![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 | ||
Thailand Specials
Join Date: Aug 2009
Location: Centrefold Lounge
Posts: 49,086
|
I'm after a set of wheels for my WS Fiesta, but I'm unsure where to look, at the moment, the 17" wheels from Mountune Performance have caught my eye, but I'd like to see what else is out there?
Thanks much. |
||
![]() |
![]() ![]() |
![]() |
#2 | ||
Regular Member
Join Date: Jul 2009
Posts: 489
|
You are not going to get any wheels from Aus yet due to the euro offset
theres 5 sets i no of and only 2 i like 1 set from Bob jane and the other set i am getting see my wheel post the wheels are there. The uk has around 30 sets of wheels currently for the fiesta but you will pay through the roof on tax to ship them over.
__________________
http://www.facebook.com/pages/Steve-...861161?sk=wall http://www.ambient-aperture-photography.com (PLEASE DONT HESITATE TO PURCHASE MY WORK) http://www.flickr.com/photos/stevemack |
||
![]() |
![]() ![]() |
![]() |
#3 | ||
Zetec with 17's
Join Date: May 2005
Posts: 67
|
|
||
![]() |
![]() ![]() |
![]() |
#4 | |||
Thailand Specials
Join Date: Aug 2009
Location: Centrefold Lounge
Posts: 49,086
|
Quote:
With the taxes for shipping them over, what would you pay? They're just over $2000 base price once you convert money. |
|||
![]() |
![]() ![]() |
![]() |
#5 | ||
Regular Member
Join Date: Nov 2007
Location: Liverpool, NSW
Posts: 278
|
If the WS is the same as the WQ, Ozzy Tyres had a few to fit, i put Konig Wheels with rubber for $1600.
__________________
2006 WQ Fiesta Zetec Sea Grey Interior:- MOMO Blue Leather Gear Knob, Window tint, Scuff Plates, ST Black & Blue Leather seats, Soundstream Amp & 5x7 speakers, Sony Headunit, Pioneer sub & Amp. Under the Hood:- Superchips ECU Flash Tune, Denso Iridium plugs, KV85 Magnecor Leads, BMC CDA Induction. Exterior:- Spoiler, clear side repeaters, Lowered (35mm) King Springs, Whiteline 22mm Rear sway bar, 2" cat back exhaust with a dual conversion, Konig 17" Hotswap with Kumho Rubber, HID's. |
||
![]() |
![]() ![]() |
![]() |
#6 | ||
Regular Member
Join Date: Feb 2009
Posts: 87
|
Tempe wheels and tyres have a few packages to fit fiesta.
|
||
![]() |
![]() ![]() |
![]() |
#7 | ||
Regular Member
Join Date: Aug 2009
Posts: 46
|
I've been having the same troubles trying to find wheels I like for my WS and finally had some luck on Saturday. There are a few sets available that I saw on the JAX tires website so I went down to see them and one of the guys showed me the new YHI catalog that he had just got his hands on.
There are about 4 or 5 more options from Advanti and Enkei available now and I'm going for some 17" Advanti Bliss wheels which are WS specific, the guys from JAX is calling me tomorrow with a price. |
||
![]() |
![]() ![]() |
![]() |
#8 | ||
FF.Com.Au Hardcore
Join Date: May 2006
Location: Brisbane
Posts: 1,053
|
This company in the UK sends wheels all over the world, heaps of makes and styles to choose from.
Last time I looked into it the cost of buying a set of rims from them and air freighting them over here worked out cheaper than I could even get them for in Australia! http://www.alloywheels.com/search.as...sta%20Mk%206-7 |
||
![]() |
![]() ![]() |
![]() |
#9 | ||
Regular Member
Join Date: Feb 2009
Location: Melbourne
Posts: 290
|
Did you factor in import duties of 15% for value of purchases worth $1000 AUD or more? If so, then that's cheap.
|
||
![]() |
![]() ![]() |
![]() |
#10 | |||
Whipple Induced
Join Date: Jan 2005
Location: WWW
Posts: 4,338
|
I optioned the expensive factory 17" for my wifes Zetec and I have to say that even after 3-4 months of ownership, I'm still delighted with the choice. The design really suits the cars styling and fills the guards well. the only thing I don't like is the steering rack limiter which reduces the cars turning cycle.
![]()
__________________
Quote:
|
|||
![]() |
![]() ![]() |
![]() |
#11 | ||
2005 BA II GTP
Join Date: Nov 2007
Location: Sydney
Posts: 2,676
|
Looks great Colville.
|
||
![]() |
![]() ![]() |
![]() |
#12 | |||
FF.Com.Au Hardcore
Join Date: May 2006
Location: Brisbane
Posts: 1,053
|
Quote:
|
|||
![]() |
![]() ![]() |
![]() |
#13 | ||
Thailand Specials
Join Date: Aug 2009
Location: Centrefold Lounge
Posts: 49,086
|
Mountune 17" wheels are 1030 euro, with the exchange rate at $.58 AUD to 1 Euro, they come out at $1775.86 before shipping and import tax. Do you have to pay GST on top of the 10% import tax?
Anyone here who has had wheels shipped over from Europe, how much roughly did that cost? Also, can you go in to a Ford dealership and buy the 17" Zetec wheels? |
||
![]() |
![]() ![]() |
![]() |
#14 | ||
Regular Member
Join Date: Aug 2009
Posts: 46
|
I just got a call back from the bloke at JAX for my 17“ Advanti Bliss wheels he told me $1290 fitted and balanced, I’m pretty stoked with that now all I need now is my tax cheque
|
||
![]() |
![]() ![]() |
![]() |
#15 | ||
Regular Member
Join Date: Nov 2007
Location: Liverpool, NSW
Posts: 278
|
Wat sort of tyres with that? Because that is pretty cheap, i got a price like that when i was looking, but with rubbish tyres.
__________________
2006 WQ Fiesta Zetec Sea Grey Interior:- MOMO Blue Leather Gear Knob, Window tint, Scuff Plates, ST Black & Blue Leather seats, Soundstream Amp & 5x7 speakers, Sony Headunit, Pioneer sub & Amp. Under the Hood:- Superchips ECU Flash Tune, Denso Iridium plugs, KV85 Magnecor Leads, BMC CDA Induction. Exterior:- Spoiler, clear side repeaters, Lowered (35mm) King Springs, Whiteline 22mm Rear sway bar, 2" cat back exhaust with a dual conversion, Konig 17" Hotswap with Kumho Rubber, HID's. |
||
![]() |
![]() ![]() |
![]() |
#16 | |||
Regular Member
Join Date: Feb 2009
Location: Melbourne
Posts: 290
|
Quote:
The last time I asked about the 17" Zetec wheels at the dealer, they referred me straight to the company that they get it off and that was www.wheelking.com.au Still having a hard time finding the right wheels for the Fiesta so got a feeling that I might eventually give in and just get those 17" Zetec wheels even if they cost an arm and a leg *Sigh* |
|||
![]() |
![]() ![]() |
![]() |
#17 | |||
Regular Member
Join Date: Aug 2009
Posts: 46
|
Quote:
|
|||
![]() |
![]() ![]() |
![]() |
#18 | |||
Thailand Specials
Join Date: Aug 2009
Location: Centrefold Lounge
Posts: 49,086
|
Quote:
I think I might just take off my hubcaps and roll with the black steelies, lower it slightly etc. |
|||
![]() |
![]() ![]() |
![]() |
#19 | |||
Zetec with 17's
Join Date: May 2005
Posts: 67
|
Quote:
![]() |
|||
![]() |
![]() ![]() |
![]() |
#20 | ||
Regular Member
Join Date: Apr 2009
Location: Moorebank
Posts: 56
|
It depends if want wheels specifically done in the 4x108 or if you're happy to get something drilled to suit. Most wheels that have a centre cap can be bought as a blank and the distributor can drill them or you can do like me and choose a wheel and have it redrilled. I paid about $1300 for my 18's with tyres at Bob Jane a couple of years ago so there should be plenty to chose from if you go the redrill route.
|
||
![]() |
![]() ![]() |
![]() |
#21 | ||
Regular Member
Join Date: Jul 2009
Posts: 117
|
Even a set of 4 standard Zetec 16" wheels with the stansard Continental 195/45VR 16 tyres are $2250 after market. Sheesh! That's 10% of the price of the car.
http://www.wheelking.com.au/Wheels/t...9/Default.aspx I personally prefer the 16s (with the Continentals), which are very grippy in my experience. |
||
![]() |
![]() ![]() |
![]() |
#22 | ||
Regular Member
Join Date: Jul 2009
Posts: 117
|
Out of interest, does anyone know the Australian price for the standard WS Zetec tyres, the ContiPremiumContact 2 195/45 R16 ?
I can't find an internet price. This site doesn't have the correct size for the Zetec: http://www.carbonblack.com.au/car-ty...contact-2.aspx |
||
![]() |
![]() ![]() |
![]() |
#23 | |||
Thailand Specials
Join Date: Aug 2009
Location: Centrefold Lounge
Posts: 49,086
|
Quote:
|
|||
![]() |
![]() ![]() |
![]() |
#24 | ||
Death B4 Decaf
Join Date: Mar 2006
Location: South Hobart
Posts: 731
|
I wouldn't bother with a 195. I went to 205's, lots more options at better prices. The 195 is an expensive pain in the ***, whoever makes it.
& I rate the Toyo Proxe T1R's over the Continental as well, especially in the rain.
__________________
06 fiesta Zetec in Tango. Factory scuff plates, mats, spoiler & leather gear knob. K&N panel filter. Focus clear side indicators. Colour coded. |
||
![]() |
![]() ![]() |
![]() |
#25 | |||
Regular Member
Join Date: Jul 2009
Posts: 117
|
Quote:
http://www.wheelking.com.au/Wheels/t...9/Default.aspx Are there 205mm tyres that fit on them? In fact how do you tell whether tyres will fit wheels from the tyre and wheel dimensions. Eg. For 16" by 6.5" wheels, 6.5" is 165 mm. The tyres I have are: 195/45 R16 (84H) Conti PremiumContact 2 tyres, which means 195mm diameter, 45% profile, 16" radial for a 500 kg max load and 210 km/h max speed. See also here: http://www.conti-online.com/generato...n;tabNr=4.html For example will the 205/45 R16 (83W) Conti PremiumContact 2 tyres fit on 6.5" rims? |
|||
![]() |
![]() ![]() |
![]() |
#26 | ||
Death B4 Decaf
Join Date: Mar 2006
Location: South Hobart
Posts: 731
|
Well I went from 195/45/16s to 205/45/16s on the standard 16x6.5 rims. The outside diameter can only be a certain percentage larger than standard (can't remember what) but going to a 205 is within the limits.
__________________
06 fiesta Zetec in Tango. Factory scuff plates, mats, spoiler & leather gear knob. K&N panel filter. Focus clear side indicators. Colour coded. |
||
![]() |
![]() ![]() |
![]() |
#27 | ||
Death B4 Decaf
Join Date: Mar 2006
Location: South Hobart
Posts: 731
|
Just done some more digging, the O/D of the 195 is 584mm & the 205 is 591mm according to Toyo. The difference is 1.19% & I think you can go 2%, but don't quote me on that.
__________________
06 fiesta Zetec in Tango. Factory scuff plates, mats, spoiler & leather gear knob. K&N panel filter. Focus clear side indicators. Colour coded. |
||
![]() |
![]() ![]() |
![]() |
#28 | ||
Regular Member
Join Date: Jun 2009
Location: Melbourne
Posts: 66
|
In Victoria, the outside diameter of the tyre size cannot be increased by more than 15mm. Check out: http://www.vicroads.vic.gov.au/NR/rd...340/0/VSI8.pdf
A well known tyre size calculator is available at: http://www.miata.net/garage/tirecalc.html Just type in the old and new tyre sizes and you can immediately determine the change in outer diameter and the effect that it will have on your speedo. |
||
![]() |
![]() ![]() |
![]() |
#29 | ||
FF.Com.Au Hardcore
Join Date: Oct 2006
Location: Queensland
Posts: 1,801
|
Will I void my warrenty or insurance by changing from a 195/16 45 to an equivlent 205 tyre? Price difference between the two is quite substancial, but not at the risk of voiding my warrenty of insurance.
__________________
CURRENT: 2017 Escape Titanium 2.0L EcoBoost with Technology Pack in White Platinum PREVIOUS 2015 Fiesta ST / 2012 Focus Titanium / 2009 Fiesta Zetec / 2004 Fiesta Zetec |
||
![]() |
![]() ![]() |
![]() |
#30 | |||
Regular Member
Join Date: Aug 2009
Posts: 46
|
Quote:
They might give you grief if you ever made a claim and they found that the wheels or tires were faulty and a direct factor or cause to an accident but the best thing to do would be to call your insurer and query it directly with them. |
|||
![]() |
![]() ![]() |