|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
26-09-2016, 04:53 PM
|
#1 | ||
|
Starter Motor
Join Date: Aug 2013
Posts: 13
|
Hi I'm doing a mini resto on my mk2 rs 2000 I have water entry into the lh side of the boot. I have tracked it back to entering via the lh c pillar vent . There is no visible rust in the pillar or vent internal or external does anybody know where water that enters the vent drains ? I'm guessing the drain is blocked somehow
I have compared left to right and visually they look the same from the inside boot angle and removing the external vents as well |
||
|
|
|
30-09-2016, 06:40 AM
|
#2 | ||
|
Regular Member
Join Date: Dec 2014
Posts: 43
|
There is no drain, best left to drain to the boot and out the drain hole. This is what caused the pillars to rust. Water was trapped in the cup as there was a seal between the cup and outer skin. This was all part of the flow through ventilation.
|
||
|
|
|
|
30-09-2016, 12:26 PM
|
#3 | ||
|
Starter Motor
Join Date: Aug 2013
Posts: 13
|
Wow that surprises me I'm concerned now that the rh one doesn't drain at all
Thanks |
||
|
|
|
Water entry
Linear Mode
