Genuine Ford Parts - Page 62

GTLEGEND · 12-02-2024, 11:17 AM

Quote:

Originally Posted by mad2

Hi GT. as promised a pic of BA/BF & SX/SY steering rack boots. aftermarket tho.

image

image

hope that helps someone out.

GTLegend - it 'appears' to be the rod.

cheers

Thanks,

But sometimes I dont trust aftermarket. Soemtimes they make two into one when they really should be two seperate parts.

Could be right but I would prefer to see genuine ones compared.

GT

phildee · 19-02-2024, 01:40 PM

Still possible to get the engine side of the filter fuel line for a BA XR8 ute? Nut is seized in the filter and rounded off.

Cheers, Phil

GTLEGEND · 19-02-2024, 09:04 PM

Quote:

Originally Posted by phildee

Still possible to get the engine side of the filter fuel line for a BA XR8 ute? Nut is seized in the filter and rounded off.

Cheers, Phil

Hey Phil,

Long gone, part number BA9289K if its any help..

GT

frankie86 · 20-02-2024, 01:52 PM

Hi GT, any of these left anywhere? BGF04178A

XR Martin · 20-02-2024, 08:26 PM

Quote:

Originally Posted by phildee

Still possible to get the engine side of the filter fuel line for a BA XR8 ute? Nut is seized in the filter and rounded off.

Cheers, Phil

Should be the same as every other BA Falcon? Unless the V8s are different?
But utes, sedans and wagons are all the same.

GTLEGEND · 20-02-2024, 08:56 PM

Quote:

Originally Posted by frankie86

Hi GT, any of these left anywhere? BGF04178A

No good all long gone!!

GTLEGEND · 20-02-2024, 09:10 PM

Quote:

Originally Posted by XR Martin

Should be the same as every other BA Falcon? Unless the V8s are different?
But utes, sedans and wagons are all the same.

Note quite, there were 4 different ones, below are the decriptions and part numbers. Basically for Falcon V8's and Utes Same, 4.0 Sedans and Wagons same.

BA9289A: ALL 4.0 ENGINES SWB SEDANS & WAGONS

BA9289K: ALL 5.4 V8 ENGINES SWB SEDANS AND ALL UTES (REGARDLESS OF ENGINE).

BF9289A: 4.0 FAIRLANE

BF9289K: FAIRLANE/FAIRLANE G220/FAIRLANE G8/LTD, 5.4 V8 SOHC EFI 24V

XR Martin · 20-02-2024, 09:30 PM

The one I pulled out of a wreck ute looked exactly the same as the one in my BA wagon, maybe I should double check k.

**mad2** · 20-02-2024, 10:21 PM

Hi Legend ....

wondering what you could tell me re what's in the pic. i have NO idea. Thanks

it's not easy finding 'inexpensive' FG ute diffs.....

anyway thanks for your time GTLEGEND

frankie86 · 22-02-2024, 06:22 AM

Hi GT sorry to bother you again, my sprint has broken 2 of these centre caps. ER2Z1130A, how much would I be looking at? Cheers

GTLEGEND · 22-02-2024, 12:07 PM

Quote:

Originally Posted by mad2

Hi Legend ....

wondering what you could tell me re what's in the pic. i have NO idea. Thanks

image

it's not easy finding 'inexpensive' FG ute diffs.....

anyway thanks for your time GTLEGEND

So its a solid axle diff housing, number does not come up in usual places so trying to see if I can pin point exactly what it is off. Leave it with me for a while.

GTLEGEND · 22-02-2024, 12:10 PM

Quote:

Originally Posted by frankie86

Hi GT sorry to bother you again, my sprint has broken 2 of these centre caps. ER2Z1130A, how much would I be looking at? Cheers

$55 each plus postage if required.

**mad2** · 22-02-2024, 03:35 PM

Quote:

Originally Posted by GTLEGEND

So its a solid axle diff housing, number does not come up in usual places so trying to see if I can pin point exactly what it is off. Leave it with me for a while.

don't worry about it GT .. someone mentioned what it was off. thanks tho

GTLEGEND · 22-02-2024, 08:51 PM

Quote:

Originally Posted by mad2

don't worry about it GT .. someone mentioned what it was off. thanks tho

Curious, I want to know now too..

**mad2** · 23-02-2024, 10:44 AM

Quote:

Originally Posted by GTLEGEND

Curious, I want to know now too..

will pm you latet

GTLEGEND · 24-02-2024, 08:17 AM

Quote:

Originally Posted by mad2

Hi Legend ....

wondering what you could tell me re what's in the pic. i have NO idea. Thanks

image

it's not easy finding 'inexpensive' FG ute diffs.....

anyway thanks for your time GTLEGEND

Found it eventually:

AXLE ASSY - REAR, WITH M78 SERIES AXLE, TAG ID:5R29/R* (UTILITY, ALL 4.0L N/A ENGINES (VCT), 3.23, REAR AXLE LESS LIMITED SLIP DIFF, 4 WHEEL ANTI-LOCK BRAKING SYSTEM) Built from 1/10/2005 on.

**mad2** · 24-02-2024, 08:25 AM

Quote:

Originally Posted by GTLEGEND

Found it eventually:

AXLE ASSY - REAR, WITH M78 SERIES AXLE, TAG ID:5R29/R* (UTILITY, ALL 4.0L N/A ENGINES (VCT), 3.23, REAR AXLE LESS LIMITED SLIP DIFF, 4 WHEEL ANTI-LOCK BRAKING SYSTEM) Built from 1/10/2005 on.

thanks GT.

yeah so it's not suitable for my project.

T3rminator · 28-02-2024, 10:39 AM

G'day GT, need your help please.

Do you have the fuel pressure regulator part number for the 5.4L 24v (Barra 220)?

Do you know if they are 3 BAR or 4 BAR?

Thanks!

GTLEGEND · 28-02-2024, 01:42 PM

Quote:

Originally Posted by T3rminator

G'day GT, need your help please.

Do you have the fuel pressure regulator part number for the 5.4L 24v (Barra 220)?

Do you know if they are 3 BAR or 4 BAR?

Thanks!

Hey mate,

Part number XR3Z9C968AA.

For the life of me I cannot find the spec, I can find 32V at 4 Bar, but the 24V is not listed??

GT

Magnum_dogholes · 04-03-2024, 12:01 AM

Hi GT I was recommended to ask you from another member, I'm in need to know how many chassis bolts that the BF falcon has in total? And also their length and head size? I've tried google but haven't had any luck, thanks in advance for any help 👍

GTLEGEND · 04-03-2024, 06:58 AM

Quote:

Originally Posted by Magnum_dogholes

Hi GT I was recommended to ask you from another member, I'm in need to know how many chassis bolts that the BF falcon has in total? And also their length and head size? I've tried google but haven't had any luck, thanks in advance for any help 👍

Hey mate,

Realistically there are no chassis bolts on a BF as it is a monocoque design with no chassis as such.

You need to be a bit more specific on which bolts you are referring to. I may be able to give quantities, but I doubt I could give length and head bot sizes, maybe some thread sizes but that's it.

GT

Magnum_dogholes · 04-03-2024, 11:46 AM

Makes sense why google had nothing either, thanks mate! A bloke was asking me in regards to getting a quote for a 1 or 2 inch lift on my bf sedan. I'm not sure if that helps? I believe he wants to put spacers of some sort of something to achieve this. In addition. You wouldn't happen to know the best way to achieve this? Thanks again mate

XR Martin · 04-03-2024, 01:26 PM

Quote:

Originally Posted by Magnum_dogholes

Makes sense why google had nothing either, thanks mate! A bloke was asking me in regards to getting a quote for a 1 or 2 inch lift on my bf sedan. I'm not sure if that helps? I believe he wants to put spacers of some sort of something to achieve this. In addition. You wouldn't happen to know the best way to achieve this? Thanks again mate

RTV front-end will give you a 70-80mm lift, bit it's a lot of work.
Not sure what you would do with the back-end on a sedan though.

