|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
16-06-2024, 04:50 PM
|
#1 | ||
|
MacClive
Join Date: May 2024
Posts: 3
|
I just replaced the head gasket on my 2007 Mondeo XR5 and am having an issue with Cylinder 1 not firing.
Th engine light is NOT on. Car idles OK, but if I disconnect and reconnect the coil lead on Cylinder 1 there is no change in performance. If I disconnect any other coil performance deteriorates and then gets better when it is reconnected (as you wourl expect. My ODB intermittently tells me that Cylinder 1 is failing with a P301 error code. If I am driving, it feels like the cylinder is trying to kick in when I accelerate. We've tested the spark, which looks strong and have swapped coils and sparkplugs with other cylinders. We listened to each injector using a screwdriver as a stethescope and they all sound the same. Any suggestions appreciated. |
||
|
|
|
16-06-2024, 07:14 PM
|
#2 | ||
|
FG XR6 Ute & Sedan
 Join Date: Oct 2006
Location: Bibra Lake WA
Posts: 23,521
|
How many km has it done? Have you checked the compression on all cylinders?
__________________
regards Blue |
||
|
|
|
|
17-06-2024, 07:13 AM
|
#3 | ||
|
MacClive
Join Date: May 2024
Posts: 3
|
She's done just shy of 200k
Thanks for the tip. We'll check the compression next session |
||
|
|
|
|
24-06-2024, 06:59 AM
|
#4 | ||
|
MacClive
Join Date: May 2024
Posts: 3
|
The cylinder 1 issue ended up being a valve issue so we had to take the head off again. Fixed that up and now we cant start the engine.
- Timing is right - We have good sparks - Engine turns over but just wont start. It "feels" like the motor isn't turning over as fast as it used to. I'm wondering if it could be starter motor, but an advice appreciated. |
||
|
|
|
|
24-06-2024, 08:41 AM
|
#5 | ||
|
DIY Tragic
Join Date: Apr 2018
Location: Sydney, more than not. I hate it.
Posts: 22,529
|
What fault codes are you getting?
Will it catch on ether spray but not continue to run? |
||
|
|
|
Cylinder 1 not firing on 2007 Mondeo XR5
Linear Mode
