|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
05-01-2010, 09:28 AM
|
#1 | ||
|
RIP...
Join Date: Dec 2004
Posts: 15,524
|
Attention all you AU door lock ex-spurts......
We have a AU2 poverty pack ute with intermittent door lock problems. Doors will be locked only to open at any time between virtually straight away, to perhaps 2 days, by themselves. We've replaced both door actuators and had a reasonable glance for any suspect wiring. It is possible the replaced actuators are also bunk because they were second hand. An auto sparky guru we've spoke to suspects it's the BCM, of which I'm not convinced. Any ideas?
__________________
. Oval Everywhere... |
||
|
|
|
05-01-2010, 12:00 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Sep 2009
Location: Brisbane, Qld
Posts: 683
|
Can you disconnect one of the actuators and lock both and see if it will unlock the connected actuator ?
__________________
AU XLS. |
||
|
|
|
|
06-01-2010, 11:47 AM
|
#3 | ||
|
RIP...
Join Date: Dec 2004
Posts: 15,524
|
In the process of trying that now, will report back in a few days.
Any other ideas?
__________________
. Oval Everywhere... |
||
|
|
|
|
11-06-2014, 07:37 PM
|
#4 | ||
|
RIP...
Join Date: Dec 2004
Posts: 15,524
|
Bit of a thread mine, but also closure.
This ended up being water leaking on the loom in the drivers footwell. Spraying WD40 and unplugging/plugging the connector several times solved the problem. Obviously fixing the water leak helped too...
__________________
. Oval Everywhere... |
||
|
|
|
Door lock issues
Linear Mode
