|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
24-08-2008, 02:05 PM
|
#1 | ||
|
Regular Member
Join Date: Nov 2006
Posts: 76
|
just purchased a new oxygen sensor for my s1 au i6. its a universal one with no plug.salesman told me the instructions would tell me how to wire it up.my problem is the instructions are brief.all it says is BLUE wire(signal to computer)WHITE wire(sensor ground),2 BLACK wires(heater-not polarity dependant).my car has 2 GREY wires,1 BLACK+WHITE trace wire,1 LIGHT GREEN wire.what i need to know is which colors to connect to each other?hope this makes sense. thanks rob
|
||
|
|
|
24-08-2008, 03:55 PM
|
#2 | |||
|
AU DIE HARD
  
Join Date: Nov 2005
Location: Between 2nd and 5th gear
Posts: 5,073
 
|
http://www.fordforums.com.au/vbporta...article&id=299
have alook round here in the Tech section
__________________
........Age and treachery will ALWAYS overcome youth and skill....... CORTINA 250 2V POWER soon to be AUXR8 Windsor pwrd .............WINDSOR WARLORD WHO CARRIES THE CLEVO MAFIA AND BROKEN BOSSES... .........................  .........................Quote:
|
|||
|
|
|
|
24-08-2008, 06:03 PM
|
#3 | ||
|
Regular Member
Join Date: Nov 2006
Posts: 76
|
thats whoosha,but i looked through the tech section and couldn't find what i need. what i need is which color wires on the loom in the engine bay do i connect to the wires of the new oxygen sensor.
NEW OXYGEN SENSOR" BLUE(signal to computer) WHITE(sensor ground) BLACK x2(heater not polarity dependant) ENGINE BAY CONNECTOR" GREY x2 wires LIGHT GREEN BLACK WIRE+ WHITE trace i need to know as an example:do i connect 2x black(new sensor)to 2x grey(connector in engine bay) do i put WHITE to the LIGHT GREEN,do i put WHITE to the BLACK+WHITE trace ect... someone must have fitted a universal oxygen sensor with bare wires(no connector) and had to wire it up. thanks rob |
||
|
|
|
|
24-08-2008, 08:02 PM
|
#4 | |||
|
FF.Com.Au Hardcore
Join Date: Sep 2006
Posts: 2,981
|
Quote:
|
|||
|
|
|
oxygen sensor wiring help
Linear Mode
