Genuine Ford Parts - Page 8

bforrester · 19-03-2021, 04:09 AM

Quote:

Originally Posted by GTLEGEND

The catalogue has them described as Water Splash Shields. If its any help the RHF had a part number of BAF237A04B for a vehicle built after 1/1/2005 and the LHF BAF237A05B. Earlier BA's had a different part number being they are the same as I just mentioned but ended in a A not a B as a suffix for vehicles built between 1/7/2002 and 31/12/2004.

Try these places in Sydney:

http://www.fairfordspares.com/

https://www.facebook.com/mrfordsparesptyltd/

GT

Thanks for the info ill give them a try

GTLEGEND · 19-03-2021, 05:56 PM

FGX G6E Front Bar Components.

FGX G6E Front Bar.JPG

FGX Front Guard Components

FGX Front Guard.JPG

irvinnie · 19-03-2021, 06:01 PM

Hi GTlegend

That HS2 bolt is what attaches the bar to the front guard but it isn’t showing what it screws into. Perhaps it might be part of the front guard diagram?

Appreciate your help

GTLEGEND · 19-03-2021, 06:03 PM

Quote:

Originally Posted by irvinnie

Hi GTlegend

That HS2 bolt is what attaches the bar to the front guard but it isn’t showing what it screws into. Perhaps it might be part of the front guard diagram?

Appreciate your help

Just added guard parts to my post.

irvinnie · 19-03-2021, 06:10 PM

Thank you. Looks like it may be 17F942. Can you confirm that it’s a push in screw grommet piece for me?

GTLEGEND · 19-03-2021, 06:26 PM

Quote:

Originally Posted by irvinnie

Thank you. Looks like it may be 17F942. Can you confirm that it’s a push in screw grommet piece for me?

Description states: RETAINER - MOULDING, RH/LH, ATTACHES BUMPER COVER TO REINFORCEMENT.

Unfortunately I don't have an image of it at the moment, could try and get one on Monday if need be.

irvinnie · 19-03-2021, 06:40 PM

Quote:

Originally Posted by GTLEGEND

Description states: RETAINER - MOULDING, RH/LH, ATTACHES BUMPER COVER TO REINFORCEMENT.

Unfortunately I don't have an image of it at the moment, could try and get one on Monday if need be.

Sounds like the part. Will go visit my local dealer. Appreciate your assistance

GTLEGEND · 19-03-2021, 06:45 PM

Quote:

Originally Posted by irvinnie

Sounds like the part. Will go visit my local dealer. Appreciate your assistance

Full part number is BG17F942B, that is what you need to quote..around $6 each.

PRO-GT · 20-03-2021, 10:40 PM

Hey mate, do ford still stock the decal that goes on the underside of the bonnet for a BA/BF 6 cylinder turbo?
I believe it was a belt diagram or emissions decal but not entirely sure.
Thanks!

**Linz** · 21-03-2021, 02:07 AM

Quote:

Originally Posted by PRO-GT

Hey mate, do ford still stock the decal that goes on the underside of the bonnet for a BA/BF 6 cylinder turbo?
I believe it was a belt diagram or emissions decal but not entirely sure.
Thanks!

Check this out from George's build thread mate...http://www.fordforums.com.au/showpos...postcount=2713

GTLEGEND · 21-03-2021, 10:10 AM

Quote:

Originally Posted by PRO-GT

Hey mate, do ford still stock the decal that goes on the underside of the bonnet for a BA/BF 6 cylinder turbo?
I believe it was a belt diagram or emissions decal but not entirely sure.
Thanks!

There were two pending on build date for 6 cyl: 1/7/2002 to 30/9/2005 used BA29C485B then 1/10/2005-20/9/2006 used BAF9C485A. BF Vehicles built from 1/10/2006 did not have one as they were stopped being fitted in production.

No longer available from Ford, but places Grafix Unlimited might have reproduction ones.

PRO-GT · 21-03-2021, 04:26 PM

Thanks for the info guys. Mine is June 2006 so would have had the latter from factory. Thanks again!

JasonACT · 21-03-2021, 06:35 PM

I somehow scratched my glove box exterior, so I replaced it with a new one, but that didn't come with the sticker...

I'm mostly posting this (with the uploaded image) so I can print one from work, but I'd be interested in knowing if you can still buy them, and for how much?

(Yeah, I know, that bottom right corner is just so ready to pull!)

PRO-GT · 21-03-2021, 09:18 PM

Where does that decal sit exactly?
Only for car’s with towbars I assume or all models?

GTLEGEND · 21-03-2021, 10:01 PM

Quote:

Originally Posted by JasonACT

I somehow scratched my glove box exterior, so I replaced it with a new one, but that didn't come with the sticker...

image

I'm mostly posting this (with the uploaded image) so I can print one from work, but I'd be interested in knowing if you can still buy them, and for how much?

(Yeah, I know, that bottom right corner is just so ready to pull!)

Yes you can still buy them at around $10 each..

GTLEGEND · 21-03-2021, 10:16 PM

Quote:

Originally Posted by PRO-GT

Where does that decal sit exactly?
Only for car’s with towbars I assume or all models?

Tyre Placard is a must for all models, it just so happens that on these models they have the tow rating as well. On this model it is stuck to the inside of the glove box lid.

PRO-GT · 22-03-2021, 06:50 AM

Quote:

Originally Posted by GTLEGEND

Tyre Placard is a must for all models, it just so happens that on these models they have the tow rating as well. On this model it is stuck to the inside of the glove box lid.

Thanks for the info.
If still available I will grab a couple please.
Mine is missing!

GTLEGEND · 22-03-2021, 07:01 PM

Quote:

Originally Posted by PRO-GT

Thanks for the info.
If still available I will grab a couple please.
Mine is missing!

You will need to be a bit more specific on what vehicle you have (maybe supply a VIN) as in FG1 alone there around 12 different decals depending on model etc. Assuming yours is also an FG1 2008-2011, otherwise will need to check availability.

The image below is very specific to that vehicle, so you may need a different one. Would not want to supply you the wrong one for your car. Once verified, I can update the availability and price if need be.

PRO-GT · 22-03-2021, 07:21 PM

Bf series 1 F6 typhoon.
Can send you my vin via text message.
Thanks!

GTLEGEND · 22-03-2021, 07:47 PM

Quote:

Originally Posted by PRO-GT

Bf series 1 F6 typhoon.
Can send you my vin via text message.
Thanks!

Well on a BF the tyre placard is located on the drivers door below the lock catch not in the glove box lid, so you might want to check that first and see if its there. If I am correct the one you need is obsolete, but would need a VIN to confirm.

mannyb · 23-03-2021, 12:56 PM

I am looking for a replacement headliner for a BA 2003 GTP, trim code B3 FT AX - would you have any hope in finding one. Can find heaps for XR's and falcons but they're a different colour.

Manny

GTLEGEND · 23-03-2021, 06:10 PM

Quote:

Originally Posted by mannyb

I am looking for a replacement headliner for a BA 2003 GTP, trim code B3 FT AX - would you have any hope in finding one. Can find heaps for XR's and falcons but they're a different colour.

Manny

Hi Manny,

New or used?

With or without Sunroof?

With or without roof console/sunglass holder?

GT

JAZSXY · 23-03-2021, 06:19 PM

Can you still get any EB parts NOS? Needing the engine bay and boot lid stickers.

GTLEGEND · 23-03-2021, 06:32 PM

Quote:

Originally Posted by JAZSXY

Can you still get any EB parts NOS? Needing the engine bay and boot lid stickers.

Can get some EB parts NOS but the range is getting very limited now.

You need to be more specific on the model EB, 6 or V8. CFI or EFI etc. List the decal in detail ie, emissions, drive belt, jack etc to make it easier to look up.

matty88 · 23-03-2021, 09:09 PM

2011 Focus Titanium RHF seat base plastic, where the seat switches live. Anything available?

GTLEGEND · 23-03-2021, 10:26 PM

Quote:

Originally Posted by matty88

2011 Focus Titanium RHF seat base plastic, where the seat switches live. Anything available?

Will need a VIN as there are a couple of different types available base don exact build month/year and models.

JAZSXY · 24-03-2021, 12:27 PM

Quote:

Originally Posted by GTLEGEND

Can get some EB parts NOS but the range is getting very limited now.

You need to be more specific on the model EB, 6 or V8. CFI or EFI etc. List the decal in detail ie, emissions, drive belt, jack etc to make it easier to look up.

1992 Ford EB XR6, EFI.

Engine Bay, Drivebelt, emissions stickers.
Boot: Bootlide Jack Sticker.

Cheers
Jarrod

matty88 · 24-03-2021, 06:49 PM

Quote:

Originally Posted by gtlegend

will need a vin as there are a couple of different types available base don exact build month/year and models.

wf0kxxgcbkbj39759

GTLEGEND · 24-03-2021, 10:58 PM

Quote:

Originally Posted by JAZSXY

1992 Ford EB XR6, EFI.

Engine Bay, Drivebelt, emissions stickers.
Boot: Bootlide Jack Sticker.

Cheers
Jarrod

Hi Jarrod,

No luck on original decals, but you can get reproduction ones from the place below.

https://www.grafixunlimited.com.au/f...a_bf_xg_xh/eb/

Cheers,
GT

GTLEGEND · 24-03-2021, 11:06 PM

Quote:

Originally Posted by matty88

wf0kxxgcbkbj39759

Thanks,

You will have to leave this one with me for a couple of days. No stock showing, but could possibly some coming in. I need to confirm and let you know.