Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 16-05-2007, 07:48 PM   #1
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default Great 1/4 mile calculator

http://www.nationaldrivetrain.com/calcs/dragcalc.html

I used this calculator to see how good it was. I had 2 dyno numbers at the same time from 2 different dynos. 131 rwkws and 147 rwkws.i was very confused as to which dyno was correct.Both were dyno dynamic dynos.
My cars weight 3700 pounds with 147rwkws(197hp) estimated my et as 14.78.

The second dyno 131 rwkws (175 horsepower gave me a figure for the 1/4 mile of 15.32. It is highly likely the 131 rwkw figure is wrong.
Plug some figures in and see how you go..

__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 16-05-2007, 07:59 PM   #2
au2sw
Blown 5L coming
 
au2sw's Avatar
 
Join Date: Dec 2006
Location: Warwick, QLD
Posts: 1,997
Default

how heavy is a wagon in pounds?
__________________
1995 EF Fairmont was stocko 6cyl with open single spin diff....NOW WITH XR8 ENGINE, DRIVELINE AND SUSPENSION!!!!! Maybe by the end of 2010 there may just be a blower as well ;)


NEW CLUB FOR SUNSHINE COAST !! www.f-p-e.proboards.com

Contact Col (au2sw) via PM or on MSN @ efmonty@hotmail.com

Quote:
Originally Posted by Mr Hardware
Its like central locking in your car. We've all had cars without it and we were fine then, but try and take it from me? NO WAY.
au2sw is offline   Reply With Quote Multi-Quote with this Post
Old 16-05-2007, 08:06 PM   #3
MoreHPformyXR6
FF.Com.Au Hardcore
 
MoreHPformyXR6's Avatar
 
Join Date: Jan 2006
Location: FoMoCo
Posts: 3,441
Default

Quote:
Originally Posted by Stav
http://www.nationaldrivetrain.com/calcs/dragcalc.html

I used this calculator to see how good it was. I had 2 dyno numbers at the same time from 2 different dynos. 131 rwkws and 147 rwkws.i was very confused as to which dyno was correct.Both were dyno dynamic dynos.
My cars weight 3700 pounds with 147rwkws(197hp) estimated my et as 14.78.

The second dyno 131 rwkws (175 horsepower gave me a figure for the 1/4 mile of 15.32. It is highly likely the 131 rwkw figure is wrong.
Plug some figures in and see how you go..
Sounds great love to have a go. What's the formula to convert 161.2rwkw to HP? What's the formulat to convert kilo's to pounds I thimk the BA XR6 NA is 1709kg anyone?
__________________
FGX XR6 Lightning Strike Sedan

BA XR6 Mk II Shockwave Sedan - Now Sold - gone but not forgotten

mods: 20% under drive, Pacemaker Comps 4495' (ceramic coated) , 3' Metal Cat, XR6T exhaust - twin 3' tips, F6 CAI, K&N panel filter, PWR trans cooler, customed tuned by Heinrich Performance Tuning HPT 183.7rwkw.


Quote:
Originally Posted by ATMO SIX
You have become the new SLOANY mate, no real quality to your current post(s).
MoreHPformyXR6 is offline   Reply With Quote Multi-Quote with this Post
Old 16-05-2007, 08:14 PM   #4
Hibbz
The Mod Bug Has Hit
 
Hibbz's Avatar
 
Join Date: Jan 2006
Location: Geelong
Posts: 241
Default

so stav going by that calculator you should be getting close to a flat 14. Are you running at the drags next weekend for aff drags

Jake
__________________
www.aufalcon.com/jakesfalcon
Hibbz is offline   Reply With Quote Multi-Quote with this Post
Old 16-05-2007, 08:14 PM   #5
Casper
FF.Com.Au Hardcore
Contributing Member
 
Casper's Avatar
 
Join Date: Dec 2004
Posts: 12,083
Default

not even close for my car
__________________
Older, wiser, poorer.


Now in Euro-Trash. VW Coupe V6 4motion.
Casper is offline   Reply With Quote Multi-Quote with this Post
Old 16-05-2007, 08:17 PM   #6
jonbays
TL40 Wagon?
 
Join Date: Dec 2004
Location: Sydney
Posts: 2,377
Default

OK i gave it a go.

My wagon weighed in at 1650 on the WSID scrutineering bay so with me in it its 1730KG on the track so that 3806lbs don't know how much lighter the Futura is but 3700 seems light fo race weight to me. Any way power wise pick a number from any one of a million dynos i have beem on say 140kw or 188hp and i get 15.16 @85.94mph?

Since i can be very sure on the weight going backwards from my best time gives me 177HP or 132kw at 15.46 but @84.24mph? I need to have almost 225HP to get the TS that I can get on the track on the calculator. I reckon it means the car is overgearewd which it is of course.
jonbays is offline   Reply With Quote Multi-Quote with this Post
Old 16-05-2007, 08:20 PM   #7
b2tf
not here much anymore
 
b2tf's Avatar
 
Join Date: Dec 2004
Location: Sthn NSW
Posts: 22,918
Default

wow, 170rwkw equals a 14.05 qtr time. amazing!
__________________
2024 F150 XLT
b2tf is offline   Reply With Quote Multi-Quote with this Post
Old 16-05-2007, 08:22 PM   #8
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default

Quote:
Originally Posted by Casper
not even close for my car
No because your dyno is wrong..like one of mine was.
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 16-05-2007, 08:24 PM   #9
Casper
FF.Com.Au Hardcore
Contributing Member
 
Casper's Avatar
 
Join Date: Dec 2004
Posts: 12,083
Default

Quote:
Originally Posted by Stav
No because your dyno is wrong..like one of mine was.
Even editing it to meet the ET the MPH is totally screwed. I'll stick to calculating ET's by driving down the black stuff really fast
__________________
Older, wiser, poorer.


Now in Euro-Trash. VW Coupe V6 4motion.
Casper is offline   Reply With Quote Multi-Quote with this Post
Old 16-05-2007, 08:25 PM   #10
jonbays
TL40 Wagon?
 
Join Date: Dec 2004
Location: Sydney
Posts: 2,377
Default

I think its pretty close to be useful if you assume its race weight not just the kerb weight in pounds 2.2 of those for every kilo and that is rear wheel horsepower 1.3 of those for evry kw. It probably also assumes perfect launch and gearing so it would be the ideal not always achievable.
jonbays is offline   Reply With Quote Multi-Quote with this Post
Old 16-05-2007, 08:27 PM   #11
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default

The mph is out but it is uncanny how it perfectly gave me my real already run et when I plugged in my weight/rpm and power...exactly.
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 16-05-2007, 08:31 PM   #12
TheSneakiness
Adapt or perish...
 
TheSneakiness's Avatar
 
Join Date: Jan 2005
Location: Dip!@#$
Posts: 7,954
Default

Gave me a lower MPH reading, and my time should be .8 of a second quicker than it is...
__________________
Carless
TheSneakiness is offline   Reply With Quote Multi-Quote with this Post
Old 16-05-2007, 08:31 PM   #13
Casper
FF.Com.Au Hardcore
Contributing Member
 
Casper's Avatar
 
Join Date: Dec 2004
Posts: 12,083
Default

Given that your wagon and my xr6 are almost the same weight and run identical times.. that would mean almost identical rwkw I guess. I just dont think they are accurate as gearing and torque are totally ignored. Not to mention grip, track conditions and even transmission type
__________________
Older, wiser, poorer.


Now in Euro-Trash. VW Coupe V6 4motion.
Casper is offline   Reply With Quote Multi-Quote with this Post
Old 16-05-2007, 08:32 PM   #14
au2sw
Blown 5L coming
 
au2sw's Avatar
 
Join Date: Dec 2006
Location: Warwick, QLD
Posts: 1,997
Default

ok, using 3800pounds and running my 2 figures (petrol and gas) i get
15.94@81.8mph for petrol
16.35@79.8mph for LPG
__________________
1995 EF Fairmont was stocko 6cyl with open single spin diff....NOW WITH XR8 ENGINE, DRIVELINE AND SUSPENSION!!!!! Maybe by the end of 2010 there may just be a blower as well ;)


NEW CLUB FOR SUNSHINE COAST !! www.f-p-e.proboards.com

Contact Col (au2sw) via PM or on MSN @ efmonty@hotmail.com

Quote:
Originally Posted by Mr Hardware
Its like central locking in your car. We've all had cars without it and we were fine then, but try and take it from me? NO WAY.
au2sw is offline   Reply With Quote Multi-Quote with this Post
Old 16-05-2007, 08:33 PM   #15
jonbays
TL40 Wagon?
 
Join Date: Dec 2004
Location: Sydney
Posts: 2,377
Default

Quote:
Originally Posted by au2sw
how heavy is a wagon in pounds?
Well the brochure I have says 1645kg for may AUII Fairmont wagon and on the weighbridge it was 1650kg so it would appear accurate. Futura and forte would be lighter say 1575 odd maybe?

Here is the fairmont spec sheet

http://www.fordforums.com.au/photos/...cat=500&page=1
jonbays is offline   Reply With Quote Multi-Quote with this Post
Old 16-05-2007, 08:34 PM   #16
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default

So what are you guys getting down the 1/4 and mph? I already mentioned the mph is incorrect in the calc.

I plugged deathxr power in and it seems to think he can pull a 14.56
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 16-05-2007, 08:34 PM   #17
jonbays
TL40 Wagon?
 
Join Date: Dec 2004
Location: Sydney
Posts: 2,377
Default

Quote:
Originally Posted by au2sw
ok, using 3800pounds and running my 2 figures (petrol and gas) i get
15.94@81.8mph for petrol
16.35@79.8mph for LPG
Those would be honest enough ET's the TS seem low though. Certainly mine ran 16.8 best stock u know!!! : (
jonbays is offline   Reply With Quote Multi-Quote with this Post
Old 16-05-2007, 08:35 PM   #18
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default

Quote:
Originally Posted by Casper
Given that your wagon and my xr6 are almost the same weight and run identical times.. that would mean almost identical rwkw I guess. I just dont think they are accurate as gearing and torque are totally ignored. Not to mention grip, track conditions and even transmission type
Hmm maybe its just me that got the perfect et match?
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 16-05-2007, 08:41 PM   #19
jonbays
TL40 Wagon?
 
Join Date: Dec 2004
Location: Sydney
Posts: 2,377
Default

yeh its nver going to be right for everyone its a calculator thats all. not bad almost as amusing as a gtech and a lot less amusing than actually running your car down the strip.

Slips rule dyno charts 1/4 calcs gtech asn all that sort of stuf is just F5643
jonbays is offline   Reply With Quote Multi-Quote with this Post
Old 16-05-2007, 08:42 PM   #20
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default

Quote:
Originally Posted by Stav
Hmm maybe its just me that got the perfect et match?
Nar ..at the end of the day to move a certain weight across 2 fixed point...being the starting line and finsh line requires a certain amount of power.Gearing ,traction and other similar mods change the power delivery. Therefore you have a ceratain amount of power put to the ground to get there in the specified time or et. To get from point a to point b in the same time at same weight then the car across the track must deliver the same average power despite dyno mumbo jumbo differences
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 16-05-2007, 08:47 PM   #21
Sourbastard
Moderator
Contributing Member
 
Sourbastard's Avatar
 
Join Date: Dec 2004
Location: Adelaide SA
Posts: 5,584
Default

theres much more to the 1/4 then power and weight. these calculators are more of a novelty toy for mastabatorial technicians.
__________________

1965 XP Falcon Deluxe Sedan
1978 XC Falcon Wagon Rallypack
2003 BA Fairlane G220

Windsor Powah!!! http://www.youtube.com/watch?v=m7hT9dxD2hM

Sourbastard is offline   Reply With Quote Multi-Quote with this Post
Old 16-05-2007, 08:54 PM   #22
jonbays
TL40 Wagon?
 
Join Date: Dec 2004
Location: Sydney
Posts: 2,377
Default

Quote:
Originally Posted by sourbastard
theres much more to the 1/4 then power and weight. these calculators are more of a novelty toy for mastabatorial technicians.
Well i wouldnt have put it quite that way but ...
jonbays is offline   Reply With Quote Multi-Quote with this Post
Old 16-05-2007, 09:05 PM   #23
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default

Quote:
Originally Posted by sourbastard
theres much more to the 1/4 then power and weight. these calculators are more of a novelty toy for mastabatorial technicians.
Thanks for the input mate.That helped the topic heaps.Youve invented new words for the dictionary. :
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 16-05-2007, 09:20 PM   #24
Sourbastard
Moderator
Contributing Member
 
Sourbastard's Avatar
 
Join Date: Dec 2004
Location: Adelaide SA
Posts: 5,584
Default

its true, like it or not, its a fantasy land toy. It cant calculate track temperature, driver ability, suspension stiffness, traction, wind direction, aerodynamics. These details can vary the result hugely.

At best its a magic 8 ball of drag racing.

"Will I run an 11 second quarter?"
"Outlook not good"
__________________

1965 XP Falcon Deluxe Sedan
1978 XC Falcon Wagon Rallypack
2003 BA Fairlane G220

Windsor Powah!!! http://www.youtube.com/watch?v=m7hT9dxD2hM

Sourbastard is offline   Reply With Quote Multi-Quote with this Post
Old 16-05-2007, 10:15 PM   #25
au2sw
Blown 5L coming
 
au2sw's Avatar
 
Join Date: Dec 2006
Location: Warwick, QLD
Posts: 1,997
Default

trust sourbastard to bring us back to reality:love it and i vote the mastabatorial technicians wins phrase of the year!!! : out: :sm_headba
__________________
1995 EF Fairmont was stocko 6cyl with open single spin diff....NOW WITH XR8 ENGINE, DRIVELINE AND SUSPENSION!!!!! Maybe by the end of 2010 there may just be a blower as well ;)


NEW CLUB FOR SUNSHINE COAST !! www.f-p-e.proboards.com

Contact Col (au2sw) via PM or on MSN @ efmonty@hotmail.com

Quote:
Originally Posted by Mr Hardware
Its like central locking in your car. We've all had cars without it and we were fine then, but try and take it from me? NO WAY.
au2sw is offline   Reply With Quote Multi-Quote with this Post
Old 17-05-2007, 03:31 PM   #26
Futura01
horsepower
 
Join Date: Jan 2006
Location: Sydney
Posts: 320
Default

i just tried it and got this:

Vehicle Weight (in pounds in me): 3520
Vehicle Horsepower: 196.83hp rear wheels
RPM through lights (finish line): n/a
Tire Diameter (Hght.) in Inches: 16"
1/4 Mile ET: 14.51
1/4 Mile Top End Speed: 89.74
1/8 Mile ET: 9.24
Futura01 is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 03:27 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL