Genuine Ford Parts

[GTLEGEND]

Originally Posted by mad2

Hi Legend.
another quick question for you. is there any differance between the replacement fuel pumps re sedan/ute/wagon?. just the pump. and yes most likely obsolete too.


Thank you.

Hey mate,

What car(s)?

[GTLEGEND]

Rear diff drain plug UH7126051: Can get $30..

[DJM83]

Originally Posted by GTLEGEND

Had a part number of BA3A006A, but long obsolete now.

Need to search the usual places..

Thanks mate.
Would one from an earlier falcon work, like this one.
https://www.ebay.com.au/itm/15468532...3Avlp_homepage

[GTLEGEND]

Originally Posted by DJM83

Thanks mate.
Would one from an earlier falcon work, like this one.
https://www.ebay.com.au/itm/15468532...3Avlp_homepage

I would say no as they had the different power steer pump, I would say you would need one from BA to FGX..

[mad2]

Originally Posted by GTLEGEND

Hey mate,

What car(s)?

ohh - sorry umm.. BA? [don't think the BF would be any differant?]


Thanks

[GTLEGEND]

Originally Posted by mad2

ohh - sorry umm.. BA? [don't think the BF would be any differant?]


Thanks

So here are all the combinations of fuel pumps, remember they are a module so from Ford they only came complete, you could not just buy the pump separately from the rest of the module.

Falcon/Fairlane/LTD Sedans.

7/2002 to 9/2007

BA9350A: PUMP ASSY - FUEL, FUEL TANK PUMP/SENDER UNIT (4.0L DOHC VCT EFI OR 5.4 V8 SOHC EFI 24V)

BAT9350A: PUMP ASSY - FUEL, FUEL TANK PUMP/SENDER UNIT (5.4 V8 DOHC EFI 32V OR ALL 4.0 TURBO PETROL ENGINES)

10/2007-

BAF29350A: PUMP ASSY - FUEL (4.0L DOHC VCT EFI OR 5.4 V8 SOHC EFI 24V)

BAF29350B: PUMP ASSY - FUEL (ALL 4.0 TURBO PETROL ENGINES OR 5.4 V8 DOHC EFI 32V)

All Wagons:

BA9350B: PUMP ASSY - FUEL, FUEL TANK PUMP/SENDER UNIT

Utes

7/2002-8/2007

BAC9350C: PUMP ASSY - FUEL, FUEL TANK PUMP/SENDER UNIT (4.0L DOHC VCT EFI)

BACT9350A: PUMP ASSY - FUEL, FUEL TANK PUMP/SENDER UNIT (ALL 4.0 TURBO PETROL ENGINES OR 5.4 V8 DOHC EFI 32V OR 5.4 V8 SOHC EFI 24V)

9/2007 on

AR2Z9350BA: PUMP ASSY - FUEL (ALL 4.0 TURBO PETROL ENGINES OR 5.4 V8 DOHC EFI 32V)

BAFC29350A: PUMP ASSY - FUEL (4.0L DOHC VCT EFI OR 5.4 V8 SOHC EFI 24V)

[mad2]

Many Thanks you Legend

[bondy99]

GT,
I've been trying to find out what the part number of the Supply Tank Hose that goes to the radiator, whether it's still available and do you have an image of it?

Reason I ask is mine needs replacement.

I checked Mackay Rubber and they list a completey different hose that shows a straight hose with a upward bend on both ends.

The hose in my vehicle has only one bend.

Vehicle in question
AU2 6 cylinder year 2000.

Thanks

[GTLEGEND]

Originally Posted by bondy99

GT,
I've been trying to find out what the part number of the Supply Tank Hose that goes to the radiator, whether it's still available and do you have an image of it?

Reason I ask is mine needs replacement.

I checked Mackay Rubber and they list a completey different hose that shows a straight hose with a upward bend on both ends.

The hose in my vehicle has only one bend.

Vehicle in question
AU2 6 cylinder year 2000.

Thanks

Hey Bondy,

I guess your talking about the large hose that goes from under the resevoir to the radiator, not one of the other two skinnier hoses.

If it is then I only have a pic from the catalogue,it has a part number of ER8A365AMC. May be able to source you one, but would need to confirm.

Let me know if you want me to chase.

GT

[gonads]

Howdy GTL. I'm after a set of 4 pot rear Brembo calipers (from the Premium brake package) to suit an FG, including the mounting brackets and lines if possible. I've seen a couple of sets floating around but I didn't act quick enough or can't drive halfway across the country to pick them up. If figure if anyone can find them, you're the man.

Thanks,
Ben

[GTLEGEND]

Originally Posted by gonads

Howdy GTL. I'm after a set of 4 pot rear Brembo calipers (from the Premium brake package) to suit an FG, including the mounting brackets and lines if possible. I've seen a couple of sets floating around but I didn't act quick enough or can't drive halfway across the country to pick them up. If figure if anyone can find them, you're the man.

Thanks,
Ben

Hey Ben,

New or used?

I am sure the rear bracket is part of the caliper and bolts straight to the rear hub.

GT

[Citroënbender]

Thanks again, for another prompt and personalised delivery!

[mad2]

Originally Posted by Citroënbender

Thanks again, for another prompt and personalised delivery!

Thank you Legend and Mr. Bender

[GTLEGEND]

Originally Posted by Citroënbender

Thanks again, for another prompt and personalised delivery!

No problem, happy to help where possible!

[GTLEGEND]

Originally Posted by mad2

Thank you Legend and Mr. Bender

Thanks for taking it off my hands lol..this one took up a bit of space!

[mad2]

Originally Posted by GTLEGEND

Thanks for taking it off my hands lol..this one took up a bit of space!

if i had of known who's whom ...... i 'might' have asked earlier

but thanks for your help

[gonads]

Originally Posted by GTLEGEND

Hey Ben,

New or used?

I am sure the rear bracket is part of the caliper and bolts straight to the rear hub.

GT

I think the Brembo 4 pot Caliper is a generic unit with a Brembo-branded, alloy-coloured adapter bracket to suit the rear knuckle assembly. I could be wrong, but I’m pretty confident the Caliper is red and the bracket is a silver colour.

I’d prefer new, but 2nd hand would be ok if new isn’t an option. I can dig up some part numbers tomorrow if it helps.

Thanks mate,
Ben
EDIT: Yes, the bracket is part of the assembly and is usually included with the Ford part number. I’ll get it to you asap.

[GTLEGEND]

Originally Posted by gonads

I think the Brembo 4 pot Caliper is a generic unit with a Brembo-branded, alloy-coloured adapter bracket to suit the rear knuckle assembly. I could be wrong, but I’m pretty confident the Caliper is red and the bracket is a silver colour.

I’d prefer new, but 2nd hand would be ok if new isn’t an option. I can dig up some part numbers tomorrow if it helps.

Thanks mate,
Ben
EDIT: Yes, the bracket is part of the assembly and is usually included with the Ford part number. I’ll get it to you asap.

Hey Ben,

I can get the Genuine Ford Brembo Rear calipers for FG for around $1100 each side plus postage.

From what I can tell, there is nothing else you need as they come with the brake line and pads, that is unless you need mounting bolts as the bracket is part of the caliper.

Let me know if you want me to source.

GT

[bondy99]

Originally Posted by GTLEGEND

Hey Bondy,

I guess your talking about the large hose that goes from under the resevoir to the radiator, not one of the other two skinnier hoses.

If it is then I only have a pic from the catalogue,it has a part number of ER8A365AMC. May be able to source you one, but would need to confirm.

Let me know if you want me to chase.

GT

Hi GT,
Yep, that's the one. it goes from under the reservoir to the radiator. Let me know if its still available and cost thanks.
Bondy

[GTLEGEND]

Originally Posted by bondy99

Hi GT,
Yep, that's the one. it goes from under the reservoir to the radiator. Let me know if its still available and cost thanks.
Bondy

Still available $60 plus freight..

[galaxy xr8]

Hi GT,

Just a query on a SZII Territory Titanium 2016.
Are the indicator lenses/clear cover on the LH side mirror available to purchase separately ?

or do you have to purchase the whole mirror assembly ?

Regards,

[GTLEGEND]

Originally Posted by galaxy xr8

Hi GT,

Just a query on a SZII Territory Titanium 2016.
Are the indicator lenses/clear cover on the LH side mirror available to purchase separately ?

or do you have to purchase the whole mirror assembly ?

Regards,

Hey mate,

Well originally you could buy the lens seperately (part number 9R7Z13B383BA) how ever that part has become obsolete and you have to buy the whole mirror assembly. Would need to confirm exactly, but the mirror assembly is around the $400 mark. If you want me to chase one for you with a definte price, let me know.

Cheers,
GT

[galaxy xr8]

Originally Posted by GTLEGEND

Hey mate,

Well originally you could buy the lens seperately (part number 9R7Z13B383BA) how ever that part has become obsolete and you have to buy the whole mirror assembly. Would need to confirm exactly, but the mirror assembly is around the $400 mark. If you want me to chase one for you with a definte price, let me know.

Cheers,
GT

Thanks mate, I'll sit on it for now and let you know in the future if I head in that direction.
Cheers.

[GTLEGEND]

Originally Posted by galaxy xr8

Thanks mate, I'll sit on it for now and let you know in the future if I head in that direction.
Cheers.

No worries, dont leave your run too late as there is only a limited number of those left too!

[bondy99]

Originally Posted by GTLEGEND

Still available $60 plus freight..

Thanks GT,
Send me a pm with details.

Cheers

[crmpicco]

I’m chasing a couple of parts for a 2013 Ford Falcon FG MK2.

Windscreen washer bottle

Power steering hose

I’m wondering if GTLEGEND still has access to parts and what the cost of both would be to ship to WA.

[GTLEGEND]

Originally Posted by crmpicco

I’m chasing a couple of parts for a 2013 Ford Falcon FG MK2.

Windscreen washer bottle

Power steering hose

I’m wondering if GTLEGEND still has access to parts and what the cost of both would be to ship to WA.

Windscreen washer bottle is obsolete, I would need to see if I can track one down.

As for the power steering hose, you need to be a bit more specific, return or supply hose, what sort of Falcon is it, 2.0,4.0 or 5.0. A VIN would help but not essential if you can provide specific information. There are a few variations.

[crmpicco]

Originally Posted by GTLEGEND

Windscreen washer bottle is obsolete, I would need to see if I can track one down.

As for the power steering hose, you need to be a bit more specific, return or supply hose, what sort of Falcon is it, 2.0,4.0 or 5.0. A VIN would help but not essential if you can provide specific information. There are a few variations.

Would this one fit my Falcon? By the looks of it, it would but I noticed the part is listed as “Ute”.

https://www.ebay.com.au/itm/33511133...mis&media=COPY

The VIN is 6FPAAAJGSWDU24780

[crmpicco]

Originally Posted by GTLEGEND

Windscreen washer bottle is obsolete, I would need to see if I can track one down.

As for the power steering hose, you need to be a bit more specific, return or supply hose, what sort of Falcon is it, 2.0,4.0 or 5.0. A VIN would help but not essential if you can provide specific information. There are a few variations.

Hi again mate, it’s a 4.0 L Falcon FG MK2 XR6 and it’s the pressure hose which I understand to be the pricey one. I have called the local Ford dealership here in Rockingham and they have said there is no availability showing and they will need to contact their distributor up in Welshpool near Perth.

Do you have any availability of this part?

[GTLEGEND]

Originally Posted by crmpicco

Would this one fit my Falcon? By the looks of it, it would but I noticed the part is listed as “Ute”.

https://www.ebay.com.au/itm/33511133...mis&media=COPY

The VIN is 6FPAAAJGSWDU24780

Sedan and ute have the same bottle, how ever FG1 is different to FG2 and FGX (the later 2 are the same) so if it is an FG1 style it wont fit your car being an FG2.