Turbo Manifolds - Where And How Much?

Andrewb · 03-04-2006, 06:45 PM

hi guys

just want to find a place that does a turbo manifold for a EB in sydney.
or is there a place you can take in your your old one to get it custom made?

snypereb · 03-04-2006, 07:04 PM

If you have a look through the threads im pretty sure the is a group purchase at the moment going on!!

heckaz performance · 08-04-2006, 02:29 PM

Yeah Bud,
$650 for the Snort Turbo Manifold with the group buy. Usually they are $950.

They have a 12 month warranty
And a flange that fits T3 to GT45 Turbos
They are made from Stainless Steampipe

Check out the thread E-Series Turbo Manifolds group buy :sm_headba

LUXO_8 · 08-04-2006, 02:38 PM

why do people just say "look at a thread" without supplying the link for the person to actually look at.....

here is the link to the eseries turbo manifold group buy thread

http://www.fordforums.com.au/showthread.php?t=42386

XRated · 08-04-2006, 02:40 PM

Quote:

Originally Posted by MADNC_8

why do people just say "look at a thread" without supplying the link for the person to actually look at.....

here is the link to the eseries turbo manifold group buy thread

http://www.fordforums.com.au/showthread.php?t=42386

Wayne you grumpy old bastard, you must be getting old LOL!! :party3: But probably the same reason most people don't bother searching beforehand.

LUXO_8 · 08-04-2006, 02:53 PM

Quote:

Originally Posted by XRated

Wayne you grumpy old bastard, you must be getting old LOL!! :party3: But probably the same reason most people don't bother searching beforehand.

lol. :jab:

heckaz performance · 08-04-2006, 04:33 PM

Sorry MadNC 8, I am not so good with computers, so thanks for posting the link. You are a champ, it probably would have taken me half an hour to figure out what to do.

snypereb · 08-04-2006, 05:38 PM

Quote:

Originally Posted by MADNC_8

why do people just say "look at a thread" without supplying the link for the person to actually look at.....

here is the link to the eseries turbo manifold group buy thread

http://www.fordforums.com.au/showthread.php?t=42386

Sorry mate

heckaz performance · 11-04-2006, 03:17 PM

Can now do e-series log style Turbo

: Manifolds for $480

:

Taking orders now.
Limited time only

:

ebs_4l · 12-04-2006, 02:14 AM

heres what i offer

http://www.fordforums.com.au/showpos...9&postcount=27
http://www.fordforums.com.au/showpos...7&postcount=40

heckaz performance · 13-04-2006, 03:57 PM

Get your own Thread.

Just Joking

:

:jab: :jab: :jab: :jab: :jab:

Stirin' you :Up_to_som

dansedgli · 13-04-2006, 04:01 PM

Quote:

Originally Posted by heckaz performance

Get your own Thread.

WTF!! You didnt make this thread?

heckaz performance · 13-04-2006, 04:04 PM

I forgot to write just joking,
by the time I got here, to edit,
you had already wrote that.

I've had a few beers, dude

dansedgli · 13-04-2006, 04:08 PM

Okay then, fair enough. Wheres my beer! :P

heckaz performance · 13-04-2006, 04:14 PM

:baby bott :baby bott :baby bott

I'm drinking it for ya now.

Eu-GenixX · 13-04-2006, 04:50 PM

oh yeah.. i better confirm in that other thread.. heh

Eu-GenixX · 19-04-2006, 08:56 AM

umm.. where did the turbo manifold group buy thread go?

heckaz performance · 19-04-2006, 09:46 AM

I think the Moderators removed it.
While I was banned.
I'm not supposed to do bussiness on the site unless I am a sponsor.
I am awaiting a reply on how to become a sponsor.

I'm Back!

Eu-GenixX · 19-04-2006, 10:05 AM

how was organising a group buy doing business?

unless of course you are a business? then i can understand...

damn it... was looking forward to the manifold...

heckaz performance · 19-04-2006, 10:32 AM

Have you done a google search, for Turbo Manifolds for eb,ef,whatever?
may help, and give a few choices, prices etc.
Even other Forums, Bussiness names, etc.
You then can compare them all.
Just a suggestion.

You can buy the Turbo Flanges for under $50 and have your stock manifold modified, by your local welding or engineering shop, for $50-$150 if on a low budget, As you mentioned in you original post.

Log Manifolds have been proven up to 300rwkw on e-series, and can be had from around $500+
Tuned length have made up to 400rwkw+ and are avail. from around $650+

hope this helps

Eu-GenixX · 19-04-2006, 12:22 PM

yeah... i got mates who can make ИИИИ if i really want... was just a good price on those snort ones you had going...

heckaz performance · 19-04-2006, 05:06 PM

Hello ,
Eu-GenixX, mate,
Have you tried that other forum,( No .au).
Sometimes it has stuff for sale, no probs.
I will try to become a Sponsor so I can speak freely again, and do bussiness on this Forum.

Eu-GenixX · 19-04-2006, 06:11 PM

i just missed a group buy elsewhere for the same manifold... that was a bugger
might just have to sit on my hands.. and wait for another opportunity to arise...

heckaz performance · 19-04-2006, 06:57 PM

Dude, have you seen the other forum at all?
I'm pretty sure you can just sell stuff no worries. I saw a Turbo manifold group buy there. :togo: Its the same, just no .au on the web address.
Hope this helps dude

:

heckaz performance · 19-04-2006, 07:30 PM

Yours look ok,
dansedgli, but I'm into racing and drifting, and wonder about the heat of the pipe being so close to the steering knuckle.
Do you offer a warranty?
Also, how are you allowed to show them (turbo Manifolds) with a price, as I got banned, and have been told I will get banned permanently for doing less?
or if I try similar?
Are you a site Sponser?
Wasn't it you who mentioned (complained about) this on the Turbo Manifold group buy thread?,
and it was shut down within minutes?
Don't You already have a Turbo Ford?
Whats she run?

dansedgli · 19-04-2006, 07:48 PM

Umm Im not selling manifolds.

I mentioned it in the other thread becauss snortingboost was blatantly knocking other poeples work without evidence of them being inferior.

I was under the impression that you were doing this to get a cheap manifold yourself and not actually selling them to make a profit.

Unlike Snortingboost who was promoting the manifolds while knocking the work of others in an unprofessional manner. He was promoting his business while not being a sponser which is why the thread was closed i think.

Are you selling these manifolds to make a profit for yourself? If not then I would ask the mods to reinstate that thread and keep snorting boost to keep his biased opinions to himself.

If it were me I would deal with Geoff from Snort directly. He seems like a good guy from what Ive experienced.

edit: Ive had a turbo EB which ran a 13.67 and a turbo AU XR6 which went 11.81@120mph. I dont own a turbo ford at the moment, Im building an LC torana with a RB30 in it.

heckaz performance · 19-04-2006, 08:20 PM

Yes, Cheers Dans,
Thanks heaps for that.
I just caught a glimpse of what you were saying, before the thread was pulled, and I remember you saying that. I didn't really know why, and have asked the Mods to check it out.
Like I said eb 4l's look ok,
And so do Snorts and 6boosts as well as others.
I just wanted cheaper Turbo Manifolds,
so I orginised a group buy, for the best price.
I don't work for any of them and asked them all for their prices.
I actually work in construction (concrete coatings).
What Turbo and Fuel system did you have on the AU?
Pretty good times.

dansedgli · 19-04-2006, 08:28 PM

Those manifolds above are eb_4lt's. I dont make them. I wish I could!

The AU just ran regular premium fuel, 14psi through a GT3540 on a manifold made by Gas research before Jason Ghiller left them. It had a cam, forged pistons and the auto was worked and had a 2500 high stall. It was a great car but I couldnt get insurance!

:

heckaz performance · 19-04-2006, 08:40 PM

Sounds like a sweet AU,
Did it run an aftermarket computer, or GAS?
I remember their (Gas Reaserch or TSA) Turbo Manifolds.
They never replied regarding a price though,
But thanks to them developing a kit, there is a Turbo chip available.
Look, honestly, most, if not all of the manifolds look top quality, whether it be Snort,JMM,6boost,TSA,etc.
Dansedgli, they were eb4l's manifolds, It all happened in a blink of an eye when the Thread was about to vanish.

:

dansedgli · 19-04-2006, 08:53 PM

It had a haltech e11v in it.

Jason's manifolds were the best for ages. Unfortunately the guy who made them is away for a while. The same manifolds are on a 10.2 second XE with an AU engine and EZY10 the high 10 second XF. Both are straight gas.

Its great to see so many people getting into the falcon 6 manifold market.

I like 6BOOST's work personally but only because I have known him for ages. He gave me advice on doing a turbo falcon nearly 4 years ago :P. He also had the first well known big power falcon that was featured in Zoom. He gave me a good deal on my whole setup as well which was another plus.

Snort's look really good now as well, he has come a long, long way from when he first started making them. His manifolds are really affordable in comparison to other peoples work as well which is a plus.

If I was to do another ford 6 I would use a log style manifold, there is no reason not to IMO. They seem to be more responive and good enough for over 300rwkw. With the right transmission thats well into the 10 second zone.

Has anyone got a photo of a JMM manifold? Thats the only one I havent seen a photo of yet.