|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
07-03-2015, 07:44 PM
|
#1 | ||
|
Starter Motor
Join Date: Feb 2015
Posts: 4
|
Chaps,
My first post, thanks for letting me tag along. I'm considering popping in a toyota T50 gearbox in a mk. II ford escort panel van running a 1600 crossflow. How involved is the process? I've tried finding links on the forum but have come up short. All advice gratefully accepted. Cheers. |
||
|
|
|
07-03-2015, 09:56 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Apr 2012
Location: Taromeo
Posts: 10,587
|
Bell housing, clutch plate, pressure plate, modified thrust bearing, speedo cable, modified cross member should be about it.
Someone probably sells it all. |
||
|
|
|
| This user likes this post: |
|
07-03-2015, 11:31 PM
|
#3 | ||
|
Starter Motor
Join Date: Feb 2015
Posts: 4
|
Mighty obliged to you!
Cheers. |
||
|
|
|
|
09-03-2015, 09:01 AM
|
#4 | ||
|
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
post back what starter motor you used
__________________
My car goes Brumm Brumm |
||
|
|
|
|
09-03-2015, 10:21 AM
|
#5 | ||
|
Starter Motor
Join Date: Feb 2015
Posts: 4
|
I'll let you know...once I pick up the car. I've just recently bought the panel van and I'm a little green behind the ears about it all. So, I'm doing my research.
I'll let you know once I go get her. |
||
|
|
|
|
09-03-2015, 07:03 PM
|
#6 | ||
|
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
one like this ?
they have got a stupid lower ball joint arm type thingy with a bush 
__________________
My car goes Brumm Brumm Last edited by dirty hands; 09-03-2015 at 07:11 PM. |
||
|
|
|
|
09-03-2015, 07:53 PM
|
#7 | ||
|
Starter Motor
Join Date: Feb 2015
Posts: 4
|
That be the one, but I got windows along the side. '81 model.
So, do you think it's worth effort? |
||
|
|
|
|
09-03-2015, 09:51 PM
|
#8 | ||
|
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
yes ..do a lot of research about this power train set up you like
these escorts did have a 2 ltr motor fitted the diffs are very good 1600 cross flow a grunt motor with a 4 speed box its still ok still looking at this question of the T50 http://www.gearboxconversion.com/Toyota_T50.html with the T50 box you might need a custom drive shaft built .... not sure myself . you might want a brake upgrade later . .only drums at the back small disc at the front and struts set up
__________________
My car goes Brumm Brumm Last edited by dirty hands; 09-03-2015 at 10:09 PM. |
||
|
|
|
Toyota T50
Linear Mode
