|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
01-06-2018, 05:46 PM
|
#1 | ||
|
diesel
Join Date: Feb 2016
Posts: 8
|
My 2011 Focus LW Diesel is heavy on the steering on engine start up. It loosens up after 20 seconds or so but can be quite frightening if I pull away straight after engine fires. Steering is as heavy as if the engine is off and there's no assistance to the steering. I'm pretty sure these have electric assisted steering but I'm not sure. Any clues anyone. Would be greatly appreciated.
|
||
|
|
|
02-06-2018, 08:47 AM
|
#2 | ||
|
Chairman & Administrator
  
Join Date: Dec 2004
Location: 1975
Posts: 107,288
|
Yes it is an electric power steering system. It sounds a bit like the GEM is not providing an engine status signal to the EPS system and it is therefore having a slight delay while it gets the information from the PCM instead.
Cheers Russ
__________________
 Observatio Facta Rotae
|
||
|
|
|
|
02-06-2018, 01:33 PM
|
#3 | ||
|
diesel
Join Date: Feb 2016
Posts: 8
|
Thanks RussellW. Very helpful. Could you tell me please if you think my OBD11 code reader should pick this up? I've tried with no code showing. Also what part do I need to replace to rectify this?
Thanks |
||
|
|
|
|
02-06-2018, 02:13 PM
|
#4 | ||
|
Chairman & Administrator
Join Date: Dec 2004
Location: 1975
Posts: 107,288
|
Probably won't as I'm not sure they can all read the subsidiary modules like GEM. Might be worthwhile getting a full scan done at Supercheap or your dealer as in the absence of DTC's it's a lot of guesswork.
Cheers Russ
__________________
Observatio Facta Rotae
|
||
|
|
|
|
02-06-2018, 02:30 PM
|
#5 | ||
|
diesel
Join Date: Feb 2016
Posts: 8
|
Thanks again RussellW. Good tip to get a full scan. Shall do. Great support from the forum for those of us who are doin' it for themselves, when we can. Cheers FD
PS..Don't know if you went to Motorex 2018 last week but Fords were out in strength at the show. Go Blue Oval. |
||
|
|
|
Focus steering heavy on start up
Linear Mode
