Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Laser and Telstar

Reply
 
Thread Tools Display Modes
Old 04-10-2007, 05:16 PM   #1
rsrocket
Starter Motor
 
Join Date: Oct 2007
Posts: 1
Default KF Laser cutting out

Hi guys, sorry if this seems long winded but i will give you all the info i can...
About two weeks ago my car shut down for no reason. I was doing around 80 and my revs dropped from 3,000 to 0 instantly. I tried to restart unsuccessfully, but after about three minutes it started again and was fine. This has progressively become more frequent to the point where now, every time i drive the car after it has sat for more than two hours it will happen again. The symptoms are exactly the same every time. After 3 to 5 minutes of driving after the first start the car will shut down. The revs drop to 0 and there is no drive, but the car does not actually stall until it comes to a stop. After anywhere between 3 to 8 minutes the car will restart and it will then be fine for as long as i drive it. In that period of trying to restart the engine will turn but will not fire up. It is obviously an electrical problem of some sort, but my question is what?? Is there a sensor or something which could be responsible for these symptoms?? The car is a 1990 kf 1.8 injected sedan. Any help would be greatly appreciated.

rsrocket is offline   Reply With Quote Multi-Quote with this Post
Old 04-10-2007, 06:16 PM   #2
dirty hands
Over Thinker
 
dirty hands's Avatar
 
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
Default

any of these
dissy module -
the engine computer controller for the EFI -
coil -
fuel pump
__________________
My car goes Brumm Brumm
dirty hands is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 10:34 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL