per OEM and not the frosted/matt finish as per DAYCO ones.

thanks again.

[Linz]

Hi GT, are the BA/BF front guard side repeater lights still available please?

P8250021 by Linz, on Flickr

There's heaps of non genuine ones out there, but thought I'd check if genuine are still available.

[GTLEGEND]

Originally Posted by FPV 460

thanks GTL. can i get the part number so i can be sure its the one im after? i want a smooth finish on the plastic as per OEM and not the frosted/matt finish as per DAYCO ones.

thanks again.

No worries, part number: AR2Z8A080BA.

[GTLEGEND]

Originally Posted by Linz

Hi GT, are the BA/BF front guard side repeater lights still available please?

imageP8250021 by Linz, on Flickr

There's heaps of non genuine ones out there, but thought I'd check if genuine are still available.

Sorry mate all gone

[Citroënbender]

The arrow points to where a steel water transfer pipe sockets into a cast alloy housing which also supports the thermostat above.

(Picture from BBT Jap Parts of Lambton NSW, via Fleabay.)

Is the o-ring seal for that steel pipe, anything unusual like a square profile? I have a modest leak on the Territory’s one, and maybe also the white ute… If it’s a specific Ford part, are they still available? (I’m using 2:1 green coolant which has a knack of finding small leaks.)

[Bossxr8]

It's not a square profile. Just your regular o-ring.