1" is doable with just a thicker top spacer and taller springs.

**mad2** · 04-03-2024, 05:04 PM

Quote:

Originally Posted by GTLEGEND

Hey mate, SX SY SZ SZ2 AWD Guard badges are all the same and are still available $55 each plus postage.

Hi GT. just replying back re AWD badges. ended up buying 5 from Jefferson Ford.

Thanks tho.

GTLEGEND · 04-03-2024, 06:03 PM

Quote:

Originally Posted by Magnum_dogholes

Makes sense why google had nothing either, thanks mate! A bloke was asking me in regards to getting a quote for a 1 or 2 inch lift on my bf sedan. I'm not sure if that helps? I believe he wants to put spacers of some sort of something to achieve this. In addition. You wouldn't happen to know the best way to achieve this? Thanks again mate

I would be asking a suspension specialist on doing that modification, taller springs and shocks would be a possible start but that just opens a can of worms as to what else needs to be done. Drive shaft angles and other issues will surely arise. Not impossible, just be ready to tackle issue after unexpected issue.

GTLEGEND · 04-03-2024, 06:04 PM

Quote:

Originally Posted by mad2

Hi GT. just replying back re AWD badges. ended up buying 5 from Jefferson Ford.

Thanks tho.

All good, glad you got them.

glitchedfolx · 09-03-2024, 02:15 PM

Hey GT, chance you'd be able to help me find something?

Would you have any clue where I'd be able to buy both side mirrors for a Ghia variant BA Ford Fairmont without costing an arm and a leg.

I've searched almost every wrecker in town, and scrapped the internet trying to find working replacements, only thing I managed to find was an eBay listings for both, but it either costs too much or my standards are too high

Location Australia Wide doesn't matter as long as postage is available, and I'm willing to cover both product and postage.

Appreciate the help!.

Thanks!

GTLEGEND · 09-03-2024, 02:27 PM

Quote:

Originally Posted by glitchedfolx

Hey GT, chance you'd be able to help me find something?

Would you have any clue where I'd be able to buy both side mirrors for a Ghia variant BA Ford Fairmont without costing an arm and a leg.

I've searched almost every wrecker in town, and scrapped the internet trying to find working replacements, only thing I managed to find was an eBay listings for both, but it either costs too much or my standards are too high

Location Australia Wide doesn't matter as long as postage is available, and I'm willing to cover both product and postage.

Appreciate the help!.

Thanks!

Hi mate,

You need to be a bit mores specific. Do you mean the whole mirror assembly or certain components. Whats you budget and where are you located.

A VIN will help narrow dow the exact part number too.

GT

glitchedfolx · 09-03-2024, 02:36 PM

Quote:

Originally Posted by GTLEGEND

Hi mate,

You need to be a bit mores specific. Do you mean the whole mirror assembly or certain components. Whats you budget and where are you located.

A VIN will help narrow dow the exact part number too.

GT

I would probably say just replacing the entire assembly, since one mirror is held to the assembly by tape, and the other has snapped.

I'm located in WA, but buying parts from other states I'll be fine as long as I got postage. Budget I'd probably say around 300 total (150 each) before postage.

VIN: 6FPAAAJGSW3D50626

Hope this helps!

Bobman · 17-03-2024, 02:12 PM

So many Genuine parts are Made in China now, it's disappointing.

Even "Genuine" BA headlights as we know are made by TYC, with Ford stamped on the back. Terrible, cheap and nasty compared to the Hella ones.

SZ Territorys seemed to have considerably more Chinese Genuine Ford parts than SX/SY, e.g. floor mats, air con condenser. It's a real shame.