Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Mondeo

Reply
 
Thread Tools Display Modes
Old 14-04-2014, 08:04 AM   #1
Midnight Man
Starter Motor
 
Join Date: Mar 2014
Posts: 6
Default 2010 MC Powershift transmission "clunk"

Howdy all, and thank you for reading!

As a recent addition to the Mondeo owners, I have a fairly simple question. When I start my LX TDCi (Powershift) from cold, I hear a "ca-lunk" - not loud, but you can hear it - it sounds almost like the transmission is engaging as it were, if that makes any sense?

In all respects, the car drives perfectly well, doesn't miss a beat on highway or in city traffic.

What I'm wondering is - is that "engaging" type noise as I describe above normal, or something worth investigating?

Midnight Man is offline   Reply With Quote Multi-Quote with this Post
Old 14-04-2014, 12:42 PM   #2
whitelion65
FF.Com.Au Hardcore
 
whitelion65's Avatar
 
Join Date: Apr 2012
Posts: 976
Default Re: 2010 MC Powershift transmission "clunk"

Hi Midnight,
I don't ever hear the transmission. I will have a good listen tonight when I get home.
Steve
whitelion65 is offline   Reply With Quote Multi-Quote with this Post
Old 14-04-2014, 05:47 PM   #3
DFB FGXR6
Donating Member
Donating Member3
 
DFB FGXR6's Avatar
 
Join Date: May 2008
Posts: 12,674
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: For the excellent car-care guide 
Default Re: 2010 MC Powershift transmission "clunk"

I could be the ABS "Self Test". After a restart and when moving off from rest in drive at about 20 km/h there will be a noise you described. Some people can hear it others don't.
__________________
PX MK II Ranger
FG XR6
FG X XR8
Mustang GT

T3 TS50 - gone but not forgotten
DFB FGXR6 is online now   Reply With Quote Multi-Quote with this Post
Old 14-04-2014, 06:17 PM   #4
Midnight Man
Starter Motor
 
Join Date: Mar 2014
Posts: 6
Default Re: 2010 MC Powershift transmission "clunk"

Thank you folks for the advice and input - on rereading, I realise I may not have clarified enough. This noise occurs a moment after starting the car, whilst in park (stationary).

It sounds like the transmission is "engaging" - hence my note above.
Midnight Man is offline   Reply With Quote Multi-Quote with this Post
Old 16-04-2014, 12:16 PM   #5
ope126
FF.Com.Au Hardcore
 
ope126's Avatar
 
Join Date: Jun 2012
Location: Brisbane
Posts: 504
Default Re: 2010 MC Powershift transmission "clunk"

Quote:
Originally Posted by Midnight Man View Post
Thank you folks for the advice and input - on rereading, I realise I may not have clarified enough. This noise occurs a moment after starting the car, whilst in park (stationary).

It sounds like the transmission is "engaging" - hence my note above.
It sound like it might be the A/C compressor.
__________________
2016 (MY17) Ford Mondeo Titanium EcoBoost (Moondust Silver)...more power please!
ope126 is offline   Reply With Quote Multi-Quote with this Post
Old 16-04-2014, 06:01 PM   #6
Midnight Man
Starter Motor
 
Join Date: Mar 2014
Posts: 6
Default Re: 2010 MC Powershift transmission "clunk"

Good thought, Ope!

I will make some tests with the A/C turned off (out of habit, I mostly leave it on when turning off the car).

Many thanks!
Midnight Man is offline   Reply With Quote Multi-Quote with this Post
Old 18-04-2014, 02:51 PM   #7
Fishman
Regular Member
 
Fishman's Avatar
 
Join Date: Jul 2005
Posts: 186
Default Re: 2010 MC Powershift transmission "clunk"

Are you parking on a slight incline when this happens? I think my wife's mondo makes the same sort of noise on start up. Almost as if the transmission is releasing itself from a lock or something. When I park on an incline now, I let the car rest in neutral with the hand brake before moving it to park
Fishman is offline   Reply With Quote Multi-Quote with this Post
Old 18-04-2014, 09:52 PM   #8
Midnight Man
Starter Motor
 
Join Date: Mar 2014
Posts: 6
Default Re: 2010 MC Powershift transmission "clunk"

Thank you Fishman for the thought - this is on a pretty much perfectly flat driveway, so unfortunately, I don't think your situation applies here (though your description of the noise is pretty accurate!).

Am continuing to test A/C and startup
Midnight Man is offline   Reply With Quote Multi-Quote with this Post
Old 20-04-2014, 07:27 AM   #9
borntoshop666
Regular Member
 
Join Date: Apr 2010
Location: Blue Mountains NSW
Posts: 78
Default Re: 2010 MC Powershift transmission "clunk"

mine had been doing it too sometimes.
2010 Diesel Titanium, especially on a cold morning. Maybe its the 2 Clutches engaging upon Start Up?? Sometimes they might align perfectly when the Car is turned off, other times they don't. no Idea, but never had any Transmission Issues in 236000 k's
__________________
Endura St Line AWD in Ruby Red
borntoshop666 is offline   Reply With Quote Multi-Quote with this Post
Old 21-04-2014, 03:35 PM   #10
whitelion65
FF.Com.Au Hardcore
 
whitelion65's Avatar
 
Join Date: Apr 2012
Posts: 976
Default Re: 2010 MC Powershift transmission "clunk"

Well, I tried mine out today. N to R and to D multiple times. I thought I detected a slight noise on one selection, but nothing like you describe.
Good luck with it MnM.
Steve
whitelion65 is offline   Reply With Quote Multi-Quote with this Post
Old 10-06-2014, 09:53 PM   #11
commz
Starter Motor
 
Join Date: Apr 2012
Posts: 19
Default Re: 2010 MC Powershift transmission "clunk"

I know exactly what you're talking about

I had an MB Zetec TDCI which did this every time from cold. Once the engine was warmed up, it was fine. If you left it for a while the clunk would come back.

Has happened on an MC Titanium TDCI as well that I tested and a few other MC's.. hit and miss though, some do it some dont

I find that if you turn the key to the position before it starts and leave it there for a few seconds, it wont happen (even from cold).

Can anyone shed some light?
commz is offline   Reply With Quote Multi-Quote with this Post
Old 10-06-2014, 09:54 PM   #12
commz
Starter Motor
 
Join Date: Apr 2012
Posts: 19
Default Re: 2010 MC Powershift transmission "clunk"

Also, its a very loud CLUNK on startup. You'll definitely notice/feel it
commz is offline   Reply With Quote Multi-Quote with this Post
Old 10-06-2014, 09:55 PM   #13
commz
Starter Motor
 
Join Date: Apr 2012
Posts: 19
Default Re: 2010 MC Powershift transmission "clunk"

Also, I havnt heard the noise on an Ecoboost or 2.3 engine yet..so could be TDCI only?
commz is offline   Reply With Quote Multi-Quote with this Post
Old 11-06-2014, 12:16 AM   #14
Midnight Man
Starter Motor
 
Join Date: Mar 2014
Posts: 6
Default Re: 2010 MC Powershift transmission "clunk"

Quote:
Originally Posted by commz View Post
I know exactly what you're talking about

I had an MB Zetec TDCI which did this every time from cold. Once the engine was warmed up, it was fine. If you left it for a while the clunk would come back.
^^ This is exactly what I'm finding.

I haven't given up on this, despite the lack of posting (have had a couple of family matters drag me away).

I did end up completing testing on the air conditioning - this was not the cause (but thank you for the thoughts all!).

I've had the transmission serviced - oil change, filter change, made no difference to this.

Honestly, I'm only concerned about it if it's a harbringer of trouble to come - if so, then I will take remedial action early, rather than later. If it's an upcoming issue with the transmission, I'll deal with it now before it gets too bad or causes too much further damage - that's my main reason for asking.

Will be working on this further with my mechanic - and obviously will post any findings here in case others in the future may find it helpful.

In the meantime, any further information will be gladly received!
Midnight Man is offline   Reply With Quote Multi-Quote with this Post
Old 11-06-2014, 08:17 AM   #15
commz
Starter Motor
 
Join Date: Apr 2012
Posts: 19
Default Re: 2010 MC Powershift transmission "clunk"

All the best! I thought it was the transmission as well (so I got it serviced, this was the older 6 speed, non powershift). Problem didnt go away.

Could you try turning the key to the position before the car starts and leaving ti there for a few seconds before starting the car to see if the clunk goes away?
commz is offline   Reply With Quote Multi-Quote with this Post
Old 11-06-2014, 08:23 AM   #16
whitelion65
FF.Com.Au Hardcore
 
whitelion65's Avatar
 
Join Date: Apr 2012
Posts: 976
Default Re: 2010 MC Powershift transmission "clunk"

Commz comments point to the noise NOT being transmission. i.e. it happens in both Powershift and conventional auto trans.
Further investigation required.
Good luck
Steve
whitelion65 is offline   Reply With Quote Multi-Quote with this Post
Old 11-06-2014, 03:01 PM   #17
Batman105E
Regular Member
 
Join Date: Jan 2011
Posts: 72
Default Re: 2010 MC Powershift transmission "clunk"

please delete entry.
Batman105E is online now   Reply With Quote Multi-Quote with this Post
Old 17-06-2014, 06:38 AM   #18
Ros5co
Zetec MC Hatch TDCi
 
Join Date: Oct 2011
Location: Brisbane
Posts: 61
Default Re: 2010 MC Powershift transmission "clunk"

My MC TDCi Zetec also does this occasionally. Done it for the nearly three years Iv'e had the car. Interested if there is some explanation.
Ros5co is offline   Reply With Quote Multi-Quote with this Post
Old 17-06-2014, 08:10 AM   #19
Midnight Man
Starter Motor
 
Join Date: Mar 2014
Posts: 6
Default Re: 2010 MC Powershift transmission "clunk"

I have, as suggested, turned the key to the position immediately prior to actually starting the car, and left it in that position a few moments prior to actually starting the car.

This simply changes the timing of the event to occur more quickly after starting - ordinarily without using this tactic, the noise is heard a couple of seconds after starting - with this tactic, it's almost immediate. Varying the length of time the key is left in the "pre start" position makes no difference to the fact that the noise is then heard nearly immediately after starting.
Midnight Man is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 04:33 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL