Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > General Topics > The Pub

The Pub For General Automotive Related Talk

Reply
 
Thread Tools Display Modes
Old 09-08-2007, 02:18 PM   #1
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default Traction bars saved me and the car!!

Today while driving around for work I noticed my steering feel a bit toey.I had found one of my tyres had low air pressure. I filled it up and off I went. I headed from the city towards King Georges Road inside the m5 first tunnel. From the left hand side rear I had a very strange noise which sounded like the diff or bearing. Then bung something broke free!! the car continued forward and slightly sideways in the tunnel but luckily I counter steered and stopped straight as mt my rear passengers tyre bounced past my passengers window!! Luckily even though I was in heavy traffic no everyone stopped .I jumped out to find that 4 of my 5 rear wheel studs had sheared off .

The traction bars under my leaf springs literally gave the car enough ground clearance that no damage had occured to the brake,axle housing or anything else under the car.Also because of the extra clearance because of the traction bars the car slid forward safely like it was on skis. If the traction bars were not on the car then the bottom would have dug into the ground and planted me into the wall. I was towed to my wreckers ,a good axle,disc and handbrake asssembly installed and I am safely home.Thank heavens.

The traction bars saved my butt!!

__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 09-08-2007, 02:24 PM   #2
BlackLS
Guest
 
Posts: n/a
Default

What time was this about? Do you know what may have caused the broken studs?

Good to hear you're safe. The M5 tunnel is probably one of the worst places to have an acco.
  Reply With Quote Multi-Quote with this Post
Old 09-08-2007, 02:25 PM   #3
jcxr
Tribal Elder
 
jcxr's Avatar
 
Join Date: Jul 2005
Location: Yarrambat
Posts: 2,278
Default

All praise the illegal modifications.LOL
jcxr is offline   Reply With Quote Multi-Quote with this Post
Old 09-08-2007, 02:47 PM   #4
RG
Back to Le Frenchy
 
RG's Avatar
 
Join Date: Feb 2005
Location: Back home.....
Posts: 13,346
Default

Bloody hell, wha tis the go with AU's shearing wheel nuts like this. Not the first time I've heard of it happening, sam ething happened to Casper didn't it.
__________________
Quote:
Originally Posted by drew`SEVNT5
nah mate, aussie cars are the besterest and funnerest, nothing beats them, specially a poofy wrong wheel drive
07 Renault Sport Megane F1 Team R26 #1397
RG is offline   Reply With Quote Multi-Quote with this Post
Old 09-08-2007, 03:09 PM   #5
BeStRaFe
lpg = big boom!
 
BeStRaFe's Avatar
 
Join Date: Oct 2006
Posts: 1,377
Default

wtf is a traction bar?
__________________
BF Futura Dedicated E-GAS w/Ghia bling
Project: 86 ZL Fairlane, Red, Sunroof, 310,000KM
BeStRaFe is offline   Reply With Quote Multi-Quote with this Post
Old 09-08-2007, 03:31 PM   #6
X000BOSS
I12 GO FASTER
 
X000BOSS's Avatar
 
Join Date: Jun 2005
Location: SYDNEY - west
Posts: 284
Default

glad it ended like that. could have been much worse
__________________
MY WIFE IS SO IMMATURE, SHE SUNK MY TOY BOATS WHILE I WAS HAVING A BUBBLE BATH
X000BOSS is offline   Reply With Quote Multi-Quote with this Post
Old 09-08-2007, 03:37 PM   #7
Grippy
Racing improves the breed
 
Grippy's Avatar
 
Join Date: Apr 2006
Location: SE Melbourne
Posts: 3,982
Default

Did the loose wheel bounce into anything, that could have been much much worse ala Craig Lowndes at Bathurst the other year.
__________________
1970 Mini Cooper S Historic Group Nc Touring car

1964 Mini Cooper S Historic Group Nb Touring car

2024 Subaru Outback Touring XT

Victorian Hill Climb Championship
Grippy is offline   Reply With Quote Multi-Quote with this Post
Old 09-08-2007, 03:48 PM   #8
rick'o
Car Slut
 
rick'o's Avatar
 
Join Date: Feb 2005
Posts: 105
Default

Quote:
Originally Posted by BeStRaFe
wtf is a traction bar?
I'll second that!
rick'o is offline   Reply With Quote Multi-Quote with this Post
Old 09-08-2007, 04:22 PM   #9
The Yeti
FF.Com.Au Hardcore
 
The Yeti's Avatar
 
Join Date: May 2006
Location: In my happy place
Posts: 5,432
Default

you young guys these things have been arround since jebus play'd full back

http://www.wallaceracing.com/leafspringtraction.htm
__________________
Pariahs C.C.
What could possibly go wrong

I post images with postimg.cc (so I don’t forget)
The Yeti is offline   Reply With Quote Multi-Quote with this Post
Old 09-08-2007, 04:38 PM   #10
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default

Quote:
Originally Posted by The Yeti
you young guys these things have been arround since jebus play'd full back

http://www.wallaceracing.com/leafspringtraction.htm
The bottom chrome ones are like mine.Unfortunately they are a little worse for wear on that side and bent out of shap so I removed them.
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 09-08-2007, 04:44 PM   #11
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default

Quote:
Originally Posted by BlackLS
What time was this about? Do you know what may have caused the broken studs?

Good to hear you're safe. The M5 tunnel is probably one of the worst places to have an acco.
10:30 am mate. I was in the Roseberry area at 6am.Lucky it didnt give way on the m4 on the way down there.The towie believes it is a common cause by using rattle guns to tighten tyres but I dont know what caused it.

Here is the photo of the offending axle!!

http://www.fordforums.com.au/attachm...chmentid=33212
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 09-08-2007, 05:01 PM   #12
Feathers
Lucifer's Angel
 
Feathers's Avatar
 
Join Date: Dec 2004
Location: Sydney
Posts: 5,282
Default

Damn that was both lucky and unlucky. Glad to hear it wasn't as bad as it could have been.


You could have called into our depot and had a chat with Dad while you were waiting for the towies!

I knew there was a reason why I don't let tyre places tighten my studs with a rattle gun.
Maybe that's just so I actually have a chance to get them off if I have a flat out on the road somewhere
__________________
SINISTER BA XR6
Blueprint, manual, 4490's, Redback 2.5" dual exhaust, BA Typhoon rims, tint, fog light covers, BF tailights, blue illuminated window switches, Ghia bootlid carpet, lower grille, FPV door spears, steering wheel & interior bits, XR6T + F6 intake, K&N filter, Typhoon spoiler, tuned, sway bars, custom angel eyes & plates..YUM!

If there's one thing guys in Holdens hate more than being beaten by a Ford...
It's being beaten by a girl driving a Ford
Feathers is offline   Reply With Quote Multi-Quote with this Post
Old 09-08-2007, 05:11 PM   #13
BeStRaFe
lpg = big boom!
 
BeStRaFe's Avatar
 
Join Date: Oct 2006
Posts: 1,377
Default

Quote:
Originally Posted by Stav
10:30 am mate. I was in the Roseberry area at 6am.Lucky it didnt give way on the m4 on the way down there.The towie believes it is a common cause by using rattle guns to tighten tyres but I dont know what caused it.

Here is the photo of the offending axle!!

http://www.fordforums.com.au/attachm...chmentid=33212
i have sheered bolts because of rattle guns :(
even had tighting will do it over time... hey are stressing the metal when they pound away, its going to happen.
u can not obey the laws of physics
__________________
BF Futura Dedicated E-GAS w/Ghia bling
Project: 86 ZL Fairlane, Red, Sunroof, 310,000KM
BeStRaFe is offline   Reply With Quote Multi-Quote with this Post
Old 09-08-2007, 05:17 PM   #14
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default

Quote:
Originally Posted by Feathers
Damn that was both lucky and unlucky. Glad to hear it wasn't as bad as it could have been.


