|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| OzECruisers General Discussions E/N/D vehicles General Discussion ONLY. NO TECH THREADS |
 |
|
|
Thread Tools | Display Modes |
11-02-2007, 10:08 PM
|
#1 | ||
|
ORSM FORD CRUSIERS
Join Date: Apr 2005
Location: ELTHAM
Posts: 2,297
|
hey,
im wondering, how to reset the base idle speed on a EB XR6, i have searched the forums and found nothing, i have since sold my car and given my workshop manual away so here is my next best option, if you know let us know. cheers Tristan
__________________
BLUEPOWER RACING DEVELOPMENTS Strive for perfection in everything we do. Take the best that exists and make it better. When it does not exist, design it. Accept nothing nearly right or good enough. -[BLKPHN] (VIC) PLATES FOR SALE $495.00-
|
||
|
|
|
11-02-2007, 10:59 PM
|
#2 | ||
|
MADED.6
Join Date: Jul 2005
Location: Werribee
Posts: 2,676
|
its adjustable on the throttle body i dont no how to set it though.
cheers josh.
__________________
TUFAU-8 Get Stroked. AU Stroked 5.6L GHIA |
||
|
|
|
|
13-02-2007, 07:01 PM
|
#3 | ||
|
Riding The Lightning
Join Date: Apr 2006
Posts: 958
|
yeah there is an idle adjusting screw on the throttle body but you shouldnt really need to touch it, it should be set properly if it hasnt been screwed around before, here is what you should try first, you will need a clock/watch for this and car has to be running and at operating temperature and it is best to keep the handbrake on and your foot on the brake:
For 1 minute keep the car in neutral For the second minute keep the car in drive For the third minute put the car back into neutral with the a/c on For the fourth minute put the car back into drive with the a/c still on and then when the fourth minute finishes turn the ignition off, put car into park, turn a/c off, then start the car and it should be idling right
__________________
ED XR6 - T5 - 1521a@112 - 3.9's - 170.2rwkw - POWERED BY METALLICA |
||
|
|
|
|
13-02-2007, 07:12 PM
|
#4 | ||
|
EBII XR6
Join Date: Jul 2006
Location: Bendigo. Victoria
Posts: 5,278
|
how about for a manual? my car idles very low.
__________________
DEVLXR
|
||
|
|
|
|
13-02-2007, 07:36 PM
|
#5 | ||
|
bettering 13.7
Join Date: Dec 2004
Location: perth
Posts: 528
|
1) make sure the car is at operating temp
2) with engine off disconnect the ISC 3) start engine and turn base idle screw until rpm is correct (450-600rpm) 4) stop engine and reconnect the ISC also it wouldn't hurt to clean your ISC
__________________
std stroke, alloy heads, comp cam, tfs manifold, 75mm t/b, 70mm maf, 30lb inj, adj fuel press reg, twEECer FPV/Tickford Club of W.A Performance is Electronic BPT Motorsport |
||
|
|
|
|
15-02-2007, 10:32 AM
|
#6 | ||
|
EBII XR6
Join Date: Jul 2006
Location: Bendigo. Victoria
Posts: 5,278
|
Sorry i think i've asked this question before but where is the ics, well i know its near the throttle body but i'm not sure which part it is. And how do you disconnect it? Pics would be a help!
__________________
DEVLXR
|
||
|
|
|
|
15-02-2007, 12:25 PM
|
#7 | ||
|
Guest
Posts: n/a
|
i think its that small round cylinder that sits on top of the throttle body. It has a wiring plug connected to it.
Someone before mentioned to adjust it to 450-600. Isnt that a little low? Should be around 750rpm in park and 550-600 in drive with foot on the brake |
||
|
|
|
15-02-2007, 01:49 PM
|
#8 | ||
|
EBII XR6
Join Date: Jul 2006
Location: Bendigo. Victoria
Posts: 5,278
|
my car is a manual btw and it normally idles at around the first mark of the rev gauge!
__________________
DEVLXR
|
||
|
|
|
|
15-02-2007, 02:43 PM
|
#9 | |||
|
Guest
Posts: n/a
|
Quote:
what was Ford thinking? |
|||
|
|
|
15-02-2007, 02:48 PM
|
#10 | ||
|
EBII XR6
Join Date: Jul 2006
Location: Bendigo. Victoria
Posts: 5,278
|
modern way of life mate! Manuals have to be ordered now! I think i had more luck since its an xr6.
__________________
DEVLXR
|
||
|
|
|
Base Idle Speed Eb Xr6
Linear Mode
