Genuine Ford Parts - Page 65

v1rus · 03-05-2024, 09:33 PM

Quote:

Originally Posted by GTLEGEND

For door moulds FG1 but you still did not advise what model as there are two different black ones.

I would need to check but for FGX I think only the LH B pillar upper trim in Shadow Grey is available.

sorry it's for a G6ET

GTLEGEND · 03-05-2024, 09:59 PM

Quote:

Originally Posted by v1rus

sorry it's for a G6ET

So G6ET should have a chrome plated insert, are you chasing the original style or changing to all black XR style?

v1rus · 03-05-2024, 10:19 PM

Quote:

Originally Posted by GTLEGEND

So G6ET should have a chrome plated insert, are you chasing the original style or changing to all black XR style?

Just checked the door moulds should all be the same on MK1/2 in black.

They fade over time and buffing is a temporary fix.

The chrome bits you are probably thinking about is the chrome windows seal/trims along the bottom. G6ET are chrome XR are black.

GTLEGEND · 03-05-2024, 10:25 PM

Quote:

Originally Posted by v1rus

Just checked the door moulds should all be the same on MK1/2 in black.

They fade over time and buffing is a temporary fix.

The chrome bits you are probably thinking about is the chrome windows seal/trims along the bottom. G6ET are chrome XR are black.

I asked if these were the moulds were the ones on the door at the bottom of the glass, you said yes which on G6ET are chrome. These which moulds are you referring to. Add a pic so we can ensure we are both taking about the same part.

Noob · 03-05-2024, 10:40 PM

Is it still possible to get 2016 Sprint wheels?

GTLEGEND · 03-05-2024, 10:50 PM

Quote:

Originally Posted by Noob

Is it still possible to get 2016 Sprint wheels?

Yes, but not cheap at around $1k per corner..

v1rus · 03-05-2024, 11:13 PM

Quote:

Originally Posted by GTLEGEND

Add a pic so we can ensure we are both taking about the same part.

GTLEGEND · 04-05-2024, 07:46 AM

Quote:

Originally Posted by v1rus

image

Ahh ok B pillar moulds/trims. They are all the same reagrdless of model.

Can get RHF $80, LHF $124, RHR $65, LHR $120. Plus postage.

As for the FGX top B pillar trim, can only get the LH $80 plus postage.

Cheers,
GT

v1rus · 04-05-2024, 10:28 AM

Hi GT, Send you a PM.

That was Melbourne by the way

ArchonXR6 · 08-05-2024, 11:24 AM

I'm after these wheels for my 2012 FG MkII XR6. I already have one new wheel so would ideally like to find another three new ones. I can't find any available online and narrowly missed out on a new set of four a few weeks ago. Part number is AR2Z1007CA.

. Hoping you can help!

GTLEGEND · 08-05-2024, 07:00 PM

Quote:

Originally Posted by ArchonXR6

I'm after these wheels for my 2012 FG MkII XR6. I already have one new wheel so would ideally like to find another three new ones. I can't find any available online and narrowly missed out on a new set of four a few weeks ago. Part number is AR2Z1007CA. image. Hoping you can help!

Found these:

https://carpartsshop.com.au/products...007ca-for-ford

ArchonXR6 · 08-05-2024, 08:43 PM

Quote:

Originally Posted by GTLEGEND

Found these:

https://carpartsshop.com.au/products...007ca-for-ford

Unfortunately that ad is a lie. I have already asked them and they are sold out, as are Smart Replacement Parts.

GTLEGEND · 08-05-2024, 09:21 PM

Quote:

Originally Posted by ArchonXR6

Unfortunately that ad is a lie. I have already asked them and they are sold out, as are Smart Replacement Parts.

Something with that seller, everytime someone wants something it is advertised but not in stock..

Ill keep an eye out on the wheels for you, they are obsolete through Ford.

ArchonXR6 · 08-05-2024, 09:35 PM

Quote:

Originally Posted by GTLEGEND

Something with that seller, everytime someone wants something it is advertised but not in stock..

Ill keep an eye out on the wheels for you, they are obsolete through Ford.

Thanks so much mate. Have tried all my usual places and I have come up with nothing. Gotta be some out there somewhere.

GTLEGEND · 09-05-2024, 06:19 AM

Quote:

Originally Posted by ArchonXR6

Thanks so much mate. Have tried all my usual places and I have come up with nothing. Gotta be some out there somewhere.

Keep an eye out on Market Place, FB and eBay, their your best bet, or ask on FG dedicated FB page..

