|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
Drag Racing Discuss Drag Racing here be it dirt or tarmac. Sponsored by Sydney Dragway. |
|
Thread Tools | Display Modes |
28-04-2013, 09:03 AM | #1 | ||
Regular Member
Join Date: Aug 2007
Posts: 135
|
Hi Guys,
What experiences have people had with setting up caltracs. I was thinking the split mono-leaf rear suspension and am guessing 90/10 shocks and probably six cylinder springs on the front. I am running a 800hp 440 cube XW falcon, and trying to get it to hook up with 275 radials. any help would be appreciated |
||
28-04-2013, 01:14 PM | #2 | ||
Banned
Join Date: Mar 2010
Location: Prasac-ville
Posts: 6,976
|
what times are you looking to run? how heavy is the car?
|
||
28-04-2013, 04:25 PM | #3 | ||
Regular Member
Join Date: Aug 2007
Posts: 135
|
hey,
I am aiming for mid 9's, it is still very much a street car. I haven't weighed it yet, but it'd have to be around 3800lbs I would say. We have it set up with a 400 shot of nitrous too, but am thinking it'll need a progressive controller to bring it on thanks again |
||
28-04-2013, 05:32 PM | #4 | ||
Banned
Join Date: Mar 2010
Location: Prasac-ville
Posts: 6,976
|
we run standard style Capri leaf springs with Strange double adjustable shocks (no springs) on the front is a set of Koni 60/40 (makes it a little harder to wheelstand) with the Caltracs. will try and find a picture, or if i remember take one when go to the brother's next time.
a mate run's similar on his XB Falcon, it's 4150lbs, 750hp runs 10.30@133 1.47 60' http://www.youtube.com/watch?v=J7DJY0wH88Y Last edited by prasac; 28-04-2013 at 05:38 PM. |
||
01-05-2013, 12:04 PM | #5 | ||
Regular Member
Join Date: Mar 2009
Location: Adelaide hills
Posts: 271
|
have a look at this thread on yellow bullet,it so long but if ya have a sift through youll find some great info
http://www.yellowbullet.com/forum/sh...d.php?t=288916
__________________
|
||
02-05-2013, 12:04 AM | #6 | |||
FF.Com.Au Hardcore
Join Date: May 2009
Location: Perth
Posts: 3,556
|
Quote:
Simon (Grencapri408) set up my caltracs, maybe he can help The calvert racing shocks are a good thing too
__________________
'68 XT Fairmont, 9.48@141.6 '69 Capri '95 triumph speed triple, '10 Fat Bob My XT Fairmont http://www.fordforums.com.au/showthread.php?t=11298079 My capri track car http://www.fordforums.com.au/showthread.php?t=11492523 |
|||
03-05-2013, 02:19 AM | #7 | ||
FF.Com.Au Hardcore
Join Date: Jan 2009
Location: Country SA
Posts: 722
|
Made our own caltracs back in the mid 90's (didn't even know that's what they were called but copied them from a small pic in Hot Rodding mag) for my XB coupe. Ran 6cyl XA Fairmont front springs, 90/10 shocks and no swaybar up front. The rear I removed a leaf on each side (maybe 2?) and ran standard factory green XY rear shocks. The car sat a little lower on one side than the other but was great on the strip; tracked straight and lifted the front equally on each side when launched. I didn't like them on the street though, probably should have taken the preload out of them? Oh and it was a manual.
__________________
The Car - http://www.fordforums.com.au/showthread.php?t=11358570 The Engine Rebuild- http://www.fordforums.com.au/showthread.php?t=11361067 |
||