![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
OzECruisers General Discussions E/N/D vehicles General Discussion ONLY. NO TECH THREADS |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 | ||
Starter Motor
Join Date: Aug 2005
Location: South Australia
Posts: 23
|
After reading posts that the problem with the rising temp all it needs to be fixed is a 3mm hole drilled in the thermostat.
What am i supposed to do to get the thermostat out, because i had a new one put in, but it still goes up to the M and then down to the L after about 5km of driving. |
||
![]() |
![]() ![]() |
![]() |
#2 | ||
PM me if you want
Join Date: Dec 2004
Location: Pk Ranger Modding - QLD 👍
Posts: 7,498
|
undo the two 13mm bolts pop the thermostat out drill a 3mm hole clean up the metal filings created, and drop it back in, do up the bolts, if the engine is cold, you should loose about 200ml of coolant in the process no big deal.
__________________
Owner of first ever car to retrofit BA SSS - the EA2BA Send me a PM if you want to know anything 2010 Ford Ranger PK High Rider (Auto) - 2011 Ford Fiesta (Auto)
|
||
![]() |
![]() ![]() |
![]() |
#3 | ||
Donating Member
![]() Join Date: Aug 2005
Location: St John's Park NSW
Posts: 1,454
|
Is the car really hot or is the guage telling you it is? Have you replaced the Guage Sender? It could be that. Have you tested the Rad Cap? could be it too. So many things.....
Drilling the hole really wont fix temp? AU Falcons had this done as a recall. |
||
![]() |
![]() ![]() |
![]() |
#4 | ||
Starter Motor
Join Date: Aug 2005
Location: South Australia
Posts: 23
|
temp is fine, just as i first drive it does the rising.
but in changing the thermostat, so much coolant was gushing out after a few turns and wouldn't stop. Is it normal for it to do that? |
||
![]() |
![]() ![]() |
![]() |
#5 | ||
Donating Member
![]() Join Date: Aug 2005
Location: St John's Park NSW
Posts: 1,454
|
Yes mate. There is residual pressure and that would force it out and also you have a fair amount of water in there.
I would most definitely check the Temp sender. (part numbers XF10884A or EB10884A) Make sure you put a NEW seal around the thermostat and that the mating surfaces of the Thermostat housing and the outlet hosing have no pits or anything of the sort. One other thing, make sure the car is COLD before you add more water. EA, B, D Heads can crack VERY easy. |
||
![]() |
![]() ![]() |
![]() |
#6 | ||
Starter Motor
Join Date: Aug 2005
Location: South Australia
Posts: 23
|
cheers
thanks, i will give it another go |
||
![]() |
![]() ![]() |
![]() |
#7 | ||
Starter Motor
Join Date: Aug 2005
Location: South Australia
Posts: 23
|
Thanks for all replys
Thermostat replaced, and temperature now doesn't go up and down It was sending me crazy Thanks Karl |
||
![]() |
![]() ![]() |