ArchonXR6 · 09-05-2024, 10:01 AM

Looking for the windshield washer jet nozzles for FG Falcon MkII. The part numbers are:

LH: BG17B671B
RH: BG17B671A

Cheers,

Glen

GTLEGEND · 09-05-2024, 10:28 AM

Quote:

Originally Posted by ArchonXR6

Looking for the windshield washer jet nozzles for FG Falcon MkII. The part numbers are:

LH: BG17B671B
RH: BG17B671A

Cheers,

Glen

Hey Glen,

Obsolete and no longer available either. Look in all the other places but very hard to find.

liamde · 10-05-2024, 03:41 PM

Hey GT,

Chasing the RHF Drivers floor mat for an FGX XR6.

P/N ER2Z541308DBYW. (Shadow Grey)

NLA through official channels, and couldn't find anything via eBay etc.

Cheers,

GTLEGEND · 10-05-2024, 03:51 PM

Quote:

Originally Posted by liamde

Hey GT,

Chasing the RHF Drivers floor mat for an FGX XR6.

P/N ER2Z541308DBYW. (Shadow Grey)

NLA through official channels, and couldn't find anything via eBay etc.

Cheers,

All gone mate, good luck, keep searching on eBay, FB etc etc

liamde · 10-05-2024, 04:00 PM

Quote:

Originally Posted by GTLEGEND

All gone mate, good luck, keep searching on eBay, FB etc etc

No worries, appreciate the quick reply, figured as much.

Cheers !!

gpierce · 13-05-2024, 12:56 PM

Hi GT. Can you get any 8R2Z-7277-A?

Thnx!!!

GTLEGEND · 13-05-2024, 04:48 PM

Quote:

Originally Posted by gpierce

Hi GT. Can you get any 8R2Z-7277-A?

Thnx!!!

Yes I can $180 plus postage.

78xcgxl · 18-05-2024, 10:20 AM

Hi GT, can you get any BAF215A417WA (wagon trailer harness with rear sensors) Thanks

GTLEGEND · 19-05-2024, 07:24 PM

Quote:

Originally Posted by 78xcgxl

Hi GT, can you get any BAF215A417WA (wagon trailer harness with rear sensors) Thanks

Sorry no good, long gone..

**mad2** · 22-05-2024, 06:25 PM

Quote:

Originally Posted by 78xcgxl

Hi GT, can you get any BAF215A417WA (wagon trailer harness with rear sensors) Thanks

GT - is that the stand alone system as were fitted to some wagons & Territories less trailer wiring? ebay Territory only asking as i have some wagon reverse sensors and they look very similar to the link.

GTLEGEND · 22-05-2024, 08:21 PM

Quote:

Originally Posted by mad2

GT - is that the stand alone system as were fitted to some wagons & Territories less trailer wiring? ebay Territory only asking as i have some wagon reverse sensors and they look very similar to the link.

Sorry mate, I really dont understand the question??

**mad2** · 23-05-2024, 11:59 AM

Quote:

Originally Posted by GTLEGEND

Sorry mate, I really dont understand the question??

sorry. was wondering if the wagon reverse sensor/trailer wiring loom was same/similar to what i linked. re question asked by previous member.

2muchkw · 23-05-2024, 05:36 PM

Hi GT,
Are you able to source a Genuine Ford LHS FGX XR8 Headlamp for me?
My local ford dealer says none available/currently on backorder with no ETA listed! Is it possible to see if any Genuine Ford Spare Parts Dealers within Australia would have one in stock without calling every individual dealer?
Any help greatly appreciated.

GTLEGEND · 23-05-2024, 08:37 PM

Quote:

Originally Posted by 2muchkw

Hi GT,
Are you able to source a Genuine Ford LHS FGX XR8 Headlamp for me?
My local ford dealer says none available/currently on backorder with no ETA listed! Is it possible to see if any Genuine Ford Spare Parts Dealers within Australia would have one in stock without calling every individual dealer?
Any help greatly appreciated.

I would need a VIN to confirmpart number..

78xcgxl · 26-05-2024, 08:25 PM

Quote:

Originally Posted by mad2

sorry. was wondering if the wagon reverse sensor/trailer wiring loom was same/similar to what i linked. re question asked by previous member.

Wagon loom is different. I have both. They are similar but the looms are different. The actual sensors are the same but. With a wagon you also need the special trailer plug loom to suit the parking sensors. This is what i don't have and will have to try and source one off a wreck.