Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Laser and Telstar

Reply
 
Thread Tools Display Modes
Old 30-01-2008, 01:14 PM   #1
gregg_13
2016 PX2 Ranger XLT
 
gregg_13's Avatar
 
Join Date: Aug 2006
Location: Perth
Posts: 334
Default HELP!!, Clutch squeak in a 99 Laser

The car in question is a 99 KN 1.8L Laser sedan, the car very rarely gets driven since we live so close to the train and we use the ute most weekends. however this has caused a problem, now when you press down on the clutch and subsiquently release the clutch there is a squeaking sound, quite loud out side.

Does anybody have any idea what this may be?

My first impression was possibly the pedal box but now Im leaning toward the throwout not having enough lubrication,
if this is it is there any access to spray some sort of lubrication in there and what would people reccomend?


Last edited by gregg_13; 30-01-2008 at 01:14 PM. Reason: title
gregg_13 is offline   Reply With Quote Multi-Quote with this Post
Old 30-01-2008, 06:02 PM   #2
dirty hands
Over Thinker
 
dirty hands's Avatar
 
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
Default

some kind or molly grease in a spray can if you can spray it into the clutch plate
it may be rust in the surfaces where the relaese bearing and pressure plate run

but if it is the grease in the sealed relase bearing has hardened and a good highway run wont melt the grease then that bearing may need to be replaced
__________________
My car goes Brumm Brumm
dirty hands is offline   Reply With Quote Multi-Quote with this Post
Old 30-01-2008, 06:07 PM   #3
gregg_13
2016 PX2 Ranger XLT
 
gregg_13's Avatar
 
Join Date: Aug 2006
Location: Perth
Posts: 334
Default

Cheers for that, had a quick look and listen this afternoon, and since the sound is when the pedal is pressed and not while driving I'm thinking and hoping its more toward the pedal, gonna check the rubber boots and seals and get some grease on there.
gregg_13 is offline   Reply With Quote Multi-Quote with this Post
Old 30-01-2008, 11:14 PM   #4
dirty hands
Over Thinker
 
dirty hands's Avatar
 
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
Default

wd 40 or grease the spring
__________________
My car goes Brumm Brumm
dirty hands is offline   Reply With Quote Multi-Quote with this Post
Old 31-01-2008, 09:12 AM   #5
gregg_13
2016 PX2 Ranger XLT
 
gregg_13's Avatar
 
Join Date: Aug 2006
Location: Perth
Posts: 334
Default

Yeah got in there last night with some soft seal, it was the rubber boot where the arm goes into the bell housing, amazing how loud it was outside the car for such a minor thing.
gregg_13 is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 01:14 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL