|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
03-11-2016, 10:20 AM | #1 | ||
Parts Interpreter
Join Date: Oct 2010
Location: In a cloud of tyre smoke
Posts: 2,605
|
Hi guys,
The girlfriends focus isn't starting. I can hear the pump prime and when the key is turned to the on position I can hear the relays clicking open in the engine bay but when you turn the key to the start position, nothing happens. Radio turns off like usual but the starter won't crank. Any ideas?
__________________
BFMKII XR6 Turbo Sedan
6sp Manual Pedders Coilovers Short Throw Shifter |
||
03-11-2016, 11:28 AM | #2 | ||
FF.Com.Au Hardcore
Join Date: Jan 2009
Location: Victoria
Posts: 877
|
What is the battery voltage? What does it drop to when trying to start?
Does it start if jumpered to another car? Does it start if you tap on the starter whilst cranking? Hard to get to - under the intake manifold |
||
03-11-2016, 11:48 AM | #3 | ||
Parts Interpreter
Join Date: Oct 2010
Location: In a cloud of tyre smoke
Posts: 2,605
|
Car won't jump start, battery voltages are fine.
__________________
BFMKII XR6 Turbo Sedan
6sp Manual Pedders Coilovers Short Throw Shifter |
||
03-11-2016, 02:00 PM | #4 | ||
FF.Com.Au Hardcore
Join Date: Jul 2008
Location: Melbourne
Posts: 804
|
from what you say you either have a bad starter solenoid or a loose battery/starter terminal Battery needs to show at least 12.5-13 volts to be OK make sure the jumper leads are heavy as cheap ones will not carry enough current.
Check for loose connections as the solenoids rarely fail |
||
03-11-2016, 02:10 PM | #5 | ||
FF.Com.Au Hardcore
Join Date: Jan 2009
Location: Victoria
Posts: 877
|
Agreed, check battery terminals, starter motor/solenoid connections.
Verify 12+V at the starter solenoid - will be the thicker cable. |
||
06-11-2016, 12:57 AM | #6 | ||
Regular Member
Join Date: Feb 2013
Posts: 446
|
Auto or manual ,?
|
||
07-11-2016, 09:41 AM | #7 | ||
Parts Interpreter
Join Date: Oct 2010
Location: In a cloud of tyre smoke
Posts: 2,605
|
Auto. Had a bit of time over the weekend had a look at the starter relay, it wasn't stuck. Opened the fuse box and checked a few relays. Turns out the starter relay was broken. $9 later and we have a repaired focus.
__________________
BFMKII XR6 Turbo Sedan
6sp Manual Pedders Coilovers Short Throw Shifter |
||
07-11-2016, 10:33 AM | #8 | ||
FF.Com.Au Hardcore
Join Date: Jan 2009
Location: Victoria
Posts: 877
|
Cheap fix! Nice job
|
||