|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
05-03-2014, 08:06 PM
|
#1 | ||
|
Regular Member
Join Date: Jun 2006
Location: Wantirna South, Melbourne
Posts: 425
|
I have an oil leak at the front of the engine. Oil is dropping onto the ground from the plastic guard that sits close to the sump. Some oil has run along the bottom of the sump. I am sorry I cannot describe it better or provide a photo. I suspect it could be the cam chain tensioner. Any other ideas guys?
|
||
|
|
|
05-03-2014, 10:03 PM
|
#2 | ||
|
Auto Nerd
Join Date: Feb 2012
Location: Sydney
Posts: 808
|
There are a few areas that a prone to leaks. Like you mentioned the chain tensioner and the corners where the timing cover meets the head are quite common.
Other areas will be the timing cover gasket - the bolts can work themselves loose. The cam sensor has an O ring that can leak. The crank seal. Sump gasket. Oil can also weep through the three holes where the belt tensioner is bolted to the timing case. |
||
|
|
|
|
06-03-2014, 01:37 PM
|
#3 | ||
|
64 Deluxe 4 door
 
Join Date: Jun 2007
Location: Raxacoricofallapatorius
Posts: 10,410
|
get some ramps, a rain coat and a box of degreaser. Clean all the oil/gunk off, pull the fans if you have to, then when its spotless go for a short drive. you should be able to see evidence of where the leak is. the plastic wind tray is pretty easy to get off if you need better access. what grade oil are you using?
__________________
XM Deluxe FG XR50 BA Pursuit Ute |
||
|
|
|
| This user likes this post: |
|
06-03-2014, 07:52 PM
|
#4 | |||
|
Regular Member
Join Date: Jun 2006
Location: Wantirna South, Melbourne
Posts: 425
|
Quote:
|
|||
|
|
|
Engine Oil leak
Linear Mode
