![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 | ||
Starter Motor
Join Date: Aug 2014
Posts: 3
|
Hi guys this is my first post on here and I'm the new owner of a au falcon ute xl 2001 .
I got the ute with a transmission fault!!!!! (But it was cheap). So first question: what could be the problem????? It drives but clunks and jumps in and out of gear and slips... Ive topped the transmission oil up but that didn't work so apart from new box what else could it be???? Any advise would be great guys witty |
||
![]() |
![]() ![]() |
![]() |
#2 | |||
You can't stop the signal
Join Date: Nov 2005
Location: Behind a computer at work
Posts: 1,624
|
I assume it is an auto?
Only option is the gearbox is at fault. Try changing the filter and fluid, then flush as per this guide and run it for a bit. http://www.fordforums.com.au/vbporta...articleid=1210 My new AU was doing the same and I'm on the second flush/run and it's calmed down a lot. Also ensure you've got the right fluid. DO NOT put dex 3 in it. Cheers
__________________
Quote:
|
|||
![]() |
![]() ![]() |
![]() |
#3 | |||
FF.Com.Au Hardcore
Join Date: Apr 2012
Location: Adelaide
Posts: 2,802
|
Quote:
|
|||
![]() |
![]() ![]() |
![]() |
#4 | |||
You can't stop the signal
Join Date: Nov 2005
Location: Behind a computer at work
Posts: 1,624
|
I'm going off what I've read in these forums, where dex 3 effectively turns to sludge in these gearboxes.
Judging by what came out of my auto i would believe it. It was far from pretty. TQ-95 is correct fluid
__________________
Quote:
|
|||
![]() |
![]() ![]() |
![]() |
#5 | ||
FG XR50 TURBO
![]() Join Date: Apr 2009
Location: reservoir
Posts: 4,536
|
could be one of the solenoids ??
|
||
![]() |
![]() ![]() |
![]() |
#6 | |||
FG XR6 Ute & Sedan
![]() Join Date: Oct 2006
Location: Bibra Lake WA
Posts: 23,026
|
Yes TQ 95 or equivalents only see http://www.oilman.com.au/wp-content/...ison-Chart.pdf for equivalents. There is a conversion additive that allows Dexron III to be used see http://www.lubegard.com/~/C-179/LUBE...ersion+Formula but as TQ95 is readily available its is better to use that.
Quote:
__________________
regards Blue |
|||
![]() |
![]() ![]() |