You could have called into our depot and had a chat with Dad while you were waiting for the towies!

I knew there was a reason why I don't let tyre places tighten my studs with a rattle gun.
Maybe that's just so I actually have a chance to get them off if I have a flat out on the road somewhere
Hhehe I would have loved to.I got towed out by one truck and then a contract towie picked my car up a second time at eve st arncliffe just out of the tunnel
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 09-08-2007, 09:35 PM   #15
fordxc78
Starter Motor
 
Join Date: Aug 2007
Location: Out West
Posts: 13
Default

That must be why all the good tyre shops have signs saying "all wheel nuts must be hand tightened" these days. They don't make wheel studs (or pretty much anything) like they used to.
fordxc78 is offline   Reply With Quote Multi-Quote with this Post
Old 16-09-2007, 12:18 PM   #16
Bossxr8
Peter Car
 
Bossxr8's Avatar
 
Join Date: Dec 2004
Location: geelong
Posts: 23,145
Default

Similar thing happened to me a few months ago. Rattle gun didn't tighten the nuts enough and they eventually worked loose and the wheel went on its own mystical journey to freedom. Luckily it was only at 20 kph.
Bossxr8 is offline   Reply With Quote Multi-Quote with this Post
Old 16-09-2007, 02:17 PM   #17
XR Martin
FF.Com.Au Hardcore
 
XR Martin's Avatar
 
Join Date: Dec 2004
Location: Canberra Region
Posts: 9,006
Default

Quote:
Originally Posted by fordxc78
They don't make wheel studs (or pretty much anything) like they used to.
More like tyre fitters arnt as smart as they use to be and the rattle guns are alot more powerful.
__________________
2016 FGX XR8 Sprint, 6speed manual, Kinetic Blue #170

2004 BA wagon RTV project.

1998 EL XR8, Auto, Hot Chilli Red

1993 ED XR6, 5speed, Polynesian Green. 1 of 329. Retired

1968 XT Falcon 500 wagon, 3 on the tree, 3.6L. Patina project.
XR Martin is offline   Reply With Quote Multi-Quote with this Post
Old 16-09-2007, 04:56 PM   #18
sprjenkins
Spr Jenkins
 
sprjenkins's Avatar
 
Join Date: Mar 2006
Location: Melbourne
Posts: 597
Default

Yep I had the same thing happen to me, 4 out of 5 studs snapped, lucky the fifth one didn't go and the wheel stayed on. In my case it was the same as Bossxr8, wheel nuts were to loose and that caused the studs to snap. I've actually spoken to a couple of Ford Mechanics and they all reckon that studs on the Falcon most commonly break because the nuts are too loose, not the other way round. Go figure
__________________
-Before Chuck Norris visited them, they were called "The Virgin Islands" Now, they're just "The Islands"

-Mathematicians have found that due to the excessive amount of women Chuck Norris has slept with, it is guaranteed that he appears in your family tree a minimum of three times

-Chuck Norris doesn't sleep. He waits.

-Chuck Norris once worked as a weatherman for the San Diego evening news. Every night he would make the same forecast: Partly Cloudy with a 75% chance of Pain.
sprjenkins is offline   Reply With Quote Multi-Quote with this Post
Old 16-09-2007, 05:46 PM   #19
XD 351 Ute
Excessive Fuel Ingestion
 
XD 351 Ute's Avatar
 
Join Date: Dec 2004
Location: Central Queensland Coast
Posts: 1,586
Default

Quote:
Originally Posted by The Yeti
you young guys these things have been arround since jebus play'd full back

http://www.wallaceracing.com/leafspringtraction.htm
Most cars these days don't have proper suspension like the real cars do,
so how can they know?? :

But on a serious note, I had found the rear wheel nuts loose on my old wagon after a visit to a shopping centre....

Ed
XD 351 Ute is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 06:53 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL