|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
21-05-2009, 07:14 PM
|
#1 | ||
|
XR6
Join Date: Dec 2008
Location: Victoria
Posts: 114
|
Guys
This goes on from my previous thread on worn top shock mounts (IRS)!!! I bought a suitable deep socket to remove rear pack nut today. I cracked & removed the pack nut off afterwork. Unbolted upper & lower control arms. The hub & knuckle were ready to come out BUT the toe link after it was unbolted is STUCK!!!!!!!!! I can't remove it from the knuckle even when using a tie rod seperator lever, mash hammer & trolley jack!!!! I tried unbolting the toe link at the inner mounting bolt (centre of car) BUT the bolt won't come out cos it hits the fuel tank..... what a crap design!!!! So I'm STUCK.... Has anyone experienced this & any ideas on how to get the toe link joint off the knuckle?????  : |
||
|
|
|
21-05-2009, 08:49 PM
|
#2 | ||
|
MADED.6
Join Date: Jul 2005
Location: Werribee
Posts: 2,676
|
soak it in wd40 or rost off ice or something similar and leave it for 10-15mins then smash it with a hammer worked for me but u will get to a point where u think nah that aint coming off then itll just pop off in a good hit.
cheers josh.
__________________
TUFAU-8 Get Stroked. AU Stroked 5.6L GHIA |
||
|
|
|
Au IRS Rear Hub Problem
Linear Mode
