Genuine Ford Parts

[GTLEGEND]

Originally Posted by Citroënbender

The arrow points to where a steel water transfer pipe sockets into a cast alloy housing which also supports the thermostat above.

(Picture from BBT Jap Parts of Lambton NSW, via Fleabay.)

Is the o-ring seal for that steel pipe, anything unusual like a square profile? I have a modest leak on the Territory’s one, and maybe also the white ute… If it’s a specific Ford part, are they still available? (I’m using 2:1 green coolant which has a knack of finding small leaks.)

image

Normal round profile O ring, not specific for Ford I guess, but you can still get new. $5.50 each..

[XR Martin]

Ford one is green. Not sure if it's a different material than your average o-ring, but for the sake of $5 why would you bother trying something else.
If the original lasted 10 years that means you shouldn't have to worry about it for another 10.

[au2000]

Hi all.. just hunting a fg fpv lower grille surround? Hopefully someone can point me in the right direction. Thanks

[GTLEGEND]

Originally Posted by au2000

Hi all.. just hunting a fg fpv lower grille surround? Hopefully someone can point me in the right direction. Thanks

Need to be more specific, there are 4 different lower grille surrounds on FPV specific front bars, one for GT/Pursuit, one for GTE/F6E, one for GTP/Super Pursuit or F6? Which one you chasing?

[au2000]

Tbh im looking at either a GTE one or a GT one...

[GTLEGEND]

Originally Posted by au2000

Tbh im looking at either a GTE one or a GT one...

GT one is obsolete which was a black finish, GTE is a chrome finish and can get, but they are (hope your sitting down) $1400. Just to confirm, we are talking about part 17D749A in pic below.

FG FPV Front Bumper.jpg

[au2000]

i was thankfully.... but expected as much....
im assuming that part 17D749B relates to the F6 ? if so.. im assuming obsolete also?
But thanks for the confirmation GT Legend..

[au2000]

btw.. 8422 ? available for a GTE also?

[GTLEGEND]

Originally Posted by au2000

i was thankfully.... but expected as much....
im assuming that part 17D749B relates to the F6 ? if so.. im assuming obsolete also?
But thanks for the confirmation GT Legend..

F6 was a Graphite Metallic colour, yes obsolete as well, but only recently.

[GTLEGEND]

Originally Posted by au2000

btw.. 8422 ? available for a GTE also?

8422 is the same for all, but obsolete as well.

[aussiblue]

Can you help this new member with his XC Distributor rotor search please https://fordforums.com.au/vbportal/f...php?t=11497931

[au2000]

Gt legend, 1 last question if I may, for 17D749A does that need another part to attach behind it ? If I read it right , that one is 2 parts, the frame and grille, but the top grille is 3 seperate parts?

[GTLEGEND]

Originally Posted by au2000

Gt legend, 1 last question if I may, for 17D749A does that need another part to attach behind it ? If I read it right , that one is 2 parts, the frame and grille, but the top grille is 3 seperate parts?

So the lower opening has a grille and moulding held in with screws.

The upper grill is the same, the third part you see 17C881 is an energy absorbing foam pad.

Does that answer your question?

[au2000]

Originally Posted by GTLEGEND

So the lower opening has a grille and moulding held in with screws.

The upper grill is the same, the third part you see 17C881 is an energy absorbing foam pad.

Does that answer your question?

absolutley GT Legend.. just means it's 1 less thing ill be hunting for ! Can't thank you enough for your imput.

[bondy99]

GT
I have a power steering rack on my AU2 6 cylinder that might replacement. Can any other model apart from AU2 fit or needs to be only AU2?

Thanks

[GTLEGEND]

Originally Posted by bondy99

GT
I have a power steering rack on my AU2 6 cylinder that might replacement. Can any other model apart from AU2 fit or needs to be only AU2?

Thanks

There are 6 different racks in AU-AU2-AU3 Series, breakdown below:

6 Cyl: Forte, Futura, XR, S & Fairmont Sedans AU/AU2/AU3.

8 Cyl Forte, Futura, XR & Fairmont Sedans, Forte/Fairmont Wagon. AU/AU2/AU3.

6 Cyl Ghia AU AU2 AU3

8 Cyl Ghia Tickford Fairlane & T Series AU AU2 AU3

6 Cyl Fairlane/LTD AU AU2 AU3

8 cyl Fairlane/LTD AU AU2 AU3

So based on this, unless yours is a Ghia or Fairlane/LTD, you would need to find one out of any AU/AU2/AU3 that us a Forte/Futura/XR/S or Fairmont.

[78xcgxl]

Hi GT, I am wanting to do the FGX black headliner conversion to my FG Mk2 XR6T ute. Just wondering on the availability of parts, part numbers and prices when you have a chance. Thank you

[GTLEGEND]

Originally Posted by 78xcgxl

Hi GT, I am wanting to do the FGX black headliner conversion to my FG Mk2 XR6T ute. Just wondering on the availability of parts, part numbers and prices when you have a chance. Thank you

Hey mate,

Here is a list of all the parts required and their part numbers. Most are no longer available. I will need to go through and update whats still available and their pricing, but most are long gone now as another member not long finished doing the same thing and is still missing items. I think easiest option would be to find a wrecked FGX and get all the trims from it.

RH A Pillar trim: AR2ZF03512CBSH
LH A Pillar trim: AR2ZF03513CBSH
RH B Pillar trim: 8R2ZF24396ACSH
LH B Pillar trim: 8R2ZF24397ACSH
B Pillar Screw Cap: 8R2ZF24452BBSH (you need 2).
B Pillar Seat Belt Bolt Cover: 8R2ZF610C29AASH (you need 2).
RH C Pillar Trim: AR2ZF31002ACSH
LH C Pillar Trim: AR2ZF31003ACSH
RH Sunvisor: 8R2ZF04100ABSH
LH Sunvisor: 8R2ZF0410ABSH
Sunvisor Retaining Clips: 8R2ZF041K16AASH (you need 2).
Roof Lamp Bezel: 8R2Z13K767CASH
Rear Side Lamp Bezel: WR2Z13A701AFSH
Rear Roof Lining Clips: W713485SSSH (you need 2)
RH Grab Handle: 8R2ZF31406ABSH
LH Grab Handle: 8R2ZF31406BBSH (you need 2).

[GXA]

Hi GT,

Have a 2008 FG GT-E.

Looking for wiper arm caps, and also the y piece for the washers that clips into the passenger side firewall. It has an internal non-return valve.

Thanks

[GTLEGEND]

Originally Posted by GXA

Hi GT,

Have a 2008 FG GT-E.

Looking for wiper arm caps, and also the y piece for the washers that clips into the passenger side firewall. It has an internal non-return valve.

Thanks

Wiper arm caps, part number BGF04178A, obsolete and non around unless someone has in their private stash. 2nd hand may be your only option at the moment.

Washer Y piece is actually part of the LH wiper cowl panel and you have to buy that to get the Y piece. $85 plus postage.

[GXA]

Originally Posted by GTLEGEND

Wiper arm caps, part number BGF04178A, obsolete and non around unless someone has in their private stash. 2nd hand may be your only option at the moment.

Washer Y piece is actually part of the LH wiper cowl panel and you have to buy that to get the Y piece. $85 plus postage.

Thanks for the prompt reply.

[Vicusj]

Originally Posted by GXA

and also the y piece for the washers that clips into the passenger side firewall. It has an internal non-return valve.

Thanks

If this might help out anyone, I had issues with my Territory's non-return valve perhaps 10 years ago and fitted an ~$3 aquarium air pump non-return valve as a "temporary" solution. It is still working perfectly to the day (unless I have now jinxed it!)

[78xcgxl]

Originally Posted by GTLEGEND

Hey mate,

Here is a list of all the parts required and their part numbers. Most are no longer available. I will need to go through and update whats still available and their pricing, but most are long gone now as another member not long finished doing the same thing and is still missing items. I think easiest option would be to find a wrecked FGX and get all the trims from it.

RH A Pillar trim: AR2ZF03512CBSH
LH A Pillar trim: AR2ZF03513CBSH
RH B Pillar trim: 8R2ZF24396ACSH
LH B Pillar trim: 8R2ZF24397ACSH
B Pillar Screw Cap: 8R2ZF24452BBSH (you need 2).
B Pillar Seat Belt Bolt Cover: 8R2ZF610C29AASH (you need 2).
RH C Pillar Trim: AR2ZF31002ACSH
LH C Pillar Trim: AR2ZF31003ACSH
RH Sunvisor: 8R2ZF04100ABSH
LH Sunvisor: 8R2ZF0410ABSH
Sunvisor Retaining Clips: 8R2ZF041K16AASH (you need 2).
Roof Lamp Bezel: 8R2Z13K767CASH
Rear Side Lamp Bezel: WR2Z13A701AFSH
Rear Roof Lining Clips: W713485SSSH (you need 2)
RH Grab Handle: 8R2ZF31406ABSH
LH Grab Handle: 8R2ZF31406BBSH (you need 2).

Cheers mate, I figured most would be obsolete my now. Being a Ute, I need a few less parts. I see you can still get sunvisors online at Bayford, hence i had a little bit of hope. Clips wise I'm not too fused, I'd just paint the cream ones. I agree with finding a wreck but there were not many FGX XR UTEs made in the first place and people want more $$$ than new parts. If I could the get info on the smaller list below when you have a chance. It would be much appreciated and i will reassess my options. Thank You


- Both A Pillars ( G6ET fabric ones or just standard XR)
- Ute B Pillar trims and screw caps
- Ute Small interior light bezel ( nea rear window)
- Ute Seat belt screw caps
- Ute headliner
- Standard Map lights between sunvisors ( i highly doubt a sunglasses holder one is still available)
- 1x LH grab handle.

[GTLEGEND]

Originally Posted by 78xcgxl

Cheers mate, I figured most would be obsolete my now. Being a Ute, I need a few less parts. I see you can still get sunvisors online at Bayford, hence i had a little bit of hope. Clips wise I'm not too fused, I'd just paint the cream ones. I agree with finding a wreck but there were not many FGX XR UTEs made in the first place and people want more $$$ than new parts. If I could the get info on the smaller list below when you have a chance. It would be much appreciated and i will reassess my options. Thank You


- Both A Pillars ( G6ET fabric ones or just standard XR) RH Cloth Trim $140 or Moulded Plastic style $40. LH Cloth Trim $120. LH Moulded one is obsolete NLA.
- Ute B Pillar trims and screw caps (Guessing upper) RH $60 LH Obsolete Screw caps also obsolete.
- Ute Small interior light bezel ( nea rear window) $15
- Ute Seat belt screw caps $5
- Ute headliner Obsolete
- Standard Map lights between sunvisors ( i highly doubt a sunglasses holder one is still available) Std $200 Sunglass Holder Obsolete
- 1x LH grab handle obsolete.

Hope that helps.

[mchaggis]

Hi GTLegend, I'm after the three FPV badges for a B series Tornado Ute. Specifically the tailgate FPV badge (Not the F6 Tornado badge), and the two FPV badges that sit in the left and right skirts in the recessed area near the front wheels. They are a two piece badge, one part is the FPV logo, the other is the text FPV.

Cheers.

[GTLEGEND]

Originally Posted by mchaggis

Hi GTLegend, I'm after the three FPV badges for a B series Tornado Ute. Specifically the tailgate FPV badge (Not the F6 Tornado badge), and the two FPV badges that sit in the left and right skirts in the recessed area near the front wheels. They are a two piece badge, one part is the FPV logo, the other is the text FPV.

Cheers.

Hi mate,

Tailgate and side FPV Badges in this case are all the same. Part number BAT16237A, obsolete but there is one on eBay.

https://www.ebay.com.au/itm/25576862...Bk9SR66irbSEYg

Cheers,
GT

[portokatsiki]

Hey legend
2007 territory turbo oxygen sensor price please if still available. Does it have 2 sensors like the v8s or 1?

Thanks

[GTLEGEND]

Originally Posted by portokatsiki

Hey legend
2007 territory turbo oxygen sensor price please if still available. Does it have 2 sensors like the v8s or 1?

Thanks

Hi mate,

2007 TT has only 1 O2 Hego Sensor. $270 plus postage if required.

GT

[au2000]

sorry GT Ledgend.. last one .. i promise ! 8169 to suit a GTE?

[GTLEGEND]

Originally Posted by au2000

sorry GT Ledgend.. last one .. i promise ! 8169 to suit a GTE?

No drama keep them coming. So GTE will have a Bright Chrome Finish, still available at $250 plus postage if required.