Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Fiesta, Festiva and Ka

Reply
 
Thread Tools Display Modes
Old 12-12-2014, 09:43 PM   #1
xpunxnotdeadx
Starter Motor
 
Join Date: Dec 2014
Posts: 5
Smile Hey guys need help

Got a ford festiva 1999 1.5L replaced the tappets and cleaned the engine heads
Changed oil filter fuel filter drove down road and car came to a holt oil light
Came on towed car home cleaned out sump was filthy as cleaned it replaced and flushed turned the key engine won't turn over but sounds like wants to start restarted ecu and checked battery help have checked relay too any ideas thankyou

xpunxnotdeadx is offline   Reply With Quote Multi-Quote with this Post
Old 12-12-2014, 10:47 PM   #2
dirty hands
Over Thinker
 
dirty hands's Avatar
 
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
Default Re: Hey guys need help

I know this type of car and its mazda engine

http://www.fordforums.com.au/showthread.php?t=11426230

please confirm
it is turning over but wont start
or engine will not rotate a crank revolution

some history please
is this a poorly serviced or high km motor

maybe
faulty oil warning light
oil pump failure=ceased engine

while you had the sump off did
you have time to check a main bearing cap or conrod bearing
__________________
My car goes Brumm Brumm

Last edited by dirty hands; 12-12-2014 at 10:52 PM.
dirty hands is offline   Reply With Quote Multi-Quote with this Post
Old 12-12-2014, 11:12 PM   #3
xpunxnotdeadx
Starter Motor
 
Join Date: Dec 2014
Posts: 5
Default Re: Hey guys need help

The engine cranks Theres power at the distributor cap
Low kms but questionable condition as the oil pick up was absolutely filthy engine not ceased

Thanks
xpunxnotdeadx is offline   Reply With Quote Multi-Quote with this Post
Old 13-12-2014, 07:03 AM   #4
dirty hands
Over Thinker
 
dirty hands's Avatar
 
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
Default Re: Hey guys need help

good that it turns over and there is spark

so ecu is working
are all the fuses ok

I would look at fuel delivery next
maybe a fuel filter
check if fuel is getting to the injectors
__________________
My car goes Brumm Brumm
dirty hands is offline   Reply With Quote Multi-Quote with this Post
Old 13-12-2014, 02:58 PM   #5
xpunxnotdeadx
Starter Motor
 
Join Date: Dec 2014
Posts: 5
Smile Re: Hey guys need help

Heyo fuel is getting to the injectors just no spark to the spark plugs :(
xpunxnotdeadx is offline   Reply With Quote Multi-Quote with this Post
Old 13-12-2014, 04:02 PM   #6
Pursya
Regular Member
 
Join Date: Jul 2012
Posts: 497
Default Re: Hey guys need help

Leads?
Is there a spark at the end of each lead?
Pretty easy to check. If no, and there's a distributor involved maybe there's an issue with the leads or a cracked distributor.
Only guessing.
Pursya is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 01:55 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL